Satellite A60 found new hardware wizzard problems

Similar Questions

• How can I get rid of the Wizzard found new hardware: device modem on bus high definition audio kept popping up each time after I logged in my computer?

  How can I get rid of the screen of "Found New Hardware Wizzard: device modem on high definition audio bus" that kept appearing on my screen each time after I log on my computer?  Thank you.

  If uninstall you it, it will all come immediately the next time you reboot and start bugging again.

• Found New Hardware "Microsoft UAA Bus Driver for High Definition Audio".

  Hello, here is the whole of it.  I recently bought a card XFX ATi Radeon HD 4650 1 GB DDR2 video AGP8x.  I uninstalled my old graphics card driver and took out my old nvidia card.  I threw in the radeon and started my computer.  Now it starts windows and the bubble 'new hardware found' in the bar tasks appear, 1 saying he concluded a 'video something.' Then a 2nd bubble appears who says: "Microsoft UAA Bus Driver for High Definition Audio" Word for Word. As this bubble appears, my computer slows down as if the RAM has been withdrawn, and after about 30 seconds, it is a gel closely.  I can't install my drivers for the radeon and I have to turn off manually my computer is not responding.

  Now, I have tried

  • Install the drivers before I put in the graphics card
  • Research on the XFX site for possible solutions
  • Turn off the "found new hardware found" I don't not succsesfully.
  I also tried many other things, but none worked.  If anyone has a solution to this answer please problem.  All I want is my graphics card to work.  Thank you

  I had exactly the same problem.  The instructions on the following link solves the problem.
  http://www.boredsysadmin.com/search/?q=UAA+bus+driver+for+high+definition+audio&search.x=42&search.y=8

  Then, I came across a problem where pilots would not charge because the card was not recognized.  This has been fixed with this patch.
  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• Found new hardware message: but no new hardware has been installed

  Why "found new hardware message" come when nothing new has been installed?

  What material he found?

  In addition, it often happens or happened only once?

• Found New Hardware Wizard will not let me install things.

  Hello.
  I have Windows XP and every time I try to plug something for the 1st time, such as a USB, a window that reads the found new hardware wizard appears. He asks me if windows update can search for new software. It gives me so "Yes, always", "Yes just for this" or "no, not this time". No matter that we I press, another window appears which says ' if it came with an installation cd put in now "then gives me the options either"install the software automatically or manually." When I press the other, she begins searching and, after a minute or two, a window appears saying that the software had failed the compatibility test, even when I got from devices that say they are compatible with windows xp. Then it gives me the option to stop or to continue. No matter what I press, the Hardware Wizard says there is an error and closes. Subsequently, it will not recognize the USB and I have to uninstall it.  This also occurs when you try to install things like itunes.
  Someone help me please. I have not tried it on other computers because I have no one else at my disposal. I tried to contact the company USB but I was told that it's a computer, not a jumpdrive, question.

  Thank you for your help.

  Try the steps in the below given Web site

  http://www.technipages.com/disable-has-not-passed-Windows-logo-testing-message.html

• found new hardware MTP device keeps poping up

  in the status bar icon keeps popping up saying found new hardware MTP device.

  nothing is connected, and when I go to add new hardware, it says something is currently installing a custom let me go any further.

  When I click the x or right click on it, it goes for a few seconds and then just comes back.

  How do I get this go away permanently?

  Hello

  · Have you already connected any device Media Transfer Protocol (MTP)?

  Media Transfer Protocol devices are devices such as the digital camera or digital audio players.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. click view under view hidden devices

  d. expand all winks in Device Manager

  e. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer restart the computer.

• popup "Found New Hardware MTP Device"

  I have a pop-up "Found new hardware device MTP" constantly to come. I can't get rid of even try go to control panel > Menu start & task bar but can't find it. Can anyone help?

  You have an MP3 of some sort?

  Maybe you've seen this?
  http://forums.CNET.com/7723-7595_102-229230.html

  My advice - however - is to get the latest software and drivers for whatever the device originally this message pop up.  Like I implied--probably an MP3 player.

• How to stop "FOUND NEW HARDWARE tool"

  Whenever I start up I get the message "FOUND NEW HARDWARE TOOL' up to four 4 times before so I can continue."  How in the heck to I get rid of this.  It is also irritating as my HP printer messages all the time!  LEA

  Hi LEA J.HIGGINS,.

  ·          Did you the latest changes on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  The new hardware wizard may detect the printer device after every restart of the computer

  http://support.Microsoft.com/kb/298370

  If the previous step fails, then check in the Device Manager to see if a device does not work or pilot device tries to install at the start.

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

• "Modem on Bus High Difinition Audio device" error on found new hardware when you start your laptop Gateway mx 6214. He can not find a driver to install and fix this? Is there a driver or a fix for this problem?

  Showes up like a yellow question mark in the Devces system as 'other '.   Cannot find a driver to install, both causes a loop continues when starting, new hardware found and cannot find a driver to install?

  Hello

  Download and install the drivers from the link below after selecting the operating system

  http://support.gateway.com/product/default.aspx?tab=1

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A60E 127 - updated hardware drivers

  Have a Satellite A60E-127 (Switzerland!) it works well, but after all the time since I started with (2004) I ask whether I need to UPDATE the drivers for the hardware?
  Who nows somethings in practice and can gave a few route to bring? I found asaid can't - as an example - in any update for my laptop TOSHIBA-pages!

  Thank you all

  Until the equipment works properly and you have no problems feature update of drivers is not necessary.
  It is important to update the operating system pre-installed (Microsoft Updates-ITMU) and preinstalled application antivirus.

  All that s.

• Satellite L500-1XL - new hardware upgrades

  Hi all
  I have the Toshiba Satellite L500-1XL and recently bought a new 500 GB internal HD and the upgrade went well. However, the internal transfer speeds aren't that fast. He is often out on 18mps level. Why? Affects of that? Use of the RAM, the use of the disk, the free storage space? The HD came with the laptop was 5400 with 8 MB, but my new is 7200 RPM with 16 MB with 11 seconds of access time. If that should not be much faster?

  Also, how can we get the support of USB 3.0? Only through new hardware? I know it goes into Windows 8 as this means there could be a few Windows 7 supports or who is still dependent on material?

  What are the most effective upgrade options to make my laptop run faster? He was modest. When I got it, but now use it for any need so get. Thus, upgrading to HD 160 GB to 500 GB (5400-7200), but it's unique processor with only 2 GB of RAM. I noticed on the Toshiba page so it says on a 64 bit system with 4 GB of RAM, the chart may use up to 1 800 MB of RAM upgrade RAM (not expensive) and then the processor? Even a single dual core would do the job? No need for a costly i3 and perhaps not compatible with the motherboard.

  Thank you!

  Hey Buddy,

  And what was your old HDD? HARD disk speed depends on different factors. You copy a large number of small files and a large single file?
  It s also useful to defragment the HARD drive from time to time. This can improve the speed. Also keep the system clean and use a registry cleaner like CCleaner that cleans up your registry.

  USB3.0 is a different interface. This new operating system wouldn t help you because it s material new feature/upgrade.

  Other improvements regarding: CPU and graphics card is not supported as you can read here:
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Your laptop has Intel GL40 chipset and the maximum RAM capacity is 4 GB. So you can install 2 GB DDR2-667 module in each memory location.

• Found New Hardware Wizard initiate at startup with no new hardware installed

  Hi Xircal,

  Thanks for your interest.

  The Malwarebytes we were a beta with a lot of precautions.

  I ran the Sophos base scan on C:.
  Nothing that you marked for deletion.
  Just hundreds of hidden files, mostly in the Recovery Console XP (minint), the RRBackups, the preboot\helps, the two Norton .dat files: cltLMS1.dat & cltLMS2.dat

  Description: Unknown hidden file
  Removable: Yes (but clean not recommended for this file)

  Norton said: «these files are components licenses of Norton.» Legitimate files of Norton. (They are not paid for spelling)

  I could run a scan in depth tonight if you think necessary.
  I have a bunch of drives on this computer, but c is the one who starts.
  In fact, I have a separate drive that I use to download software executables, drivers, etc..

  Peggy

  Hi Peggy,

  Does not sound like there is nothing to worry about here.

  The 'new hardware found' is still running at startup?

  Also, could you possibly get in touch with Norton and ask them if ROOT\LEGACY_BEEP\XX_NPF_XX in Device Manager has nothing to do with the Norton Personal Firewall? It could be something as simple as that.

  I think you're right. I don't see anything unusual but one long-standing issue date with Norton Security turned off randomly on startup (I does not start unless I'm free to control and turn it on if it is off)

  I contacted Norton on that months ago and they were not able to solve it, but strongly advised I have remove a bunch of utility programs that they don't like. Split us up on this suggestion. I have uninstall Super Anti-Spyware, and you know the rest of this story. But I think Secunia PSI, Winpatrol, AutoCAD, etc. as essential to my well-being computer.

  I think I'll let the dog Norton are.

  The 'new hardware found' has NOT yet run at startup. Thank you very much.

  Assume that you have done at least what I asked you to do. I'll miss our daily interactions, but you'd better take your white hat to someone who needs your expertise more than me.

  Peggy

• found new hardware wizard appears and unknown device device Watch Manager

  Since a few days ago, the Add New Hardware Wizard keeps popping up. I looked in Device Manager and found an unknown device (yellow exclamation mark) should I delete the device? I don't know what to do to identify which device is unknown.

  If you remove it, then he'll probably be back the next time that you start.

  go to start / all programs/windows update (at the top of the list of the menu), custom search, watch your optional hardware updates and search for a driver that you have not already installed, you can get lucky. Otherwise post the details of your specifications and ask again.

  Furthermore, it can take a while to get the pages updated and you may need to install active x on the way, a line will appear at the bottom of the fixed part of your browser screen (the same as when you download) If this is the case, click on it and install active x, then a box should appear and tell you allow I think.

• Found new hardware unknown wizard

  I have a Windows XP Media Center Edition computer. A few days ago, he jumped to the top of the box, "Welcome to the new hardware detected" whenever I turn on my computer. I don't know why and I think that he doesn't even know why, because he said, "this wizard helps you install software for: unknown." When I try to install the software automatically (recommended) it continues to show that it is looking for unknown. I have not plugged my hard drive backup from another computer, which usually makes it to do. I tried to do a restore of the system at the beginning of the week (today is 10/01/13) and it still does not work. Then I did a system restore to last Thursday and it still does not work. Why my computer do that?

  Hello

  Yes, now you must contact HP support.

  Thank you!

• Satellite A60 - recovery and install xp problem

  I have a laptop A60 which is slightly more than 1 year.

  A couple of days, about 2 minutes after the start, the screen flashed with a new window (I was unable to see the content, it's appeared and disappeared so fast), then the laptop turned off.

  I rebooted, could not boot into winxp I received the error message (please report this problem as a load dll required) missing file. The missing files were all of the system folder.

  I then tried the recovery dvd. Everything looked fine, however, he kept failing at windows startup.

  Whenever I start the machine now, I get the toshiba logo, which now has lines of Red pixels in the columns towards the bottom of the screen. The same effect occurs when I try to recover using the recovery dvd.

  After trying this for some time, I tried to install my own copy of XP home. The laptop starts, attempts to load the files needed for the installation of winxp, gets to the core of the dll and stops with an error 4 impossible to continue.

  The recovery cd and winxp cd are in good working condition - validated it on other machines.

  Once, the winxp set up did go to the options page so I chose the repair console. I was able to run fixmbr and fixboot. It worked, then I could use the recovery dvd and successfully recovered it. About 2 minutes later, once he had everything installed, I got a blue screen of death and had to re-boot - to see that I was back to the initial situation.

  I then used fdisk to set up new partitions. ]

  Now, if I try the recovery cd, the laptop starts to load the ghost file and then the screen turns white after a while - the same thing with trying to install a new copy of xp.
  I still get the red on the screen pixels when I try the recovery cd and when I start the machine and get the toshiba logo. However, when I try to install xp from my drive, the red lines, points, appear not at all.

  My feeling is that I had a master seed virus and need a new hard drive.

  Can someone please advise me on this... What do you think that is the problem? If you think it's a virus master seed aswell, can you please tell me what you know how I can fix this or I have to buy a new hard drive. What a RAM problem or a problem with the hard drive controller?

  For now, I am going through several thoughts, but keep coming back to the boot virus master = new hard drive!

  Any help would be greatly appreciated!

  Hi Paul,.

  In this case, my inclination is to suspect the RAM modules. This is based on the assumption that the screen initial 'splash' is not on the hard disk but is stored in the CMOS chip. The fact that your get the Red pixels when it appears would indicate a problem until the hard drive is still accessible.

  If you have restored your system using the recovery CD then the Master Boot Record will also have been restored (and is not infected).

  Of course, it is perfectly possible that your hard drive may also have problems that would explain the symptoms that you experience when you try to restore you system, but want to try simply to clean the dust from your CPU radiator (with a vacuum cleaner hose) before you try to restore again.

  The restore process causes a lot of heat to be generated, and you may well find that it is having a negative effect on your laptop.

  Kind regards