Satellite click on Mini - camera does not work on Win 10

Similar Questions

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Satellite A500-1f5 - FN key does not work with Win 7 64 bit

  Hello

  The FN key does not work

  I have the installer: added value package + Flash Cards Support utility

  Laptop model: Satellite A500-1f5

  WIN 7 64 bit

  Thank you

  Hello

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

  or remove the vap utility and support of flashcard and download:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Then install the utiliy and flashcard Vap, support.

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• Satellite C660-B080 - FN key does not work with Win 7

  Hello

  My laptop model is' satellite C660-B080 & only part no = 'PSC0SV-02G01JAR' with windows 7 Ultimate 64 bit SP1

  I downloaded the driver from the website, but the FN key does not

  Please help me with this.

  Thank you

  Must be installed:

  -Value Added Package for Windows 7 64 bit
  -Flash utility Cards with support for Windows 7 64 bit

  These two tools are located on the Toshiba driver pages.

• Camera does not work on my Satellite C50 - B

  C50 - B PSCMLA-02F00S satellite

  I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.

  I want a video contact in Facebook, my family and the camera does not work.

  Can someone please!

  Hi Alicia

  Are you using the original operating system preinstalled that you got with your machine?
  I assume it must be Win8.1, right?

  What happen when you try to use photo app?

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite L500 - Web Cam does not work

  Hello.

  My book built into the camera, and that camera thos not inicialize,

  I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

  Is there a way to fix it?

  Thank you.

  The question is: is cam material recognized and detected by the system or not?
  You can see in the Device Manager?

• Application of my camera does not work

  Application of my camera does not work, it tells me that something went wrong, whenever I try to take a picture, I don't know what's the problem with him. I built in camera on my laptop, and the app is updated. How can I fix?

  Hello

  It is clear from the description that you have problems with the camera application

  Here are a few things you can try

  Method 1: Download and run the troubleshooter app and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Synchronize the application license and check.

  To synchronize your licenses app, follow these steps:

  a. on the Start screen, tap or click on Store to open the Windows store.

  b. drag from the right edge of the screenand then tap settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  c. press or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.

  d. press or click on Sync licensing.

  For more information, see the link.

  What to do if you have problems with a soft

  Method 3: reinstall

  Finally, if all else fails, you may need to reinstall the application. Just right click and click on uninstall. Then install it on the app store

  If the problem persists or you want to help, reply to this message

  Ashwin0

• IdeaPad s10-3s drive easy XP camera does not work

  After the link on the top, I found all the XP drivers for my netbook s10-3s after installation, simple camera does not work. any idea on how to solve this problem? Thank you

  Problem solved
  It's really weird
  Open easy-Lenovo Camera(Make sure you install the drivers first though it wont work after installation) > Device Manager-> right click-> update driver-> click on "No, not this time"-> next click-> Choose 'don't search, I will choose the driver to install'-> choose "USB video device" and then click Next.

  That's all. But I can't yet find AMP.exe to run it so I'm going to Skype to test. Works well.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.