Satellite C660 - 115 WLan connection only works when the power cable is connected

Similar Questions

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Satellite C660-115 - error message "Gfxui works not" at startup

  I got a Toshiba Satellite C660-115 Windows 7 and at startup I get the message ' gfxui works not ", can I ignore what my laptop seems to work ok.

  It is a problem with the GUI GUI Intel.
  You need to reinstall the Intel graphics driver.

  Visit the page of the Toshiba UE driver and download and save the correct Intel driver

• NB200 abandoned wireless connection when the power cable is plugged

  ALL ideas welcome, my notebook NB200 drops Wi - Fi when it's attached power alternative, on another forum, someone suggested I could change the power settings to avoid this problem, but not how, all ideas welcome, thanks
  kazz45

  > I found the power options, but all that it gives me a choice of power management, which is energy-saving Toshiba which corresponds to the current setting, I see nothing wireless on the tabs it?

  You must discover the power plan that is used when the power adapter is attached.
  Then, you click on change the power plan settings

  New window would be open where you will find an extra option called change advanced power settings

  Now you will see further options. Scroll down the settings of the wireless adapter and make sure both options are set on the performance

• Satellite C660-121 - WLAN does not work

  Hi all

  I have problem with Toshiba Satellite C660 - 121.

  I installed new windows, and now my wireless does not work. I downloaded all the drivers LAN, WLAN etc. and WLAN will not work, I put the internet cable in the laptop, but not by cable or WIFI internet connection: S

  Please can someone help?

  Edit: in the Device Manager, NETWORK CONTROLLER is not installed, but I can't find that anywhere and I can't find any Wi - Fi network!

  Which Windows version have you installed on your laptop satellite?

  At first check if the WLAN and LAN card card are installed and registered correctly in the Device Manager?
  If Yes, you must enable WLAN card by using the FN + F8 key combination. Can you do this?

• By Satellite C660-174: WLan connection drops after 5 min

  Hello

  I recently bought a toshiba laptop (satellite c660-174) and am having problems with my wireless internet connection.
  (I currently use the Airport Express Terminal and my macbook has no problem whatsoever)

  The problem is that my internet connects for a few minutes at a time, then falls back, I was invited to run the network diagnostics which solves the 'problem' it will work again for a few minutes then the same thing happens... etc etc.

  I am 100% sure the router and the connection is ok, because I've been running the macbook at the same time and who never fails or loses its internet signal.

  any suggestions would be greatly appreciated

  see you soon

  Check it!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59932

• Satellite C660-1NW - Webcam does not work with the facebook chat

  Hello

  My doughter recently bought a Satellite C660-1NW youcef.
  This laptop has a webcam on board.
  When you use Facebook, webcam chat, webcam does not work.
  The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
  Audio works.

  Skype using the webcam works.

  I have updated the drivers but when same no go :(

  Please help move facebook webcam

  Greetings,
  PP

  Hello
  If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.

  Your Adobe Flash Player settings will be displayed.
  On the tab, make sure you only select the right type of camera you use with your computer.

  On the tab, you may also need to 'allow' Facebook to access your camera and microphone.

  If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

• Satellite C875-100 - WLan does not work after the victory 8 upgrade - no driver

  I bought a toshiba satellite c875-100 yesterday and I did the upgrade of windows 8.
  Before the upgrade of the network wireless connector worked well, after the upgrade, he doesn't.

  Device Manager showed that my network connector driver was not installed.
  I tried all the drivers of toshiba online for this specific model with the name 'Wireless' in it and later on al the drivers for this particular model, but every time I get the message that the Device Manager cannot find the appropriate driver.

  Adesperate attempt I have just tried to choose a driver from the list of windows itself (I choose the realtek PCI wireless network card) but who gave a sudden stop of the system.

  Anyone have a suggestion how to get my network controller to work?
  If not, is it possible to revert to the version of windows 7, which was already installed?

  Thanks in advance!

  Hi mate

  As I m wrong not the laptop does support RTL8723AE Realtek Wlan card.
  You need the driver that would exactly support the RTL8723AE WLan chip

• Files OAM scrolling effects only work when the scroll up

  Then I finished my first site Web which is going amazing and I'm all finished with it now.  I've been brining edge animations animate in muse as. OAM files and most of them worked great so far.  I'm trying to get these animations to start at only one point in the manuscript, and from what I understand that should occur when you use the functionality of scrolling effects and using the t-handle and place it where I want the animation to start.  So I did this multiple ways with AutoPlay or each 20px and nothing seems to work.  Never the animation begins when the scroll up and scroll hits the t line, but never when scrolling to the bottom and it makes me crazy, please tell me that someone has a solution to his own.

  Thank you

  Try this! This is a tutorial Adobe Edge host integration in muse... Scroll effects: Animation | Adobe Muse CC tutorials

  Hope this helps!

  -Levi

• SWF, HTML files only work when the absolute path is entered, not on the index page

  I have a strange problem: when I type the absolute URL to my SWF file, it works fine.

  However, only the background image is displayed when the SWF file is embedded in the

  "" "" home page. "" " Does anyone have an idea why this would be the case?

  The images are loaded dynamically?  Given that the swf file is not in the same folder that the homepage, the SWF is perhaps mistargeting them.  When you load a swf in an html page, this page will become the base for any relative targeting.  So if the swf file can load the images in its own folder, you should have to move the images in the folder of the home page, or change the relative for them in the swf file path as if the swf file is in the folder of the html page.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Overview of the output only works when the preview dialog box is open?

  The preview of the output adjustment certainly between into force, but only when the output preview dialog box is open, while precisely the preview of the images in playback mode is not possible; It is only possible to preview by clicking on an image and open the dialog of OP. As soon as the OP dialog box is closed, the image reverts to its prior Preview State. This is not normal!

  That's how it has always been. Keep in mind, this is a modeless dialog box, it prevents you to navigate through the file.

  What do you mean by "reading mode" specifically and why you can not use?

• Satellite C660 powers, black screen and switches off the power

  Hello world.

  I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

  Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

  I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

  A big thank you in advance, Neil.

  In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
  Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

  Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

  Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.