Satellite image of the 1PW L50 - B (WIN8.1) monitor problem

Similar Questions

• How to install the recovery on 5200 satellite image using the DVD USB drive

  Hello

  I have a problem with a 5200-902 Satellite that has the corrupted DVD - ROM, and I can't find the room to change. (model DVD: uj - 810 b)
  But I would like to reinstall the laptop with the recovery CD and I will not be able to enter the BIOS to change the boot order and start with a USB DVD - ROM.
  I removed the HARD drive and reinstall the WXp Prof by another machine, but when I restart the 5200 I read this message "error nel caricamento del operating system."

  When turning I press F2-F10-F12 but if I select another boot device starting the laptop by network.
  Can you help me get this book by an external USB DVD-ROM?

  Thank you

  Andrea

  There is no test in the past, but I guess you have to do on the track:

  Start your laptop by using the MS-DOS boot disk
  Load the MS-DOS driver for external DVD drive to access
  Boot the CD of facilities here in the hope that it will market

• Image of the iPhone 5 backup or to remove problems

  Hello

  I have an Iphone 5 and since last week, I have a few problems with the camera and Images App. Like this, it happens that whenever I click on a photo is available for immediate viewing, but when I leave the camera app and enter the photos App, the Photo Clicked do not seem to appear. I had checked in all folders. The next thing is that when I want to delete some old images, I can remove it but then he again returns to Mode selection of Images, the sign of 'Cancel' is grey and is not available to be used in this situation. So, when I leave the pictures App and still re enter the deleted Photos still appear in the Foled Images as if they were NEVER EVER DELETED. Please help for this situation.

  Thank you and good day!

  Hey c of Denver.

  Welcome to the communities of Apple Support! It seems that you are having problems with your Photos app? You should check the preferences of Photos by clicking on settings > Photos & camera on your device. Here you can check if iCloud photo library and my photo stream are enabled. If they are, we know that your photos are backed up safely in iCloud. You should check to make sure all your photos are here. To remove permanently some old images see the steps below.

  Delete pictures and videos from iCloud photo library

  In the Photos app on your iOS device, press Photos.

  Press Select, and then select the pictures and videos you want to delete.

  Press, then remove [items].

  Deleted photos and videos are placed in the album recently deleted on your iOS device, where they remain for 30 days. After that, the items are permanently removed from all your devices set up for iCloud photo library.

  You can remove items from your device until the 30 days have passed. On your device iOS, in the album recently deleted, press Select, select one or multiple items, press on delete, and then press Delete [elements].

  Remove photos from my photo stream

  On your iPhone, iPad or iPod touch

  Open the Photos app.
  Press the Albums tab.
  Tap my photo stream.
  Press select.
  Tap one or more photos. You will see a check mark on the photos you select.
  Tap the trash icon. Press Delete [number] pictures.

  My FAQ photo stream

  iCloud Photo library FAQ

  Try restarting your iPhone by holding the power button then sliding to power off. Check if your photo looks a problem persists. If you are unable to see your recent photos, try to connect to your iCloud on your device then signing in.

  Tap Settings > iCloud, scroll down and then click Disconnect. You will get some guests on iCloud synchronized the data being removed from your iPhone, you can keep it in your iPhone If you wish. Although, once you sign in iCloud, you will be able to synchronize all the data stored in iCloud. Do not forget to re activate your iCloud photo library and my stream of photos as well. You should be able to view your photos as you want with these procedures. Thank you for using communities of support from Apple!

  Have a great day.

• Satellite Pro M10: image on the screen is very dark

  I have a portable Satellite Pro M10, which has a black screen, i.e. the backlight does not work. There is an image on the screen, but it is very dark. When you connect an external monitor, I get a normal picture on this screen.

  Information from other messages here, I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but it does not solve the problem. If I bring the laptop to a service center how much it will cost about for repair? The thing is 2-3 years, so if it is very expensive I could better get a new laptop.

  I'm sure I'll be able to change the inverter Board myself, but how am I going to be able to determine that the inverter is the problem? How to get a new inverter? Is anyone of you know the number of good product?

  My Pro M10 itself has PS630E-G205Z-OF product number.

  Hello

  I agree with Tobi. You sounds description as a faulty FL inverter.
  This part is placed behind the LCD screen under the lid.
  As mentioned this part isn t very expensive and you could order the partner of Toshiba service in your country. But be aware that if you have no experience of replacement if you ask technicians for assistance.

• Re: Satellite R630 - HDMI - the image on the TV was not whole screen

  Hi all

  I just tried to connect my Satellite R630 with my LCD TV with a HDMI cable. However, the image on the TV was not all screen, with the HDMI 1 port (my TV has 3 HDMI ports), there was still the black space of 1.5 inches.

  I was wondering if there is anything I missed? The connection with the TV was very good with a good old VGA cable. Thanks for any advice.

  Tim

  Have you tried to play with all available display settings?
  I put t know who don't Satellite R630 you exactly and what graphics card is inside, but check it please all advanced options to show the settings first.

• Satellite P840 - impossible to restore the image of the system from 8.1 to win

  I have laptop Toshiba P840 accompanying windows 8.0.
  I created backups of DVD and USB

  After upgrade to 8.1 windows and backup images, I had a software problem and had to go back to a previous return in windows 8.1.

  Restore from the external HARD drive fails due to driver incompatibilities.
  Technical support advise to restore windows 8.0 and then switch again to windows 8.1
  Is there a better way to restore the windows 8.1 image?

  Is it possible to fill the boot usb (from windows 8 as the original) to 8.1 windows drivers?
  I am unable to create boot usb with windows 8.1 as the partition of hard drive has windows 8.0

  Thank you

  Modification of the original recovery image is not possible then I agree with technical support. For your new and clean OS installation should be the basic recovery image so install it again and then do the update for new Win8.1.

  Everything you can do in the future is to create the own Win8.1, but for this recovery image, you use some third-party software of the part.

• Satellite L300-2 - How to improve the image of the webcam?

  Hi all

  I have the Satellite L300-2This with built-in Chicony WebCam. I installed the driver on Windows Vista, the camera work well, but the situation is not clear. I see my picture and a little with and black pixels with it.

  I asked if some can help me to improve the quality of my web cam. I installed the latest driver.

  Please sometimes

  Thank you very much
  LHOST

  Hello

  I have the Satellite L300 but I m pretty happy with the quality of the image of the webcam.

  In any case, you must change the parameters of the webcam. If you move the mouse on the side of the life of the screen that the webcam menu should appear. Then click Properties and there you can change all settings, brightness, contrast, profiles, etc..
  Just a little more play these settings to find the best for you. ;)

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• Satellite A100-410 - no image on the internal display

  Dear readers, (also strange that Toshiba sells also in the Netherlands, and I do not use the Dutch language)

  I have a Toshiba Satellite A100-410
  I have problems after one year only (after warranty) where to plug an external monitor.
  The laptop displays not its own screen, without external screen is lighter, it starts but no picture.
  I did it with Fn + F5 but nothing

  Controlled parameters but no error detected.
  It would be nice if someone could send an email with a url so that the old setting back.
  It's a Windows XP MCE and the mechanic that all abducted and put Vista on.

  At the beginning, a lot of problems, but it was under warranty and after that install on a clean disk Vista had no problem just no image on the notebook and which isn't difficult if you use him in the hospital.

  So I hope that someone can send an email with a solution.

  Thank you
  Seggelinck

  (> also strange that Toshiba sells also in the Netherlands, and I do not use the Dutch language)

  Toshiba selling own products around the world... everyone here validate in the own language? Definitely bad idea...

  However, your question;
  Just to clarify your question; the internal screen does not work, but you can all see if you connect to the laptop to the external monitor. Is this good?

  Well, I doubt that this could be a software issue... maybe the internal screen is defective.
  What do you thing about this idea?

  Usually, you should see the start screen for Toshiba at the beginning of the startup procedure. If this screen is not visible on the screen of the laptop computers, so I guess that this problem could be linked to the failure of the display.

• Satellite L350-170: creating the image of the partition backup system

  New here so first of all, Hello to all.

  Need some advice if possible please.
  I just got a new laptop L350-170 with Windows Vista Home Premium.
  I went thro' the installation process and created with the program toshiba recovery disks but also make the thro' the post.

  What I want to do now is create an image of the full backup ' c' drive now that I have installed additional programs and adjust settings to get the laptop how I want it.

  I've tried acronis true image, but laptop won't boot from the restore cd, even tho ' cd/dvd is set in the bios as "first boot.
  Says it can't find the "boot partition" and assume that it is something with the toshiba restore program not be circumvented.

  Is there a 'ghost' type program that will allow me to create an image, and then start the disk in order to restore everything from the created image and therefore not lose everything I installed carefully?

  I suppose that, if I try to use the toshiba program once again, it will only reproduce the original installation.
  I hope someone can advise.

  TIA

  Hello!

  The Toshiba recovery disc sets only the laptop back to the factory settings. It s not a program backup like Acronis, but with the recovery disc you have installation of Windows with all the drivers and tools of Toshiba.

  What version of Acronis True Image do you use? I use version 11 and I have no problem on my laptops and PCs. It works perfectly.
  Maybe you should do a update.

  Have you set the SATA mode in the BIOS to AHCI or compatible? Maybe you need a driver SATA when you have defined it AHCI, but I think in its new version of Acronis you t need a n.

  I hope I could help a bit and if you have problems, make me know it.

  Good bye

• S70 satellite image quality - A - 11 H web camera is not good

  Hello

  Running windows 8.1 which came with the laptop.
  New out of the box.

  According to the title.

  I find the quality of the image of the camera very grainy color image, poor etc.

  When I start the webcam using the search bar on the right, he begins using the Microsoft application, when you access all the parameters that is available under settings/options is Photo image format, the grid lines, the location information.

  I've been in touch with Toshiba support who advised to do a refresh of laptop, I did.
  It made no difference.

  After which they asked me to find the Toshiba web camera application on your laptop, it should have been in the Program Files folder in the folder of Toshiba.
  This application does not exist on my laptop.

  Technology verified the same laptop model, that he was available, he said when he selected the webcam, he opened using Web of Toshiba, Microsoft no camera app.

  I looked at the other portable Toshiba with web cameras and found the picture quality to be better. Unable to get to settings and these computers portable on-screen and in demo mode, so locked up to a certain extent.

  I can't believe a web camera in this day and age for this value of laptop to have this bad image quality. My digital camera of 10 years ago has a better picture quality.

  I checked through the laptop, and I don't have this app installed.

  I have checked for software and drivers updated to my laptop and cannot find this application applies to my laptop. Etc drivers seem to be up to date.

  I would like to know, other users of this series S have any camera image quality problem.
  What application is used when the camera is selected, Toshiba or Microsoft.

  Is Toshiba web camera application for Windows 8.1, that I don't see not listed for 8.1
  This sounds like a hardware failure or a problem with the application/software.

  Any guidance or help on this would be appreciated, because I came to a point of the return of this laptop for a refund.

  Thanks in advance.

  D.

  Yes, I tried using FORCE!

  > Technology checked the same laptop model, that he was available, he said when he selected the webcam, he opened using Web of Toshiba, Microsoft no camera app.

  Toshiba webcam app is available for the system Win 7 but win it 8 and 8.1 of Windows system use the webcam from Microsoft to the own address application.

  > I looked at the other portable Toshiba with web cameras and found the picture quality to be better.
  Different Toshiba laptops are equipped with different webcams.
  Satellite S70 - A - 11 H was fitted with a * 0.92 mega pixel webcam *.

  For example a Satellite A660 was equipped with a mega pixel webcam_ _1.3M

  There is therefore a difference of resolution of the webcam

• P850 satellite destroyed by the Windows operating system

  Hello.

  I own a Toshiba Satellite laptop model: P850 part number: PSPKFV-00H002AR bought the United Arab Emirates.
  OS: Windows 8 x 64 pre installed/installed at the factory.

  It doesn't have the capabilities of the 3D display.
  There can be no Blu ray.
  It has the fingerprint reader.

  Since I started using it I have big problems with the operating system, drivers and utilities Toshiba.
  * I'll post the PROBLEMS the MOST IMPORTANT I have so that I can get help easier.*

  Initially, the laptop felt good, utility worked as they should. the only thing that was not at any time was the ECO button, but not a big problem. * Accelerator of Toshiba HDD has been working flawlessly.*

  The first thing I did when I started using my laptop has become familiar with the operating system and of course to create a secondary partition for my stuff (files and so on)

  I used a * free * 3rd party software called:
  * Mini partition Wizard tool * which turned out to be very good.
  http://www.partitionwizard.com/PartitionManager/Windows-8-partition-manager.html
  (no not advertising, it's a free and very useful program)

  Before performing any operation, I made a thorough search for the operation of the recovery and windows partitions 8 so that I don't accidentally makes them useless.

  * The first thing I did was record to create 3 DVD using "Toshiba Recovery Media Creator."

  * Then using the above mentioned software (partition Wizard) I created a second score by taking the amount of space between the Rugged C
  * During the creation of a second partition (called D) I _DID friezer move, resize, format or fusion of the partitions.* system and recovery plant

  Then I continued using the computer for things I usually do. I've updated some drivers, windows installed and computer updates worked well.

  * Then Microsoft has officially released windows 8.1 * so I decided to give it a try. I have read the manual about installing "* updated Windows 8.1 *" Toshiba driver download page. Windows 8 updates installed, then went to store * downloaded windows 8.1* and waited the installation.
  Then I continued to update my drivers as it said in the manual.

  * When working with partitions on my drive and before installing windows 8.1 I Formaldeide disk of windows and Partition Assistant Manager screenshots_ *.

  * After the installation of Windows 8.1, I immediately noticed that the installation has created a partition_ of recovery (also known as Windows RE) _the with the 350 MB_ _size *.
  I of course took screenshots of windows disk manager and mini partition Wizard tool.

  I'll upload the screenshots as soon as I can please stay tuned.

  > Y at - it a way to factory reset and return to windows 8 and return the * HDD factory State? * Exactly as it was when I opened the box?

  Of course, you can return to the factory settings. You said that you have created 3 discs of recovery using Toshiba Recovery Media Creator.
  These disks will again install the image of Toshiba and will fix the laptop in the same condition as at the first day of the purchase.

  Take the first disc, the start of this drive and follow the instructions on the screen

  Note: this will format the HARD drive and delete the created partitions.

• Satellite L300 - Download the recovery disk?

  Hey there,

  can anyone help? I got a Satellite L300 and today I wanted to reset everything. So, I started a recovery of the product. Too bad I haven't checked the DVD before you start. It struck although I use it before. So recovery stopped in the middle of nowwhere. I can't complete recovery - I can't launch computer - and I can't copy the disc on another computer (tried of course).

  Is there a site where I can download a disk image of the recovery of product anywhere?

  Thank you!

  Hey horst,.

  You can download t the Toshiba Recovery disk, but you can order a new one by clicking here:
  https://backupmedia.Toshiba.EU/landing.aspx

  By the way: If the operating system preinstalled by Toshiba is still installed you can also use HARD drive recovery option. So go to the advanced boot menu and select Repair my computer. After that, you have factory again and you can create a new recovery disk.
  But remember: it is only possible on preinstalled OS. I guess it is Vista?

• -What is the image of the Equium A200-1V0 correct on the website?

  As noted above, is the image of the Equium A200-1V0 correct on the website?

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=138201

  When you enlarge the image, it is said by Satellite on the front of the laptop (as for Satellite laptops).

  Can I be assured that the laptop will look exactly like this (with or without the 'Satellite' on the front), I like the design and do not want to end up with something different.

  Help is much appreciated, thank you!

  If you answer with you email address I can take some pictures high resolution of mine and you send to compare :)

• Swap image + click the Swap Image & catering help

  Hello world

  I can't figure this and hoped someone could help me with the code. What I currently have is a map of the world for my books. What I want is to have several hot spots that change the image (map of the world) in five ways.

  1. when the mouse passes over a continent he inverts the image of the continent with a rollover, letting you know that this continent is clickable.

  2. when the mouse leaves the continent he restores the original image of the world map.

  3. When you click on the continent, it inverts an image "zoom in" on the continent.

  4. the image # 3 (zoom-in) remains on the screen until you click. Clicked on it once then returns to the original image (the world map).

  5 when the continent is double-clicked it sends you to another browser with the continent.

  I have all of them except for #4 figure. As soon as the mouse moves out of the hotspot, the "zoom-in" image refers to the original image.

  Here is the link to what I have so far: http://christopherdeldridge.com/photo%20World%20Map.html

  Here is the code I have for one of the hotspots for one of the continets:

  < = area shape "poly" coords = "64,211,188,211,208,213,231,216,265,217,272,234,295,240,316,227,343,225,357,241,368,226,364 335,145,310,134,280,137,255,141,231,144,196,147,170,143,132,146,127,174,144,188,1, 203,347,195,315,196,288,198,264,202,246,200,241,171,288,163,315,156" alt = "" style = "cursor: pointer; "" "onclick ="MM_swapImage ('ZenitaSatellite ',", ' photos/Satellite Map 2/WestVadra 2.gif', 1) ' ondblclick ="MM_openBrWindow ('Vadra Photo.html', ",")"onmouseover =" MM_swapImage ('ZenitaSatellite', ",' Pics/Satellite Map/WVadra.gif ', 1) ' MM_swapImgRestore" / >

  Thanks for the help...

  OK - Here's a start on the functionality (only implemented on the continent of WVadra (?)-

  http://GWS-sandbox.com/Eldridge.html

  Notice several things:

  1. I've renamed the images in order to make it easier to work with them (remove spaces the names of path/file & offshore).  I also have their redesign as JPG images that are half the weight of the GIF images that you have.  Images with texture like these should never be saved as GIF or PNG.

  2. I set the mouseover/click on WVadra.  If you click on the image "over" remains fixed.

  What is to do?  Each click on a location must reset the variable turn to other locations.

  What do you think?