Satellite C75D-A-108: Debian Ubuntu - fatal server error: no screens found

Similar Questions

• EasyStartup 3.8.1c fails to load on TS140: error fatal server: no screens found

  I just got a TS140 (70 has 4-000HUX). After unpacking, I installed 4 x 2 TB SATA HDs, attached to my external USB DVD drive, set the BIOS to boot first from the DVD drive and inserted the DVD EasyStartup supplied with the system.

  The program starts very well and then falls back to the command prompt of the Red Hat with the following message:

  (EE) VESA (0): address V_BIOS 0xd00 out of range

  (EE) Or screens are, but none has a usable configuration

  Fatal server error:

  no screens found

  I tried to change the setting of the built-in VGA in the BIOS, but (obviously, since I'm writing this) no joy.

  Not that I necessarily need this program to configure the server. But I'd like to see what he can do.

  I also don't see the opportunity to press Ctrl-I to enter the Intel Rapid Storage Technology BIOS utility, even if I set the type of SATA RAID controller in the BIOS.

  And it is not clear to me is simply that the password of manageability Intel by default even if I can get to the login prompt.

  Any help is greatly appreciated.

  And...

  I thought about it.

  Apparently, it is not a good idea to change the startup parameter in UEFI only. Cannot use EasyStartup or the Intel RAID BIOS in this mode.

  I still need to figure out if the Intel management interface. I have reset it and apparently the old and password is "admin" but it will not accept a new password.

• Question about the graphics card of the Satellite P50t-B-108

  Hello

  I think to buy the Toshiba Satellite P50t-B-108 model.
  Can you tell me if this phone has some kind of graphic hibrid (he uses both the graphic processor Embedded Intel and AMD one?) or simply the radeon graphics processor?

  I need to install a linux distribution (I might go with ubuntu, but it's not important) and what I need to know is if the HDMI works...

  Thank you.

  Hello

  As far as I know the Satellite P50t-B-108 was equipped with the graphics card AMD Radeon R9 M265X.
  In addition the Intel® Core i7-4700HQ processor supports the Intel HD Graphics 4600
  This Intel HD 4600 graphics unit is part of the Intel CPU.

• Need driver Win7 for Satellite C75D-A7310 chart

  Hello

  I have a new Satellite C75D-A7310 and windows 7 64 bit is installed but cannot find the drivers for the video chipset. Does anyone have an idea where I could get it. I tried from Toshiba Web site which was no help.

  Thank you

  Hi Panzerman

  It was not easy to find something useful because all newer models with processor AMD Quad-Core A6 - 5200M accelerated with AMD Radeon HD 8400 graphics card are not supported for Win7.
  After long search I found the oldest Satellite C50D-A model with the same specifications so it is supported for Win7 64 bit display driver, you can find here. I hope it will work for you.

  By the way: I hope that you have created media recovey if your laptop comes with preinstalled OS.

  Post comments.

• Satellite L50-A-108 - what RAM modules are compatible?

  Hello!

  I have a C50-A-108 with processor Intel® Core i5 - 3230M (3 m Cache, up to 3.20 GHz) rPGA.
  I want to add a stick of RAM, and I wonder if this specification: DDR3/L /-RS 1333/1600 for my motherboard means that I can use a RAM DDR3L.

  My laptop has already installed a DDR3 RAM (1,600 MHz), so I found a stick DDR3L 1.5V 1,600 MHz with the same timings as my system and I want to buy it. Before that, I want your opinion.

  Thank you.

  Hello

  To my knowledge, the Satellite L50-A-108 was equipped HM70 mobile Intel Express Chipset. Is this correct?

  Express chipset mobile Intel HM70 supports 2 GB modules / 4 GB / 8 GB DDR3 1333 (PC3-10600) SO-DIMM and max 16 GB of RAM

  The Intel Core i5 - 3230 M CPU processor supports DDR3/L /-RS 1333/1600 modules and the speed of the module is related to the speed of the front side bus.
  http://Ark.Intel.com/products/72164/

  In the case where the FSB is limited to 1 333 Mhz, 1600 Mhz modules would be pointing down.

• {Cannot acess Photos in iCloud - "Internal Server Error", "error code": 500}

  Hello. I've always used Photos app inside icloud, but since 2 weeks ago, I just cant. Whenever I try to use photos inside icloud.com app I got the same error ("Internal Server Error", "error code" {: 500}.)

  I can still see my photos get updated through photostream and icloud windows app. The problem is the only application of photos inside icloud.com

  IS FATAL

  true

  NAME OF THE APPLICATION

  photos

  TYPE

  Server

  JOURNAL

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  BUILD NUMBER

  15G.98d4967

  HOST

  www.iCloud.com

  USER AGENT

  Mozilla/5.0 (Windows NT 10.0;) WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/48.0.2564.97

  IDDM

  1029823930

  ENVIRONMENT

  PROD

  RECENT JOURNAL POSTS

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  Can someone help me?

  I tried to disable the photos on my iphone app, turn back on, nothing works.

  The strange is that the problem is just on icloud.com. Sync on my ipad, iphone and windows app work perfectly. Does anyone have an idea? Its been going on for 20 days

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• A fatal bus error was detected on the function of the peripheral bus component 0 7 0

  Hi all

  I'm trying to diagnose a hardware problem with my Dell PowerEdge R410. The problem occurred after a kernel patch and reboot linux security (I'm under Ubuntu 14.04 and I'm on Linux 3.13.0 - 100-generic). Initially, the machine would crash when starting in the BONE, but I managed to do always start too.

  I see the following errors:

  --------------------------------------------------

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on the function of the peripheral bus component 0 7 0.

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on an element at location 1.

  ----------------------------------------------------

  I'm having a hard time figuring what component, it exactly. Here is the result of lspci:

  ------------------------------------------------------------------------------------------------

  00:00.0 Host bridge: Intel Corporation 5500 IO Hub port ESI (rev 13)
  00:01.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 1 (rev 13)
  00:03.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 3 (rev 13)
  00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 7 (rev 13)
  00:14.0 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub System Management records (rev 13)
  00:14.1 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub GPIO and Notepad records (rev 13)
  00:14.2 PIC: Intel Corporation 7500/5520/5500 / X 58 control status of e / Hub and RAS records (rev 13)
  00:1 a. 0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
  00:1 a. 1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
  00:1 a. 7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #2
  00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
  00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
  00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
  00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
  00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #1
  00:1E.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
  00:1F.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
  00:1F.2 IDE interface: Intel Corporation 82801JI port (ICH10 Family) SATA IDE Controller #1 4
  00:1F.5 IDE interface: Intel Corporation 82801JI port (ICH10 family) SATA IDE Controller #2 2
  01: 00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  Serial Attached SCSI 03:00.0 controller: LSI Logic / Symbios Logic SAS2008 PCI - Express Fusion - MPT SAS-2 [Falcon] (rev 03)
  04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
  Fe: 00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture generic Non-core records (rev 02)
  Fe: 00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture system address Decoder (rev 02)
  Fe: 02,0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
  Fe: 02.1 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 0 (rev 02)
  Fe: 02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port link 0 (rev 02)
  Fe: 02.3 Host bridge: Intel Corporation Xeon 5600 Series mirror Port link 1 (rev 02)
  Fe: 02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
  Fe: 02.5 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 1 (rev 02)
  Fe: 03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
  Fe: 03.1 Host bridge: Intel Corporation Xeon 5600 Series Memory Controller target address decoder built-in (rev 02)
  Fe: 03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
  Fe: 03.4 Host bridge: Intel Corporation Xeon 5600 Series integrated Memory Controller Test Registers (rev 02)
  Fe: 04.0 Host bridge: Intel Corporation Xeon 5600 Series memory controller channel 0 control integrated (rev 02)
  Fe: 04.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 0 address memory (rev 02)
  Fe: 04.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller 0 (rev 02) grade channel
  Fe: 04.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 0 control thermal (rev 02)
  Fe: 05.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 controls memory (rev 02)
  Fe: 05.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 (rev 02) memory address
  Fe: 05.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 row (rev 02)
  Fe: 05.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 control thermal (rev 02)
  Fe: 06.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 controls memory (rev 02)
  Fe: 06.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 (rev 02) memory address
  Fe: 06.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 rank (rev 02)
  Fe: 06.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 controls thermal (rev 02)

  ------------------------------------------------------------------------------------------------

  So, one of the components seems to be "00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 hub of e/s PCI Express Root Port 7 (rev 13)", but I'm not clear as to what this component is
  and what it connects too. Crack, "a fatal bus was detected on an element at location 1." seems too vague. What is slot 1 in this case?

  My questions are:

  What components apply to critical errors?

  I have to do things in the following order:

  -Unplug the power cord and hold it for 20 seconds
  -Firmware updates
  -Try reinstalling components
  -Replace parts

  PS. I'm no longer under warranty

  Thank you

  Dave

  Hello

  Location 1 must reference slot PCie 1. It is very likely the slot in which the PERC controller is. Your order of troubleshooting is correct. If it's the only occurrence, resettlement and the firmware update are probably enough.

• Windows 7 restarts randomly, A fatal hardware error occurred.

  * original title - Win 7 PC - reboot randomly - expert ideas, would like to make an analysis of dump and whether it is a question of specific material. Thank you for your ideas and experience. -PC_Perg__ *.

  Dear friends:

  
  

  I have a frustrating time with my PC restarted at random. I have the log of events (System) such as details below.

  
  

   

  Log name: System

  Source: Microsoft-Windows-WHEA-Logger

  Date: 18/01/2011 18:24:55

  Event ID: 18

  Task category: no

  Level: error

  Keywords:

  User: LOCAL SERVICE

  Computer: PC

  Description:

  A fatal hardware error occurred.

   

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: error in Cache hierarchy

  Processor ID: 0

   

  View details of this entry contains more information.

  The event XML:

    

      

      18

      0

      2

      0

      0

      0 x 8000000000000000

      

      304971

      

      

      System

      PC2008

      

    

    

      3

      0

      0

      0xb64c400000000145

      0x3a1c86a0

      0 x 0

      9

      1

      256

      4

      256

      1

      256

      256

      256

      928

      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

    

   

  *****************PC  Spec********************************************

  Microsoft Windows [Version 6.1.7600]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

   

  C:\users\administrator>Systeminfo

   

  Host name: PC

  Name of the operating system: Microsoft Windows 7 Professional

  OS Version: 6.1.7600 Build 7600 n/a

  OS manufacturer: Microsoft Corporation

  OS configuration: Standalone Workstation

  OS Build type: multiprocessor Free

   

  Starting system: 18/01/2011, 18:24

  System manufacturer: power O.E.M.

  System model: O.E.M. power

  System type: X 86-based PC

  Processor (s): 1 processor installed.

  [01]: x 64 family 15 Model 15 Stepping 0 AuthenticAMD

  ~ 2266 Mhz

  The version of the BIOS: American Megatrends Inc. 1018.001, 30/12/2005

  Windows directory: C:\Windows

  System directory: C:\Windows\system32

  Starting device: \Device\HarddiskVolume1

  Local system: en - us; English (United States)

  Input locale: en - us; English (United States)

  Time zone: (UTC-05:00) Eastern (U.S. & Canada)

  Total physical memory: 2 047 MB

  Physical memory available: 933 MB

  Virtual memory: Max size: 7 139 MB

  Virtual memory: available: 5 910 MB

  Virtual memory: in use: 1 229 MB

  Office (s) swap file: C:\pagefile.sys

  G:\pagefile.sys

  Domain: workgroup

  Logon server:------.

  Corrections: 33 fixes installed.

  [01]: KB971033

  [02]: KB2436673

  [03]: KB2467659

  [04]: KB958488

  [05]: KB971468

  [06]: KB972270

  [07]: KB973525

  [08]: KB974332

  [09]: KB974431

  [10]: KB974571

  [11]: KB975364

  [12]: KB975467

  [13]: KB975560

  [14]: KB976098

  [15]: KB976325

  [16]: KB976662

  [17]: KB977074

  [18]: KB977165

  [19]: KB978207

  [20]: KB978251

  [21]: KB978262

  [22]: KB978542

  [23]: KB978601

  [24]: KB978886

  [25]: KB979306

  [26]: KB979309

  [27]: KB979683

  [28]: KB980182

  [29]: KB980195

  [30]: KB980232

  [31]: KB980408

  [32]: KB981332

  [33]: KB982214

  Network adapters: 2 interconnect installed.

  [01]: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Eth

  Ethernet Controller

                                  

   

  [02]: 3Com EtherLink 10/100 PCI for complete PC management

   

  -NIC (3C905C-TX)

   

   

  C:\users\administrator >

  Are all drivers such as your network card, card video, printer and other drivers or applications all the updates?

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Whenever I try to restore my backup as soon as the time is up, he said: Server error and I lost everything on my phone and I want to know why this fault keeps coming back?

  I need this resol cause I am, after all, lose and iCloud comes up constantly as the server error when I try to use iCloud backup to restore everything and only time is this error appears

  See if it might help - If iCloud backup could not be completed or you can not restore - Apple Support

• iCal 'server error' and '509' error

  For the last two days, when I try to add or edit an event in iCal I get the warning triangle and when I click it I get "server responded with"509"operation CalDAVMoveEntityQueueableOperation". If I go back to the server, I get the same message. I can't seem to make changes stick.

  Today, I decided to try and go straight to the calendar on iCloud. I can even add an event there - it says "Server error, please try again."

  At the same time (so) calendars are not sync between devices (3 desktop computers and 1 laptop all connected to my iCloud).

  I SCREW on this calendar - how can I fix?

  Sigh.

  I also have this problem. Please advise, this is a crucial issue. We have several iMac/Macbook Pro and we all calendars in iCal with the iCloud accounts and it is essential that we share your calendars with each other.

• unauthenticated Server error

  I had an account for a long time of Firefox, the latest version, she has 5 accounts. Recently, I got fat fingers when pops up another window and suspect that I clicked on a tab or the drop-down list. Don't know what I did. Nevertheless, the top e-mail account is no job of longwer. Others are working properly. Unable to send or receive new e-mail messages. Get an error message that says that "the server said I can't do that in my current state (unauthenticated Server error). It also appears that not all my messages in my Inbox are there (I no 2015 2014 but). I went into the account and all looks the same to me (that is to say, things correctly spelled, look like correct server, etc.). Part of me wants to delete the account and add it back, but I'm afraid I lose my folder structure, etc., or permanently lose some messages from 2015. Those who are supposed to be cached on the local machine, so missing them is odd. Any suggestions on a low risk difficulty attempts? It's an Outlook account.

  See this discussion about the current problems with hotmail/outlook/live accounts:

  https://support.Mozilla.org/questions/1087365

• verification failed - there was a connection to the Apple ID server error?

  I am signing in iCloud, but whenever I try, a message appears saying: "check failed, there was a connection to the Apple ID server error" I can't use all the apps, and I tried to restore my iPad and reset my network settings and nothing works. Help, please!

  Try to connect to iTunes and insert it again (I know you talk about audit iCloud, but the signature of and then back into iTunes will ensure that the password that is stored on your device for your ID Apple is correct: settings > iTunes, select Apple ID, click on Sign Out, and then sign.)

  See you soon,.

  GB

• A connection to the Apple ID server error

  I've had problems of connectivity for two days now on my iPhone 6. I tried hard reboot. Another phone in the account works fine. I can't access to safari, mail, where is my iPhone. I am faithful religious in my apps and iTunes, but get the verification failed there was a connection to the Apple Server error id. In safari, that it says cannot open page because it does not connect to the server. When you try to access mail it says the connection to the server has failed. I tried to reset my network settings, tried to restart a record outside of apple. No luck. Anyone know how to solve this problem.

  you experience these server problems when wifi is connected or your 4g or lte?

• Why open links in Firefox causes a "Server error in ' / ' Application Runtime Error" but not in "Internet Explorer"?

  When I click on certain links in an e-mail message (and Firefox is the default browser), I get the following error:

  In the Application Server error ' / '.

  Runtime error
  Description: An exception occurred while processing your request. In addition, another exception occurred during the execution of the custom for the first exception error page. The request was interrupted.

  If, however, I follow the same links (and Internet Explorer is the default browser), I get no error and the good content of the link is displayed.

  What is causing this error? As I prefer Firefox, how can this problem be fixed?

  Windows 7 Service Pack 1 operating system
  Firefox Version 32.0.1
  Internet Explorer Version 11.0.9600.17280

  Thank you for your help.

  First

  When you look at the address in the address bar, it seems to coincide with the e-mail?

  It seems that Firefox has sent the server something it was not expected. Sometimes this can be caused by obsolete or damaged cookies - assuming that you have visited the site before. It could also result in changes of standard information sent to servers such as the string 'user agent' that specifies your version of browser and operating system.

  To clear cookies for a site, while displaying a page on the site, either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.

  Then try to reload the page. Who help me?