Satellite C660D-178 file system fail to SSD using Linux

Similar Questions

• Satellite C660D-153 - after system recovery bootmgr is missing

  I did a complete system restore on my satellite c660d-153 and he says now that the bootmgr is missing at startup. My laptop did not come with a boot disk, so I'm not sure on what to do. Help, please!

  All you can do right now is to try to do it once more.
  For more information, see http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

• Satellite C660D-178: ethernet on a usb Linux support does not work

  Hello

  I found that none of the two usb ports can handle ethernet via the usb port. This is a usual Linux feature - when you connect two computers with a usb cable, it can function as a network interface.
  Surprisingly, C660D-178 appears to be the very first machine, with that I found that it doesn't work.

  Why?

  No chance to activate?

  Thank you
  D.

  Hello

  USB never tested and used by Ethernet but there is a tool called USB Over Ethernet
  It s 15 days trial version and compatible with Windows 2000/XP/2003/Vista/2008/7

  You can try to test this using a version of Windows in this case you can know if it s linux question or maybe this feature is not supported by the hardware

• How can I migrate content from file system to webcenter content using inbound refinery?

  Hello

  How can I move content 'Webcenter content' using Refinery Inboundfile system? There is a lot of content in my system, I want to go to "Content Server" using inbound refinery.

  How can I reach it? Is it possible to do this? If this is not possible using inbound refinery, so how can I do this?

  I use 11.1.1.6 version.

  Help, please.

  Concerning

  REDA

  Hi reda,.

  First - incoming refinery isn't real resources whose content is ingested in the content server. 'S done it by Webcenter Content server that holds / process of all content items.

  IBR is only used for the conversion of 1 format to PDF documents (and some others).

  So, in your case, you must first set up a content server and then install Desktop Integration Suite customer on your physical machine. In this place, you can drag-and - drop all the content of the file system to the content server.

  Links to this documentation are available from the following links:

  Content of the WC: http://docs.oracle.com/cd/E28280_01/doc.1111/e26692/toc.htm

  Desktop Integration Suite: http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/toc.htm

  Please go through the documentation first to get those basic concepts allowed.

  Thank you

  Srinath

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• Satellite C660D-178 - Linux does not recognize the Bluetooth

  Hello!

  I just bought this laptop big. I do step by step installation of my linux machine :-).
  The wifi worked well, but the system does not see the bluetooth device.

  If I understand correctly, the bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  Help, please.
  Here is the output:

  # lspci
  00:00.0 Host bridge: Advanced Micro Devices [AMD] device 1510
  00:01.0 VGA compatible controller: ATI Technologies Inc device 9802
  00:05.0 PCI bridge: Advanced Micro Devices [AMD] device 1513
  00:06.0 PCI bridge: Advanced Micro Devices [AMD] device 1514
  SATA 00:11.0 controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40)
  00:12.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:12.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:13.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:13.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:14.0 SMBus: ATI Technologies Inc. SBx00 SMBus Controller (rev 42)
  Audio device 00:14.2: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
  00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host (rev 40) controller
  00:14.4 PCI bridge: ATI Technologies Inc. SBx00 PCI to PCI Bridge (rev 40)
  00:18.0 Host bridge: Advanced Micro Devices [AMD] device 1700 (rev 43)
  00:18.1 Host bridge: Advanced Micro Devices [AMD] device 1701
  00:18.2 Host bridge: Advanced Micro Devices [AMD] device 1702
  00:18.3 Host bridge: Advanced Micro Devices [AMD] device 1703
  00:18.4 Host bridge: Advanced Micro Devices [AMD] device 1704
  00:18.5 Host bridge: Advanced Micro Devices [AMD] device 1718
  00:18.6 Host bridge: Advanced Micro Devices [AMD] device 1716
  00:18.7 Host bridge: Advanced Micro Devices [AMD] device 1719
  01: 00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8102E/RTL8101E PCI Express Fast Ethernet controller (rev 05)
  02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 002 Device 002: ID 04f2:b1d6 Chicony Electronics Co., Ltd.
  Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.

  > If I understand correctly, the Bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  You are right, that the BT is integrated with the smart WiFi ATHEROS WB195-HMC
  I have not much experience of Linux but BT and WiFi must be activated by FN + F8 (using Windows)
  Eventually, you need to enable this as well on Linux

• Satellite U940 - 11 d - 32 GB mSATA SSD use

  Hello world

  I bought the week last Toshiba U940 - 11 d and I would replace the drive HARD 750 GB with 120 GB SSD. I have a question. I would like to install Windows 8 in SSD 120 GB drive and use another DDD which is mSATA for swap or my documents. Is this possible?

  What can I do for my application? Can I use 32 GB mSATA as normal SSD SSD or I can use only to the cache?

  Best regards.

  > I have a question. I would like to install Windows 8 in SSD 120 GB drive and use another DDD which is mSATA for swap or my documents. Is this possible?

  It would be possible if the system of Windows 8 would recognize the mSATA 32 GB as an additional drive. I m not 100% sure of this, but I guess only in case this is not possible, you could use this drive for caching mSATA SSD.

• Satellite L300 - graphics make it fail if I use the webcam

  Sex cam of my 15 months, Satellite L300 (OS = Vista) used to work, but now it does not work. And I also have the message "graph make fail."

  What it means?

  Hello

  I put also know what means this error message. I never noticed this problem with my webcam, it always worked correctly.

  Have you tried reinstalling the driver for the webcam? If this isn't the case, please try it. You can find the latest version on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before reinstalling the new version please remove the old one first and reboot the laptop. Then, install the latest version.

  Welcome them

• Lightroom Catalog and preview files on the external SSD using Thunderbolt?

  I own an iMac 21 with a regular construction in the hard drive. The RAW files, back ups are on external hard drives.

  It would make sense (speed wise) to put my catalog on an external SSD connected via thunderbolt?

  My catalog is about 1, 7 GB of big, with glimpses lightroom now use about 40 GB.

  I think to an SSD 128 GB dedicated to lightroom.

  Would it be a good idea? Or simply be money down the drain?

  Any comments would be welcome.

  Read and write in the catalog will be faster than things like scroll thumbnails and switching modules. Glimpses of the building, etc. see very little improvement. This test should give you an idea where things will be better http://www.computer-darkroom.com/blog/will-an-ssd-improve-adobe-lightroom-performance/

• Satellite L755 - 1 CD: Realtek card wireless off using LINUX

  Hi all
  I have a Toshiba L755 - 1 CD Windows 7, with a Dual Boot Linux. Since yesterday, without explanation, my card (Realtek RTL8188CE) WiFi is disabled at startup.

  When I boot on windows, it is shown as enabled (in the network adapters Control Panel), but I can't find any wireless network. I have to turn it on and turn it on (Fn + F8 using twice as much) so it can walk.
  Problem: Fn keys is not supported under linux, and as long as computer SCIENCE student, I have to be able to use my linux for my work.

  I tried a full re-installation using my recovery DVDs and does not install Linux, but I still have the same question. So I think the problem might be in the BIOS.
  I don't see any option in the BIOS or the HWSetup tool that could solve my problem.
  I noticed that even after you restart the map using Fn + F8, the laptop wireless LED stays off completely.

  I've got 3.50 version of BIOS, version of the realtek 1005.12.105.2011 driver.

  If you see what is the problem, I would be VERY happy that a bit really urgent...

  Thank you!

  Nicolas

  The question is strange and I don't understand why all this happens.
  I have two Toshiba laptops and I didn t notice such problem, especially if the laptop wakes fashion "Eve".

  Have you tried to update the BIOS to the latest version?

• How to format the RAW file system in my pen-drive?

  Dear friends,

  I have a 2 GB key USB "GENX". I used it for about six months without any problem. But now I have a serious problem that has changed its system of RAW files accidentally. I didn't really know what the reason for that! He didn't connect with any dangerous computer.

  Its file system is FAT 32. It contains a few songs, some software, photos, videos etc, but they are not important. So I don't want to put data files.

  My question is: at y - it software or sort {command type us in the command e.t.c. prompt} to format my USB? I don't want to give anything, I just empty it transform the FAT32 or NTFS file system.

  I use Windows X P-SP3. For 2 months, I searched the entire internet to solve my problem, but no use. I tried many software! They are not useful for me, because they help just to recover the files that it contains.

  When I connect my pen-drive, an error message appears "the disk in drive G is not formatted. You want to format it now? "When I click on YES an other error message is displayed-"Windows failed in the full format.

  If someone help me which can give pleasure to thousands of people. Because when I looked / was asked about this issue, I realized that many suffer from it.

  Dear friends please help...

  BY Abin cherish.

  Dear friends...

  Its with great pride and joy to inform you that I formatted my pen-drive successfully. After almost one and work hard for semesters. I tried several software but they all failed.

  I ask you all to try transcend recovery tool online to achieve this. (link:- http://www.transcendusa.com/Products/ORTCount.asp?URL=Software/OnLineRecovery.exe&action=Download ).

  Its a small tool. He RAW file system format, even if our pen-diving is not made by Transcend. Even if the format successfully completed, we are not able to use the device because it shows that it is write protected. So can you please do the following:

  1) click Start-> Run.

  (2) type regedit and press to enter.

  4) click the plus sign next to HKEY_LOCAL_MACHINE

  5) click the plus sign next to SYSTEM

  6) click the plus sign next to CurrentControlSet

  7) click the plus sign next to control

  8) click the plus sign next to StorageDevicePolicies

  (9) write click on WriteProtect and click on modify.

  (10) if the value is 1 change 0, and then click ok.

  (11) the registry editor close and restart the computer.

  Now, you're done. Your pen-drive is now ready.

  But one of the problems is that we do not have the same space as before. In my case my previous device of ability was 1.87 GB. But after I fixed, reduced ability to 1.67 GB. I'm not worried about it because I think I'm the only one to format this type file system.

  Thank you friends...

• Get error when trying to backup on USB: the willing backup of a file system drive corrupted. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)

  Original title: what is the disk error checking tool

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears "the backup target K:\ device failed with the following error:"

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)"
  SOMEONE PLEASE HELP!

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears " the backup device target K:\ failed with the following error: "

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0x81000008)"

  SOMEONE PLEASE HELP!

  Hello

  This error can occur if there are problems of system files on the drive selected for the backup file location. Have you tried to save the backup to a drive or another location? Please try the following to fix the disc
  [1] method: Using Check Disk to find the files corrupt
  • In the start menu, look for invites
  • Right click on command prompt and select run as administrator
  • When the application starts, insert the following text and press ENTER: Chkdsk.exe/f/x k:
    Where we mean K:  the disc damaged.

  NOTICE: Check disk is maybe not able to lock the drive and launch the operation if the disk contains files required for Windows to run correctly. It asks if you want to schedule a check disk at the next startup upwards instead.
  Thank you
  Have a nice day :)

• Can I transfer files from computer XP with FAT 32 file system to computer XP with NTFS file system?

  I'm trying to transfer files from one computer to the other, both with XP.  Former is set up with the file system FAT 32. new using NTFS.  When I copy the files on thumb drive FAT 32 to and try and transfer to computer NTFS, files transfer, but nothing in them.  This does mean that I can't make such a transfer, or is there something I am doing wrong.  THX.

  Y at - it files of 4 GB or more large size?  It's the only thing I can think of that could cause a problem, but I only expect to see only when copying from NTFS to FAT32.

  When the files disappear?  They are on the Flash DRIVE?

  How did you copy the file to the USB of the first computer?  How do copy you them from the USB drive to the second computer?

  Go to Control Panel > Folder Options > view and configure it to display the hidden files and folders.  Does that help: owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• The backup disk has a corrupted file system (0 x 81000008)

  My computer has been implemented full backups per week on an external hard drive.  This week the back-up was not entirely successful.  When you click to view the details, I get the following error message - "backup has a corrupted file system.  "Fix it using the disk error checking tool or change backup settings to a different location.  I then click to start the disk check.  While the scan starts he gets only through files about 14000 and the dialog progress bar disappears completely, then the analysis stops.  I'm not sure a to how to solve the problem without deleting backups since I can't run the error-checking tool.  I know that I can reformat my drive external hard (according to the manufacturer's directions), but I'm not ready to lose all that data.

  Hi PAmom24kids,

  This is an external USB- drive that you use?

  First of all, you can check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Select also automatically fix file system errors

  Let us know if it works,

  Kind regards.

• ESX 3.5 file system?

  Hi... earlier this week, I had a RAID failure, and my whole military machine went down.  I currently work with a data recovery facility to get my VMDK off the disks.  I'm not a VMWare expert, and the recovery people have asked me what kind of ESX 3.5 file system used.  They mentioned XFS... is this correct, or is this something else?  Thanks for your help!

  Right hope, trying to recover the data store that has the vmdk? /

  the data store are VMFS3 format and the BONES of ESX hypervisor type use the ext3 file system as the hypervisor is linux OS.