Satellite C660-1tim: - cannot enter the BIOS due to the fast start feature

Similar Questions

• Satellite C660 - continues to enter the system repair

  Can someone help me?

  I have a Toshiba Satellite C660. Yesterday, it crashed. When it restarted, it went in the repair of the system and whenever I rebooted, it entered the system repair. Don't know if it is relivant but I get a windown come with drvload.exe back.

  So I did a factory restore hdd thinking this would clearly be the problem, but it didn't. Now I always get a repair system each time I do updates of mircosoft when I restart, more I can't hardly open programs like firefox, add and remove programs.

  I now use a check of HDD to see if I have bad sectors, have also scan mcfee which showed no virus.

  Any suggestions would be grateful because do not know what to try next.

  Thank you very much

  Hello

  > So I did a factory restore hdd thinking this would clearly be the problem, but it didn't.
  That would mean he s no malfunction of the software and the problem seems to be hardware related. HARD drive recovery can restore the original settings of the software box and they are pre-tested by Toshiba. So, theoretically, he could be sector failed HARD drive, RAM failure or something else

  > Now, I always get a repair system each time I do updates of mircosoft
  This would mean that the problem appears only after Windows update or I understand something wrong?

• Satellite C660-155 - cannot use the FN keys

  I have a Toshiba satellite c660-155 PSCOQE, I just reinstall windows 7 on a generic drive and I lost the feature of function keys (fn) (I can no longer hold the fn key and press a button to change the brightness ect) I need to install to get it?

  You must install the Support TOSHIBA Flash Cards and then Toshiba value added package utility.

  By the way: If you want to use clean OS installation you need to install many other drivers, tools and utilities that must be installed on the right the order of installation.
  If you need help with it let us know.

• Satellite C660-15 cannot install the update of wireless lan

  I receive a notice indicating that my wireless lan driver should be updated. I followed the instructions and know which unit my laptop (Realtek: RTL8188CE) and download the appropriate driver software. It appears as a zip file in my downloads folder. I unzip and then what?

  Read the instructions Dutch (although I prefer English on notice that download and update the driver) it is said to look for a readme file (they are all very old, since 2010, none in 2011). Really they don't say anything about what to do. In Dutch, he also says to click on SETUP. I find one that is marked as an application, so I double click that.

  It runs, and then on the screen it says something like: "the software may or may not have installed correctly". So I click on it to install it again. Same thing.

  I had no idea if it installed correctly or not, so I clicked on the features of network/system/control panel (?) / Realtek... and right-click to see which version of the device driver is there and it has not changed.

  So, what should I do to get this new driver works correctly?

  I tried several times and it doesn't work right. It becomes very frustrating and there seems to be no way to contact Toshiba support, other than through this forum (which is users rather than support from Toshiba, I think).

  Help, please.

  cjbbrussels

  Try to install the driver using the old-school method.

  Enter the card WLAN (Device Manager) properties > driver > Update driver and browse to the RTL_Driver folder. Choose the folder 7 x 64 or 7 x 78, according to the version of the OS you are using.

  I think that it will install the driver.

  By the way: If your WLAN is working properly you should not install this driver.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• Satellite C660 - Missing WiFi after the fresh install of Win 7

  Hey dear community,

  Ive had the following problem.

  I got Windows 8 on my laptop a few days then noticed that it's the biggest disappointment of the Millennium, and I did not have my original CD Windows 7 more so I downloaded the ISO of [here | http://www.chip.de/downloads/Windows-7-Home-Premium-64-Bit_46355794.html] and formatted with ISO.

  Then I realized that theres no card on the laptop more.

  Then all Lan and wireless Lan indicator found on the Toshiba page for my laptop has me only the connection to the local network.

  Conclusion: The LAN connection that I have now collapsed.
  A Wi - Fi connection is not displayed with the adapters in Device Manager.
  In Device Manager there is a network controller (if this is right), but the laptop can not find a driver in the driver update and it is not active.

  I hope you can help me, I'll be back without problems via WiFi to Internet.

  SRY for my bad English Im student have in grade 10: smileyvery-happy:

  Greeting
  TazzyTV

  Edit: Have a Toshiba Satellite C660 - 2nk PSC1QE

  The Satellite C660 - 2nk PSC1QE-04H002GR was equipped with Atheros AR9285 Wlan / BT combo card.
  To get (both WLan and BT devices) working this machine, you must install the driver Atheros Wlan, filter for driver Atheros BT package and Toshiba BT stack

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• C50-A-180 satellite how do I enter the BIOS Setup?

  Hi guys,.

  I have no idea how I can get into the Setup of BIOS of Satellite C50-A-180.
  I've tried some of the F1, F2, ESC, but I can't make it work. Maybe I do something wrong, too.

  I want to delet Win 8 and install Win 7, I need the bootorder for this purpose.

  I hope any of you have a clear description how enter the BIOS of this model.

  Hello

  Before you anything please create recovery media (DVD or USB drive). After the new operating system installed, you will not be able to install the original image of the HARD drive recovery. Don t forget it is very important.

  So, after you do this proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Recommencer start laptop, then press F12 to get into the boot menu. There you can choose the first boot device.

  One last thing. Before you begin with Win7 installation check if your laptop is supported and Toshiba offers all the drivers, tools and utilities.

• Satellite C660-125 - cannot access BIOS after upgrade to Windows 10

  Hello, I just upgraded to 10 Windows Home of Windows 7 and now HWSETUP. EXE is not running and when restart the laptop I can't enter the BIOS with F2 or F12. Can someone companion please? Kind regards

  You must install the driver from Toshiba for Windows 10 system.
  However the C660 does not seem to be in the supported list, you may need to go into BIOS instead.

  Hold SHIFT key during shutdown to shut down Windows hybrid suspension mode. Keep now SHIFT until the power goes out.
  The BIOS F2 message appears only if the laptop is a cold start.

• Satellite C660-1TK - update of the BIOS fool you

  I have the Satellite C660-1TK (PSC1QE-01900GGE) new to Sunday that I flashed with the version 1.40 with no problems
  NOW I see that I have the new version 1.50
  Startting the .exe BIOS flashing
  BIOS flashed done but the conduct of the s is not complete
  After s programming made Lap top gel with loud noise from the fan...
  I hospitales to remove the battary and now

  the buios version is 1.50, but THIS version 1.40 always the old becose the flashing does not complete with root... now I try reflashed but show me s you with the latest and the version of the bios >!

  Post edited by: fensms

  Post edited by: fensms

  To be honest, you can be happy that your laptop works because many people have had bad luck after the BIOS update fail.

  In my opinion, you shouldn't be playing with BIOS updates. At the end you may damage the BIOS update and your laptop won't boot at all. Maybe you should contact Toshiba service provider and clarify this point. Ask for help. They should do it for you. If something goes wrong, it is not your fault.

  Be careful with this. This is just my opinion and advice for you. Don t change well running system.

• Satellite C660 - lag keyboard and the update of the BIOS does not install

  Hi all

  Having the Satellite C660 with keyboard lag problem has tried to update the Bios, but after downloading the Bios from the site web of Toshiba and running that a message says already installed Bios is a newer version and install it with now cancel.

  Can anyone help?

  Pilot

  Can you please tell us what model C660 you exactly (C660-xxx) and what version of BIOS?
  Please check in the BIOS settings.

• Satellite C660 Wireless stopped since the update of the BIOS 1.4

  In fact, there is a thread on this same topic closed. But I would like to add something.

  My Satellite C660 is dual-boot. I have Ubuntu installed as well as Windows 7. Now, at the moment that I stupidly updated the bios to 1.4 the wireless doesn't work under windows. But he continued to work under Ubuntu.

  So, I know that the material has not broken suddenly. It is clearly a serious error in the bios update provided by Toshiba and must be fixed immediately.

  One kind may explain how to restore the previous bios. I know it was recorded somewhere because I saw what happens during the update process.

  See you soon!

  > Now, at the moment that I stupidly updated the bios to 1.4 the wireless doesn't work under windows. But he continued to work under Ubuntu.

  Have you checked if the WiFi is enabled in Windows 7?
  Usually you must activate the Wlan using Fn + F8 keys.

  Check it!

• Computer will not conduct the office and cannot enter the Bios.

  Original title: cannot get into the BIOS

  When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

  Hi Ivor,

  1. you receive messages or error codes when you try to start in normal mode?

  2. did you of recent changes on the system?

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

  You can view the following items to start in safe mode.

  Startup options (including safe mode)

  Start your computer in safe mode

  Hope this information is useful.

• Satellite 1400-103: cannot access the BIOS Setup

  I have problems to enter the BIOS setup. At the start screen 1, I press ESC, and then check the system appears. Then press the F1 key. Once on the button, it takes me to the BIOS Setup and reboot the laptop. Any help will be much appreciated.

  James

  The laptop starts properly? I want to say is possible to get into the Windows operating system?