Satellite C875: Changes in Windows recovery after update to 8.1 Windows

Similar Questions

• Satellite L775: No download 'BlueRay Player' after update for Windows 8

  Hello

  Please help me...

  After upgrade from win 7 to win 8 it is not possible for playback of bluray on my Satellite L775.
  Where can I download the software for bluray playback?

  Under the following link, it says that Toshiba offers to install the TOSHIBA Blu - Ray player (last third section grey highlight).
  http://www.Toshiba.EU/innovation/generic/Windows8-upgrade-stepbystep/

  I'm looking for the web now for several hours, but could not find this software...

  Thank you.
  Carine

  Hello

  I read in the forum that Toshiba 'BlueRay Player' is a software under license and, therefore, it of not possible to download this software from Toshiba UE driver page.

  If you want to install and use the "Blu - Ray Player" Toshiba after updated Win 8, you must contact the center of Toshiba Support Officer (hotline) and ask these software download.

  There is also another option to play the Blu - ray disc. You could use a tool of 3rd pieces called VLC player (free) that allows you to stream movies.

• Satellite Pro L670-18F - pilots missing after updating BIOS

  I have a Satellite Pro L670-18F and I recently updated the BIOS to version 1.5, recommended by the site, but now my internet speed is VERY slow and I have some devices in the Device Manager without drivers related to the bios (from Googling) and so I realized that the bios has been a problem.

  Does anyone know this laptop came with to downgrade the BIOS version? Also, if I reinstall windows will I receive a new bios version or will it would not affected?

  Hey,.

  Did you download and install the correct version of the BIOS of your laptop? Satellite Pro L670-18F belongs to the series of PSK3FE AFAIK, so have you chosen BIOS for this series of model?

  In addition I recommend you load the default settings in the BIOS. Just press F9 key if you are in the BIOS Setup.

  If you reinstall Windows, the BIOS will not be affected. BIOS and Windows are different, you will always have the latest version of the even you change your operating system.

• Windows 7 fonts changed to windings symbols after update - USEFUL SOLUTION

  Hi guys,.

  This just happened to me, after an update to windows 7 Home premium.
  what you can do, is Windows Explorer actually type the location of your fonts directory: C:\WINDOWS\FONTS or ANY directory to browse your system
  The system really knows what you type and will take you to any directory that you type in the Search Explorer bar. So just type as usual.
  I had already tried recovery mode (F8) and which dates back to 2 former States which have been listed, but that did not help me. Yet the symbols.
  After I rebooted in MODE without FAILURE (F8) and looked in my repertoire of FONTS, I discovered that I had only 3 fonts left on my system as a result of a kind of software change, update windows etc. Luckily, I backed up all my fonts in one archive .rar months earlier and downloaded archive .rar on Google Drive.
  I am now connected to my server dedicated via desktop remotely, download the fonts I have downloaded Google.Drive to the dedicated server.
  You just know the image to some system files and the locations of the system to navigate your system with symbols. Just click on the Start button and look for the picture of the BLUE SCREEN (computer & Windows Explorer)... I hope that it works and is useful for a person, including me!
  Then what I did use remote desktop and a FTP client that I already had on my FTP in my dedicated server system and the directory name of the fonts downloaded into a long name conscientious, so that I would be able to tell what it was by the symbols. I added a bunch of capital L to the name of the directory, which in turn, makes the symbols appear as a square. So ALEX is converted into a bunch of squares.
  Now, once the transfer FTP (download) has done to my system symboled, I intend to select ALL (CTRL + A) fonts in the directory downloaded, copy (CTRL + C) and PASTE (CTRL + V) into my Windows fonts directory.  Wish me good luck.
  
  
  I have a backup of 3 124 fonts. If anyone would like a copy of the policies for their care, I downloaded archive .rar for you. In case you don't have any backups or fonts on the left, they will be here:
  http://www.urbanradiousa.com/downloads/WindowsFonts.rar
  WOOOHOOO! Update! I just FTP'ing and re - install my fonts. I'M BACK TO NORMAL. Once windows installed the fonts, the system changed immediately to the appropriate police and symbols have disappeared! LONG LIVE GOOGLE!
  
  
  Good luck
  I - * address email is removed from the privacy *.
  
  
  Hope this helps someone out there.

  Hi guys,.

  This just happened to me, after an update to windows 7 Home premium.
  what you can do, is Windows Explorer actually type the location of your fonts directory: C:\WINDOWS\FONTS or ANY directory to browse your system
  The system really knows what you type and will take you to any directory that you type in the Search Explorer bar. So just type as usual.
  I had already tried recovery mode (F8) and which dates back to 2 former States which have been listed, but that did not help me. Yet the symbols.
  After I rebooted in MODE without FAILURE (F8) and looked in my repertoire of FONTS, I discovered that I had only 3 fonts left on my system as a result of a kind of software change, update windows etc. Luckily, I backed up all my fonts in one archive .rar months earlier and downloaded archive .rar on Google Drive.
  I am now connected to my server dedicated via desktop remotely, download the fonts I have downloaded Google.Drive to the dedicated server.
  You just know the image to some system files and the locations of the system to navigate your system with symbols. Just click on the Start button and look for the picture of the BLUE SCREEN (computer & Windows Explorer)... I hope that it works and is useful for a person, including me!
  Then what I did use remote desktop and a FTP client that I already had on my FTP in my dedicated server system and the directory name of the fonts downloaded into a long name conscientious, so that I would be able to tell what it was by the symbols. I added a bunch of capital L to the name of the directory, which in turn, makes the symbols appear as a square. So ALEX is converted into a bunch of squares.
  Now, once the transfer FTP (download) has done to my system symboled, I intend to select ALL (CTRL + A) fonts in the directory downloaded, copy (CTRL + C) and PASTE (CTRL + V) into my Windows fonts directory.  Wish me good luck.
  
  
  I have a backup of 3 124 fonts. If anyone would like a copy of the policies for their care, I downloaded archive .rar for you. In case you don't have any backups or fonts on the left, they will be here:
  http://www.urbanradiousa.com/downloads/WindowsFonts.rar
  WOOOHOOO! Update! I just FTP'ing and re - install my fonts. I'M BACK TO NORMAL. Once windows installed the fonts, the system changed immediately to the appropriate police and symbols have disappeared! LONG LIVE GOOGLE!
  
  
  Good luck
  I - * address email is removed from the privacy *.
  
  
  Hope this helps someone out there.

• Satellite U940 - BT does not work after update from BT Stack

  Hello

  The bluetooth in my U940 Satellite with Windows 8, 1-update stopped working properly after I updated the Bluetooth Stack version: v9.10.32T because one of the programs pre-installed Toshiba told me to do.

  The option of connection / disconnection of Bluetooth in windows discovers tiles disappeared. There is no information on the bluetooth it more.

  Bluetooth seems to be installed and when I try to pair a bluetooth Toshiba bluetooth speaker Manager opens (until I could only connect the windows bluetooth devices). The connection with the speaker sometimes is done properly, but after you connect and reconnect the audio speaker is not passed over.

  I tried to reinstall the battery Bluetooth and then trying with an older version, but nothing works.
  Also, I tried to reinstall the filter of Bluetooth driver Package (bfdp - 20131011123106.zip), but the installation does not start when the files are extracted.

  Can someone help me to fix it?
  Thank you

  PS: The laptop is still under warranty, could it be refunded?

  Very quick and good solution.
  The key is that you can use BT again.
  Thanks for the comments.

• Satellite C50-A-1 - white screen after update Win 10

  Hello

  I have a c50-A-1 satellite and my screen keeps going blank and I have to wait for it to come back on which is really annoying.
  I continue to by pressing the keys and the mouse, and it does nothing. In my power settings, it should not turn off.

  I don't know if this started after I updated to windows 10.

  Please can someone help
  Thank you very much

  Update the video card drivers from the download page for your model.

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• Changing the unexpected settings after update

  HI - George here in Rhode Island.

  I have Windows 7 Ultimate 64 bit and whenever I do a "reboot" or (I think) an update causes a reboot; my 'games' (hearts + Spider Solitaire) revert to the default settings. The "Display-bubble" option is checked and all the names of the other players return to the "North-South and West. No other user profile settings are changed.

  I know that this is a trivial question, but it's driving me crazy! I found a reference to this line that suggested Roxio Creator may be the cause, but removal of Roxio did not fix the issue. I tried to reinstall the operating system without success. The only thing I found which may relate is an error in Event Viewer

  -
  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  27991

  System

  GW - PC

  -

  SessionLauncher

  %%d Ko

  Links on the error '0 x 8080000000000000' do not seem to help.

  Any help or information would be appreciated.

  Thank you

  Hello
  Method 1:
  Perform the clean boot and check.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See the section step 7 above to start the computer by using normal startup after you have performed the steps in troubleshooting.
  Method 2:
  Method 2:
  Scan a file system (CFS) checker on your computer and see if that fixes the problem.
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  Method 3:
  I suggest to create a new user account and see if the problem still occurs, follow the link:
  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix the damaged user account following the link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  
  

  I hope this helps.

• iPad 2 Mini stuck in recovery after update.

  Hello

  After that I tried to update my iPad 2 Mini 9 IOS to 9.3 via OTA, the iPad was found in recovery mode. As it happened, here's what I tried:

  -Restore / update: isn't working, returns an error 9 most of the time, but mostly just a message telling me my iPad is in recovery.

  -do the same with several cables USB (official or spare parts), also with another Mac (I use a MacBook Pro usually) and even a PC.

  -updated my iTunes Mac, OSX...

  -using obsolete tools like reiboot for the shot on the recovery mode.

  -put in DFU.

  I have no idea what to do next. Just to let you know, it has never been jailbroken or dropped on the floor... Nothing. It has always worked perfectly. If it helps, let me tell you what happens when I try to update / restore:

  -Once iTunes has downloaded firmware (currently 9.3.1), he does things (extraction, waiting for my iPad...), then once the progress bar appears, if I updated it stops early and the screen flashes blue for a second; If I'm trying to restore the progress bar goes all the way, then the blue flash is displayed.

  If anyone has an idea on what I should try, let me know. I don't mind losing my data because I have a backup in iCloud.

  Thanks for your help.

  Hi Mivock,

  I suggest to have a look at this article and follow the instructions in the support article. Let me know if you need additional assistance.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Satellite A300D-15B - obtaining a recovery after the removal of score media

  Hello

  I'm trying to find a way to get the recovery CD/DVD for a Satellite A300D-15B. Recently, it has contracted a number of virus and become non-functional. I did not know the recovery partition of HARD drive and stupidly deleted recovery option while re-installing windows. The new facility, however, don't show the good drivers (of course) and is even the wrong version of Windows Vista, so the product key does not (Enterprise vs Home Premium). How can I get new media of recovery? I tried the Toshiba Web site but I did have a lot of luck.

  Thanks much for any help!

  Original Toshiba recovery disc can be ordered under https://backupmedia.toshiba.eu/landing.aspx
  Check it out.

• Satellite click Mini L9W - B - lost after update Win 10 software

  Hello.

  I upgraded my Windows 10 click Mini as soon as I got it yesterday.

  Everything seemed fine until I restarted and it would not start, there was a problem with the drive of the declaration.

  Finally, after having used the keylogger to unlock the drive, I have reset the machine (asking to keep my files and it reinstalled Windows 10 but I seem to have lost Toshiba programs that were out there.)

  They do not appear in the list of programs.

  Is it possible to recover without restoring unity to Windows 8.1 in the recovery and then put back Win 10 on.
  Took hours.

  Thanks for any help.
  Doug

  If you have checked the option 'keep my files' Windows 10 would still remove applications and settings but it maintains your personal files, such as images, mp3, movies, docs, etc.

  Please check this:
  Limitations of the upgrade of Windows 10
  http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

  and here you find Toshiba Windows 10 upgrade information
  http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

• Satellite C50 - no Message device Bootable after update

  I brought my C50 Satellite several months ago and his works fine until the other day.
  I played Minecraft and noticed it was a little laggy suddenly, I checked and realized my phone was doing regular updates, so I closed my game and let.

  After awhile, I went back and noticed a black screen with the message "no boot device please restart" written over and over again, I restarted the laptop but get nothing appear but not the boot device message.

  I'm not very good with computers, so any help will be greatly appreciated.

  Thanks in advance

  Tone

  Hello

  I'm afraid that the HARD disk is defective m and so the laptop isn't able to boot the system.
  You can check in the BIOS.
  All turn on/off the device, press F2. Now on the first page of the BIOS, you should see the ODD (optical disc) details and details of the HARD disk (in the case of defective HARD isn t disc).

  In case the HARD isn t listed, the HARD disk drive may not be recognized by the BIOS and must be replaced.

• Re: Satellite P850 sets a BIOS password after update BIOS 1.50

  Hi all

  I have a Satellite P850/040 and after the BIOS update to the new version 1.50 I checked that a BIOS password has been set up, if I can start the operating system.

  It's amazing. I am very disappointed with Toshiba.

  How can I remove this password? Perhaps with no matter what JCMOS rider?

  Thanks in advance.

  > How can I remove this password? Perhaps with no matter what JCMOS rider?
  Unfortunately, something like this will not work. Best thing you can do now is to contact the nearest Toshiba service provider and ask for help.

  You shouldn't be disappointed. I know it's stupid situation but make a call, explain the situation and the guy will help you.

  You will find the phone number?

• Satellite does not start without pw after updating secure phoenix BIOS

  Hello

  I am new to this forum and have the problem, which, after an update to the home page of Toshiba with Phoenix secureCore Tiano my satellite L555, wondered about a password at startup from the BIOS, I have not entered, and has never been asked. (X-)

  What can I do to get this machine started? I tried to get with the "F2"; and F12 when starting the machine, but he asks allways my about this password and after 3 'entered wrong' laptop computer closes down and I have to restart. (with the same results)

  Can someone give my an idea, how can I get my laptop to work normally? ?:|

  Thank you
  We

  Hello we

  Unfortunately it is not simply the method how to bypass BIOS password and you now need professional help.
  Please contact the nearest Toshiba service provider and explain the situation. They will help you with that.

  Sorry buddy

• IPhone 6 and 6 s go to recovery after updating ios 10

  AFTE 10 with itunes my iphone i0s update 6-6 s rise to the recovery and no start

  Help me

  Follow these steps to solve the problem with iOS 10.

  1. Connect your iPhone to your computer via iTunes.
  2. Wait about 30 seconds to let iTunes your reading device.
  3. Click Update on your computer when you are prompted, who, "is there a problem with the [device] who forces him to update or restore."
  4. Again click the update on your computer when you are prompted, "If your [device] is unable to be updated, you need to restore it to its factory settings."
  5. Click on restore if you see «your iPad cannot be updated...» "(you won't necessarily have to restore).
  6. Click Restore and update to confirm that you want to restore your device to its factory settings.

  Or you can follow these instructions If you see an error when you update or restore your iPad, iPhone or iPod - Apple Support