Satellite Pro S500-14Z - how to access the BIOS?
Hello
on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?
Thank you
Karl
Hi karlS_1,
Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?
You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.
Tags: Toshiba
Similar Questions
-
Satellite Pro S500-10F: how to disable the fingerprint reader
We just purchased a portable Satellite Pro S500-10 which has the fingerprint reader. Does anyone know how we can disable this facility of the laptop, we do not remove program only disable the installation.
Thank you
You can disable it in Device Manager. If it's not ideal, I guess you could send the laptop to an ASP to have the fingerprint reader physically disconnected.
-
Satellite 2410-304 s - how to access the BIOS?
Hello!!
I need to access the BIOS of my computer. It is of a Satellite 2410 304 s. I tried with ESC then F1 but I can not adhered.Thank you for all
Hello!
Normally, you can access the BIOS using the ESC key at the beginning upward.
I had Satellite 2410 too and I was able to access BIOS by pressing ESC. You must press on immediately after power on the laptop.
Check it!
-
Satellite Pro A60-221 - how to reflash the BIOS?
Hello
I was installing a new fresh OS on a Satellite Pro A60-221(PSA65E-02E03TFR), I wanted to take it seriously, so I tried to update the BIOS. I used the program given by Toshiba in a zip file: bios - 20070808110029.zip, the program is called: Osaka20V190.exe.
I run it, in the end, the computer turned off, so I reboot it. Since then the computer do 4 beeps, 1 long 1 short 1 long anda the last short I think that the shutdown of the computer itself.So I think that I should have made a huge mistake (perhaps because that I run Osaka20V190.exe directly in the zipfile whithout put on the desktop for example, stupid, stupid, stupid...), and my question is:
Is it possible to Flash the bios to the default without having to start the computer? As in a motherboard, you can put a jumper between the two pins?If the answer is already in this forum, I'm really sorry to bother you, I searched in the pro A60 series but could not find.
Best regards.
Hi hyeud,
> maybe because that I run Osaka20V190.exe directly in the file zip whithout to put it on the desktop for example
Yes, generally all the files of zip archive must be extracted first before starting the update, but now it s too lateSuch a reflash BIOS what you hear can only be initiated because on the Toshiba authorised service provider Web site, you can download a Windows based BIOS update.
To contact the closest service provider authorized in your country. Guys can you help you get rid of this problem. :)
-
How to access the BIOS on Satellite Pro A120
Sorry for my English.
But I need help:How to access the BIOS on my Satellite Pro A120
Hello
If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop
-
Re: How to access the BIOS on Satellite Pro A120
Can someone tell me how to access the BIOS on my SAT Pro A120?
Hello
You must press ESC and then F1 key immediately after the laptop has been powered!
The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!
Good bye
-
How to access the BIOS on Satellite A110-195 settings?
How to access the BIOS settings (CPU, video memory ect). I have http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 18639
At the start when the Toshiba start screen appears press F2 repeatedly and you should be able to enter the BIOS settings.
-
How to access the BIOS on Satellite C50-A-1F
Hey folk,
A small question:
How to access the BIOS of my laptop?
I tried this method and f12, f1, f2 etc.
Thanks in advance
Have you ever tried to look for similar issues here in the forum?
Check this one:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76740 -
How to access the BIOS on Satellite L670-134
Hello
I need to access the BIOS, but I don't know the key combination.
Tried F1 F2 DEL Backspace etc that none worked.
I think I activated an option such as quick start once before... when I turn on the laptop I see not all postscreen, the screen remains black after turning on the laptop, and then the windows logo appears.So, how to access the BIOS!
Hello
Usually, you can access the BIOS by pressing the "F2" immediately after that the laptop was turned on!
Try this once more. Alternatively, you can press F2 repeatedly to be sure that this has been accepted.Also try key INS all by turning on the laptop and then F2
-
How to access the BIOS on Satellite P100?
Hello world
I have a P100... How to access the BIOS to see if it is why my optical mini mouse does not work?
When I plug something into the USB, it works fine.
The new mouse wheel works but the mouse will not move the cursor. Thanks for the help.Hello
You can access the BIOS by pressing the F2 key immediately after that the laptop has been powered.
But I put t know why you need to access the BIOS, if the USB mouse doesn t work
You won't see anything in the BIOS about the USB mouseI think you should check the mouse settings in the control panel-> mouse
-
I am trying to install a new OS, how to access the bios on my HP Pavilian dv8?
Hello:
You should be able to access the BIOS by pressing the F10 key as soon as you see the HP welcome screen.
Paul
-
How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?
I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?
I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.
-
Qosmio G30-126 - how to access the bios!
I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?
Hello
Try pressing the F2 key by turning on the device.
The Toshiba notebooks supported the ESC and then F1 button
If these two options are possible -
How to access the Bios setting?
Anyone know how to access the Bios definition please?
Thanks in advance for your help.
Hello
First of all, it would be very interesting to know what unit you have.
Generally, it should be possible to get into the BIOS by pressing ESC then F1.
Try it.Good bye
-
HP pavilion h8-1230: how to access the bios pls help
How to access the bios and I got windows 7 but to give birth to windos 10 with the thing free upgrade I got Pls Help
Immediately after pressing the power button to turn on to start by pressing the F10 key.
Maybe you are looking for
-
put the cd in viewnx2 and no way to open them. I have xp
-
CD will not play on other CD players.
original title: will not PLAY ON OTHER READERS of CD GRAVE of CD. RESPONDS WITH A MESSAGE 'NO DISC '. IS IT POSSIBLE THAT WINDOWS MEDIA DOES NOT CLOSE THE CD - R CORRECTLY ONCE THE BURNING? I asked this before and got some advice and it took but no
-
Data protection Dell 'Exception thrown (RN:01 A 00002).
Latitude E6520 Windows 7 64-bit new installation, installed Dell Data Protection, activated the function of encryption and it did not work for a few days. Today, I tried to start it to the top and 'Exception thrown (RN:01 A 00002)' after clicking 'Ok
-
Hello I'm working on JDE 4.2.I Put center manager and other components of the field. But I wasn't able to move only editfield. Please tell me wat can be mistake. That's how I add as below. But the cursor remains at the same position like that. passwo
-
My usb ports have no power in my toshiba satellite with windows 7. I don't know what to do.