Satellite C50-A-157 Sandisk USB does not work in Recovery Media Centre

Similar Questions

• Satellite C50 - B - 14 d - USB ports not working not

  I have a C50 Satellite - B - 14 d and had again for about 4 months.

  I didn't know that at the time of the purchase (online) that there is no optical drive, so I bought an external.

  Trying to plug into it, discovered that nothing happened in the 2 ports on the right side (2.0 and 3.0) so I decided to try the left port 2.0.

  It does not detect the device, but it undetects then within 10 seconds, it continues to do this every few seconds it is impossible for me to access my work on CD!

  I contacted the people I bought it since then, but they say it's a matter of Toshiba?
  Can someone help to solve what I don't want to send it for repair because I can't be without him more than 2 days.

  HHHEEEEELLLLPPPPPPP!

  I put t he thinks that the s notebook issue if all the USB ports work in relation to other devices USB; That is to say the USB mouse.

  From my point of view of a few external USB CD/DVD drive could not be recognized because of the low power of the USB.

  Try to connect the CD/DVD drive to the laptop using the USB Y cable which allows to connect to two USB ports.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Re: Satellite C660 - One USB does not work

  Hello

  As the title says, I have a c660 that has only a working USB port. The other is dead and has been dead since day 1.

  I tried to uninstall the USB controllers, re-boot and allowing the automatic hardwarediscovery run and install again. This has not solved the problem unfortunately.

  I am running windows 7 by the way.

  Another had a similar problem or has any ideas?

  Thank you

  TFM

  If only a single USB port does not work and if the other is OK then I think it is a dysfunction of the USB port and not related to any software.

  So in this case, I think you should visit the ASP from Toshiba for a verification of the motherboard.
  The USB ports are part of the motherboard and possibly you need new mobo.

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite P105 carpet * a dvd player does not work with Win 7

  Greetings,

  I need an upgrade on my dvd to my vintage Satellite P105.
  I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

  (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

  The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

  (2) so my question for multimedia specialists is: what should be my next move?

  (3) should I go outside and confront the neck of the bottle USB or

  (4) to make the speed of the bus on the internal dvd?

  (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

  (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

  Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

  Thank you in advance.

  Rachel_1

  > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

  You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
  But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

  (> 2) so, my question for multimedia specialists is: what should be my next move?
  As mentioned. Good option would be to buy an external burner drive ODD

  (> 3) should I go outside and confront the neck of the bottle USB or
  External device are compatible with all computers and are less expensive

  (> 4) go to the speed of the bus on the internal dvd?
  If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

  (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
  As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

  (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
  Point 5 of the air)

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite Pro R50 - brightness control F3 does not work

  Hello

  I have a R50 Pro Satellite - bought just 1 month ago.

  Suddenly the order of function F3 to control light intensity has stopped working.

  The brightness can down with F2 function but F3 does not work

  F3 in the software and the operating system back to research, but do not work by pulling the brightness setting.

  So I'm stuck with my brightness down as low as it goes.

  I downloaded the latest driver for the feature key and installed, so it isn't that.

  Anyone got any help they can give?

  See you soon
  Craig

  As a temporary solution, you can change the brightness in the power settings.
  I really don't understand what the problem may be, but try to reinstall the utility system then Toshiba and Toshiba driver to feature key.

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite A-L50-19N - audio DTS does not work after update of Windows 10

  It is the most important thing in the drivers of toshiba, because without this driver, the sound is terrible...

  And now after the upgrade to 1511 he doesn't...

  I reinstalled IDT AUDIO latest driver is for 8.1 (2015 jan) and DTS Audio, which is for WIndows 10, but it does not work, I can it enable / disable EQs change, but nothing will change...
  
  WINDOWS 10 (1511)
  TOSHIBA SATELLITE L-50-A-19N

  DTS: 6.10.6491.0
  IDT: 1.2.41.0
  

  I fixed that, I updated its IDT Manager devices, and now Audio DTS driver works...

• Satellite A500 and Win8 - DVD player does not work

  I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

  Anyone know how I can get it working again.
  Thank you.
  Cumbria

  Solution here:
  http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

  * Uninstall Toshiba programs: *.
  • TOSHIBA Recovery Media Creator
  • TOSHIBA Disc Creator
  Then restart your PC using the power--> reboot option in Windows 8.
  Your CD/DVD should be available now.
  To help uninstall these programs, follow the instructions below

  * To uninstall a program or application: *.
  1. on the home screen, type Control Panel
  2. select Programs--> uninstall a program
  3. find two programs listed above and uninstall these applications
  4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
  5. when the power to the computer on the CD/DVD drive should be available
  If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

  * To uninstall a device driver: *.
  1. on the home screen, type Device Manager
  2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
  3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
  4. the CD/DVD drive should now be shown.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107