Satellite C70D-B - 30 d: how to access back after ~ 16 removed screws

Similar Questions

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite C70D - A - 11 d function key turn off after use

  Hi all

  I have a Satellite C70D-A - 11 d... When I use once key FN to do a print screen or use the Zoom screen on the space key...

  I am not able to use the 1 to 4 Keynumbers or space to enter a space between two words... it always changes between the larger screen solution or the normal solution...

  I can only change the FN key after changing the settings in the settings of display and after a reboot...
  So I can't use FN without a reset with the F1 to the use of the F12 key and a reboot...

  Normally the FN key works only if it is pressed... If this is the normal operation of the keys 1 to 4 or F1 to F12 will work if configured in the settings, or not?

  What should do?

  Kind regards
  Jürgen

  First of all, you can change between the special function key mode (without pressing the FN key) or normal (standard) mode (Fn hold first of all use the standard functions of F1 - F12).

  This function can be changed in the BIOS.
  In BIOS go to Advanced-> system configuration

  Check this option.

• How to access files on a removable device that I have connected successfully?

  I am running a vm Centos57 VM Workstation 8 under Windows 7 Ultimate on a box of Alienware.

  After the virtual machine starts, I'm going to VM > Removable Devices and connect my Western Digital external hard drive.

  I know that the connection is successful, because if I go to/dev/disk/by-name, I can see the name of the removable device.

  So far so good.

  How to access files on the drive?

  Sorry to be so stupid, but I'm a newbie, so please inform promptly.  Or, if you're local to Nashville, call me at the 615-613-2123.

  Thank you muchly

  David Halitsky'

  cell 615-613-2123

  [email protected]

  package fuse-ntfs - 3g seems to be missing in your Centos
  read
  http://www.CentOS.org/modules/newbb/viewtopic.php?TOPIC_ID=24079&Forum=37

• How to access files after computer crash exsisting cloud creatives?

  I got a trial 30 for InDesign. My computer crashed and now I'm not able to locate the files on creative cloud.

  Hi mary % 20leec99

  You can Browse, sync and manage the assets of the Adobe Creative Cloud using this link and let us know if you need more assistance.

  Move this discussion to file hosting, synchronization and Collaboration

• How to get back after piercing down on a chart

  Hi, I'm on 4.2.4 and using integrated Anychart mapping tool.

  Explore works very well. I would like to add an icon that allows the user to the top level by clicking. Any ideas on how to implement this?

  Thank you

  Tim

  With the help of a button, you can do the following:

  Create your button on the page, in the Action when clicked, action button, select redirection to url.  In the target URL, enter this: javascript:history.back ().

  Save and you will now have a button on your chart region to redirect the user back to the calling page in your application.

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• lost product key and can not access computer - after the removal of virus; Then restart laptop that has requested that the product key

  I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

  I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

  Probably what you see is a fake windows alert activation. Please read the article on the link below to see if it applies to you.

  http://www.bleepingcomputer.com/virus-removal/remove-fake-Windows-activation

• How to bring back after restoring Vista SP1 SP2 operating system &?

  I recently used the media supplied with my laptop to restore/reinstall the OS I have a feeling that I don't have it quite right... but my computer works fine. Better than he has for a while. Unfortunately, it's living in the past.

  I had Vista Home Premium SP2 race and now I have only blocks of service of the House of Premium.No. I tried to install SP1 via Windows Update.It takes about 20 seconds. Update history said he "succeeded" but when I look in "Installed updates" is not there. Since then I have "successfully" updated for SP1 20 + times and the only one available for me now (available on several occasions) updated is SP1. My last installed update was September 21. Although windows update history shows "successful" updated all the way up to 15 October.

  In the meantime I had went to the MS downloads site and found the stand-alone (936330 KB) version 5. I tried to install that and it seemed to work. For about 50 minutes. or so he worked there and then it is simply disappeared. Gone.No error message, nothing. I tried again and this time, it still seemed to work, but it has taken longer to disappear this time. After several other attempts, I gave up.

  Since then, I tried a fix to this. Unfortunately, as evidenced by this post, I had no luck. I hope that someone out there has thought about it. I'm reasonably computer literate. More technical it more it receives, but I learn constantly.

  I use a Dell Inspiron 1720, Vista Home Premium, Version 6.0.6000, 32-bit, x 86, circa 2008. Intel Core 2 Duo CPU T5750 @ 2.00 GHz 2000 mhz carrots 2, 2 logical processors.  2 hard drives @ 320 GB ea. BIOS A09, 11/07/2008. Ver.2.4 SMBIOS.

  I'm currently downloading a set of files to install vista home premium 32 bit x 86 with SP1. I hope that it will work. My other alternative is this Dell factory image restore point but I think it'd probably just in the same situation? Help.

  Hello

  I don't know why you have problems with standalones.

  This is the advice that we give the posters who have problems with Service Packs:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• How to get back after changing to 2 cpu 1 CPU 1 processor

  I changed the number of processors on this prompt Windows (Windows 2003 SP2) 1 to 2 using the console.

  Now, I would go back to 1 cpu.

  In so far, I have stop the Windows prompt and changed back the console, its cpu from 2 to 1.

  Then restarted the Windows prompt.  However, when I go into computer management and devices and computers, it still appears as multiprocessor.

  Should what additional steps I take?

  Thank you

  To return to a single processor inside of windows, you must update the HAL.  So in Device Manager (which looks like that you know where it is) right click on multiprocessor and "update driver".  Choose any options that tell them to select the right driver manually.  Select ACPI uniprocessor and complete the update of the driver.  It prompts you to restart, and once you do that it takes only one pure CPU VM.  Of course when you do any kind of changes such as a virtual machine, you can take a snapshot of it in a working state before in case something happen which make dead.  Should not run into any problems with this, it several times.

  • Kyle

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• How to install Ubuntu Linux on Satellite C70D-A-111

  How to install Ubuntu on a Satellite C70D-A-111

  Hello

  This video helps you out?

  https://www.YouTube.com/watch?v=18F3CZveMwg

  BR

  Tom

• How to access the BIOS on Satellite C series

  Hello everyone:
  We try to download the Version of the OS on the Satellite C (for W7 W8).
  How can access us the BIOS?
  We are an impulse the F3 key during the loading process, but it does not work.
  Thank you very much

  Hi Rodrigal, a I hold the F12 key while turning. Then enter the password (if have one), while still maintaining F12 and press NumLock (if enabled), if numbers in password. Then options BIOS developed. It's a little tricky, but F3 does not work for the one I have. All the best, Tim

• How to access the BIOS on Satellite Pro A120

  Sorry for my English.
  But I need help:

  How to access the BIOS on my Satellite Pro A120

  Hello

  If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

• How to access the Satellite Pro 6100 wireless network card?

  I'm cleaning a Satellite Pro 6100 for a customer and noticed that it has built in wireless card (something they didn't know). However, I just can't work out how to access. I pushed the little switch on the side backwardsa and I rocked forward, Fn + F8 and everything else I can think. But nothing happens.

  I even found the Switch Device Network utility, but that is only to show the LAN card.

  Any ideas?

  First of all please check if Device Manager in the laptop has an integrated WiFi card. The switch WLan available on the website of the laptop does not. Laptops are delivered with different specifications, and the WLan card is optional.

  I think that the WLan card is not installed in your laptop and so you cannot use it.

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye