Does not work black screen embedded youtube, twitch.tv, etc.

Similar Questions

• Z10 ATT BBZ10 10.3.2.440 blackBerry software does not work well: screen distorted, keyboard. How downgrade?

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  FDR wrote:

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  Switch magnifying glass Mode OFF in settings - accessibility.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Satellite L850D does not start - black screen

  Ok.. My wife L850D had problems with black screening started upward after the toshiba screen.

  I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade.

  Rang technical support who kindly informed that because we put 8.1 on that he cancelled the guarantee. (btw nice guy)
  Then refused to help.

  And went and reloaded Win 8 of my happens, just to see if it was a problem of hardware, software.
  (yes I know, but it must have been only temp).

  It starts fine, sitting there for centuries without problem.
  It wasn't until I downloaded the drivers toshiba, (Yes the good) did a reboot and hey presto. black screen again.

  A little, this would imply that there is a problem with the drivers of toshiba?

  OK so the wife decided screw it, put Win 7 on it.
  Restarted with disk in. sat and sat. Google finally informed me that I had to disable secureboot and put uefi in the csm.

  OK fine, went into the bios, off course start, changed to the csm uefi and restart the computer.
  Now I get nothing; screen all turns on, fan starts, cd rom shots on and nothing stops down immediately if I push the power button.

  I pulled the battery, external and internal, let rest for half an hour and still the same thing.

  Any ideas?

  The history is for me a little confused so let me start from the beginning with some basic stuff.
  In your ad write you didn t what model do you have exactly (L850D-xxx) and I can't check the specs of the laptop but I presume that this laptop comes with preinstalled OS, probably Win8.
  Laptop with factory preinstalled OS that includes all the necessary drivers and tools and utilities. One of them is Toshiba Recovery Media Creator. With this tool, you can create a recovery (DVD or USB) media and it lets reinstall the original OS if it s some problem and HDD recovery does not work.
  Best option now would be to use these media and install original recovery image. Did you create this recovery media?

  Generally speaking when you new notebook you do not have to use the original OS. You can install anything you want, and it has nothing to do with security. You can install any OS, all supported operating systems. So I do not understand how you could get info from technical support.

  In any case, try please connect your laptop to the power supply and restart laptop. What exactly happens? See Toshiba welcome screen? Try pressing F12 repeatedly. There any reaction?

• Sound does not work in Facebook or YouTube but works in Media Player

  my sound does not work on youtube or facebook but fact via media player someone has an idea how to solve this pls

  Hello

  IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
  APPLY / OK - close and restart IE.

  If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
  APPLY / OK - close and restart IE.

  Solution to Youtube or other Flash video embedded no sound in external websites
  http://www.mydigitallife.info/2007/08/16/solution-to-fix-YouTube-or-other-embedded-Flash-video-no-sound-in-external-websites/

  and, if necessary:

  Adobe Flash no sound WaveMapper trick
  http://www.mydigitallife.info/2007/08/15/Adobe-Flash-no-sound-WaveMapper-trick/

  --------------------------------------------------

  You need to maybe uninstall and reinstall Adobe Flash

  How do I uninstall the plug-in Adobe Flash Player and ActiveX control
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  Install Adobe Flash Player
  http://get.Adobe.com/flashplayer/

  I hope this helps.

• iPhone 5s does not have black screen, but the phone is still on

  So I have a very strange problem that I couldn't really get on Google.

  My iPhone doesn't come 5, after going to sleep, using the power button (my home button does not work). It will randomly start being sensitive, sometimes after 10 minutes, sometimes after a few hours.

  By trial and error, I realized that cool the phone seemed to work fairly regularly (but not 100%), but now this method no longer works.

  I'm sure that the phone is still because when I call, he goes not to the "the number you have called is not available at this time" response, it sounds just normally, but the phone does nothing.

  However, connecting to a PC is the PC not recognizing anything plugged and that the phone itself does not seem to charge.

  When he "wakes" it is as if I just plugged it and shows me the lock screen and everything is normal.

  Thanks in advance for your time

  KeremAk wrote:

  When he "wakes" it is as if I just plugged it and shows me the lock screen and everything is normal.

  By reading your post I was stuck on hardware failure, perhaps the LCD screen or logic board and then you wrote this. Please you elaberate on what you mean by "it is as if I just hooked it up". Actually connect? Does it make the chimes as you he plugged in even if you don't have?

• Bindings.Select does not work with the primitive properties like string etc?

  My code works when I use a < String > ObjectProperty, this however does not work when I use a string instead.

  Don't know if this Bindings.select behavior is a bug or expected.

  The NBS are:

  The impression is:

  ObjectProperty < String >--> < String > ObjectProperty: abc

  String-> string: null

  String-> < String > ObjectProperty: null

  I expect all cases to print 'abc' good

  import javafx.beans.binding.Bindings;
  import javafx.beans.property.ObjectProperty;
  import javafx.beans.property.SimpleObjectProperty;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.beans.property.StringProperty;
  
  public class SelectBindingTest {
  
      public static class A {
  
          private StringProperty comment = new SimpleStringProperty(this, "comment");
          private ObjectProperty<String> commentObj = new SimpleObjectProperty<>(this, "commentObj");
  
          String getComment() {
              return comment.get();
          }
  
          StringProperty commentProperty() {
              return comment;
          }
  
          void setComment(String comment) {
              this.comment.set(comment);
          }
  
          public String getCommentObj() {
              return commentObj.get();
          }
  
          public ObjectProperty<String> commentObjProperty() {
              return commentObj;
          }
  
          public void setCommentObj(String commentObj) {
              this.commentObj.set(commentObj);
          }
      }
  
      public static class B {
          private ObjectProperty<A> member = new SimpleObjectProperty<>(this, "member");
  
          A getMember() {
              return member.get();
          }
  
          ObjectProperty<A> memberProperty() {
              return member;
          }
  
          void setMember(A member) {
              this.member.set(member);
          }
      }
  
      public static void main(String[] args) {
          B b = new B();
          A member = new A();
          b.setMember(member);
  
          final String expectedString = "abc";
  
  // this works
          SimpleObjectProperty<String> targetStringObjProperty = new SimpleObjectProperty<>("initialTargetText");
          member.setCommentObj("initialSourceText");
          targetStringObjProperty.bind(Bindings.<String>select(b.memberProperty(), "commentObj"));
          member.setCommentObj(expectedString);
          System.out.println("ObjectProperty<String> -> ObjectProperty<String>: " + targetStringObjProperty.get());
  
  // this doesn't work
          SimpleStringProperty targetStringProperty = new SimpleStringProperty("initialTargetText");
          member.setComment("initialSourceText");
          targetStringProperty.bind(Bindings.selectString(b.memberProperty(), "comment"));
          member.setComment(expectedString);
          System.out.println("StringProperty -> StringProperty: " + targetStringProperty.get());
  
  // this doesn't work either
          targetStringObjProperty = new SimpleObjectProperty<>("initialTargetText");
          member.setComment("initialSourceText");
          targetStringObjProperty.bind(Bindings.<String>select(b.memberProperty(), "comment"));
          member.setComment(expectedString);
          System.out.println("StringProperty -> ObjectProperty<String>: " + targetStringObjProperty.get());
      }
  
  }
  
  
  
  

  EDIT: Sorry for the horrible formatting. Can't seem to understand how to properly insert empty lines.

  Read the fine print in http://docs.oracle.com/javafx/2/api/javafx/beans/binding/Bindings.html#select(javafx.beans.value.ObservableValue, java.lang.String...)

  All classes and properties used in an affair of selection must be public.

  If you do your commentProperty, getProperty (and setProperty, although I suppose it doesn't matter) methods in public class has, it works as expected.

  Post edited by: James_D (link fixed javadoc)

• Tecra S1 - does not boot, black screen

  When I turn on my Tecra S1, fan starts, dvd starts up but screen stays black and hd light does not illuminate. If I press F8 or F12, or sometimes even if I do not support what it is, I've heard three beeps. I disconnected the battery, HD and RAM, but it seems that the same thing.

  What can I do to detect and debug the problem? Thank you

  Hey Buddy,

  I found and interesting article on the Web from Toshiba site:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  Overall this beep code means that a hardware malfunction has been detected. An ASP in your country can tell you what the problem is.

• Satellite M60-170 does not start - black screen

  I have toshiba M60-170, before it was perfect, but now I don't know what is happening?
  When I try to start my computer just for 2 sec, everything is good, then the fan of sounds of the CPU and the screen is black and the stop of HARD drive.
  So everything is stop!
  I try to start again but still does not.

  Some body told me that it is the motherboard!
  Please, someone tell me what is happens with my beautiful laptop?

  Thank you

  It does not sound good friend :(

  But let's try this; Remove the battery and unplug the power adapter for about 20 min.
  After this short period of time connect the two parts, and try to start Notepad.

  If it doesn t help the chances are that your hardware is defective. Like other guys said, it could be a fault of the motherboard or something different like CPU, memory modules.
  I can speculate on failure.

  I think that you don't have many choices. In your case, you should contact the ASP in your country for a control of the laptop.

  Good bye

• Satellite C855D-124 does not start - black screen

  Hello

  I have a problem on my PC (by Satellite C855D-124) specifically was playing a game, and stopped from nowhere I could not do any command then off button.

  But as I returned the call and turned the lights appeared as the charge appears as a small light and also appears on your but then nothing appeared on the monitor, no warning or error message...

  Then it connects but does not seem to do anything and I would like to know if you can help with advice on what happened and what I do or what I can do...

  Sorry for the mistakes but I do on google translator...

  Hello Adrian

  For me it is not easy to understand your problem, but what you can do right now is to restart your laptop and check if the basic operations are working properly. Try restarting several times to see what will happen.

  Start the laptop computer can see you Toshiba welcome screen?
  Is there a usual activity of HARD disk at startup?

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• M17x R1 does not start - black screen - fan turns, turns on the keyboard, nothing on the screen.

  Hi all

  Newbie here and desperate.

  I have a problem with M17x my son this morning. Everything worked very well and after some time, turned off the machine it self.  Now it does not start even - at least I think, it won't because there is nothing on the screen as it is empty.

  I've tried several things, including trying to move on and outside, with or without a battery of the power cord.

  I'm at a loss as to what could have happened.

  Help, please.

  Smakwam.

  The gpu of cooking is very easy in fact, that you have designated your oven to about 275 degrees cover a cookie sheet with paper and configure the map out of it by winding 4 balls of aluminum foil and their definition on each corner of the map. you never want to have it put all directly on the sheet. do Cook for about 10 minutes then cool before coming back into the laptop. Always be sure to remove all of the components and the radiator and any residue of thermal paste. After sick cooking you need to reapply a fresh thermal paste. I use artic silver 5. It is has more detailed instructions on this online, as well as photos. You want to make sure it's your video card before you do it just to be sure. I just had to do it again last week, works like a charm for me every time.

• Custom settings does not? Black screen!

  After doing windows updates and reboot my laptop, it allows me to connect, but instead to load my desktop screen, it turns just black. A small box will appear that says "custom settings (not answer) ' I'm lost. What is the problem and how to fix it?

  A small box will appear that says "custom settings (not answer).

  Interesting.   The part 'black screen' of your symptom could mean that explorer.exe has crashed and not able to restart.   I don't know why you might then see this second symptom, except that it sounds like something that could be a part of the explorer.exe recovery procedure, for example it reminds me of a procedure that automatically never came to be reviewed when W8 was first installed.

  In any case, even if you have a black screen, you can try to start the Task Manager and use it to start other things.   First of all, it would be useful to make a difference on the issue of whether you have a 'black' screen or a 'screen '.   For example if there is a fringe of light around the edges and it's just quite dark, but not as dark as it would be if turned off, screen "in white" could be a more accurate description.   Then you might be able to see things if they were added, which would be less likely, if she was black.   For example, you can move your mouse and see a pointer moves on the dark?   So I think this would be an example of a screen "empty."

  And then, to start the Task Manager press Ctrl + Alt + Del and the use of the Task Manager item in the menu hotkey to rise.   You can then use its Prcesses tab to see if the Windows Explorer appeared there.   If you can use the TM file, do not run... command to start typing here: explorer.exe

  However, another possibility that some people have been able to see is their primary screen inexplicably switched to a second monitor ghost.   Then pressing Win - P, CursorUp and Enter to try to change the setting of the Second screen can be a procedure simpler and more effective to try to get something on the monitor that you are watching.

  FYI

  Robert Aldwinckle
  ---

• Re: My new C50 of Satellite does not work / blue screen

  Hello

  My mother just bought a new computer. We began to set it up (hopefully, this is the correct English word) for the first time. The operating system has stopped working after a few minutes.
  I explain (I'm not very good at this ^^).

  I turned it on, the computer asked a few things like what color, we would like to be, give a name to the computer. And then he Laura to be connected to the internet. I tried to do, but it did not work.
  So now, I'm just a big blue screen and nothing I can do. I can't go back to the first step, and I can't move forward because there is nothing else than this big blus screen.

  Can someone help or not the slightest idea what should I do?

  Thank you for your help

  PS: English is not my mother tongue, sorry for the errors of language.

  Hello

  Is there a button NEXT to proceed to the next step in the implementation?

  Press the power button and hold the button until the phone switch. It again, and I hope that you will be able to continue the installation of Windows.
  What I always do is to finish the configuration without WLAN settings. Later, when Windows is configured and fully charged, I put WIFI password and everything is OK.

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.