Satellite L10-117: the fan stops and only run at full speed

Similar Questions

• Portege R500 - the fan runs at full speed during the recovery from sleep mode

  Hello

  The fan in my R500 works at full speed when he was in the system sleep.
  The only thing that helps is a reboot. :-/

  Is there a solution to this problem?

  Hello Allan

  I really wonder that you define this as a problem. From my point of view the problem is something else. You have a problem when you cannot boot up your laptop. You have a problem if you are unable to use certain features or if you can not open the DVD player. It is a problem.

  Back to your problem: have you tried to change the power settings, to change the method of cooling in the Toshiba power settings? Play a little with it. I optimized the use of my wholesale Satellite P200 and the fan operates at low speed. OK it is not the best example to compare the two models of laptops, but try it.

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• The fan stops after the Satellite U500 - 10Jwas turn

  Hello! I need help!

  The fan stops after turn backwards to laptop my laptop Toshiba gives me the warning "a problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  The fan works for several minutes and stops.

  I clean all the dust, I do not have anything with the hardware and software.
  What the reason for this?

  Hello

  What model of laptop do you have exactly?
  It looks like a cooling module problem for met.

  I think it needs to be replaced and this can be done by Toshiba service in your country.

• Often, the monitor stops, and the only way back is to make a forced reboot.

  Original title: Vista OS

  Often, the monitor stops, and the only way back is to make a forced reboot. This happens when my computer is turned on but not used. When I come back to the pc screen is completely out

  Hello joycita,

  It sounds like a problem of power options. Let's try the following.

  1. open Control Panel.

  2. click the Power Options icon.

  3. in power options, see the section "Preferred Plan". Yoiu should have a "balanced".

  4. click on the option "system settings change".

  5. in the change plan settings window, click the arrow to the right of the box next to the option "turn off the display.

  6. in the drop-down menu that appears, click the option 'never '.

  7. now click on the button "Save Changes".

  8. then close the change settings FRO windows plan

  9. now when your monitor remains inactive, your monitor should stay on.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Satellite A300 - fan always runs at full speed after full stop

  When I stop the Satellite A300, the fan always runs at full speed.

  Hello

  What? Cooling modules run, even in this case, the cell phone is off?
  Press the power button for at least 4 seconds, then the laptop must be turned off.
  Disconnect the power adapter and remove the battery
  Wait about an hour and reconnect the battery and AC adapter
  Then switch on the device after a certain time of use of turning the unit off and check if the cooling modules would stop too

• Satellite L650 1NC - the fan noise

  I bought the laptop in February 2011 and the fan noise deteriorated over time, now. I've read many threads in this forum and elsewhere about this problem and I think that the problems are basically the same.

  Now that I've read some that messages stating that the new BIOS, released in September have apparently solved the problem, I did a BIOS update (Version 2.3) to meet the same problem again.

  The fan stops when the temperature is below a certain threshold, in my case according to CoreTemp it seems to be at about 50-55 ° C. At the moment the fan turns off, which is also confirmed by the monitor of health indicating the 0% fan speed.
  This leads to the CPU temperature increases until the fan is used to about 55-60% fanspeed.
  This process repeats every 15-20 seconds and is very annoying.

  It gets worse, but if I start to actually do something like a request to open from the web browser - nothing serious, really, I don't want to start even complain about the noise while game/watch movies.
  The fan speed will be 70-75% as soon as the CPU gets the work to be done.
  The noise that results is unacceptable for 20-30 seconds.

  Noise is an important factor for me. At the University I can't use it as my fellow students are too distracted by its noise. To work my colleagues began to complain as well.
  As I use my cell phone while being out of my own office/home it is basically useless for me now.

  Has anyone else still issues after the recent updates to the BIOS?
  Is there a way to put the fan always runs at around 30-40%?

  All opinions are appreciated.

  Hello

  Cooling module performance depend on the internal temperature.
  If the temperature arise at a higher level, the fan must turn more quickly to prevent equipment overheating it's usual behavior.

  But you can try to change some Windows 7 power management settings.
  This will reduce the performance of the CPU and the dissipation of the heat and that should slow down the activity of the fan too.

  Here is instruction how to change the Windows 7 power management.
  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  TOSHIBA Power Saver Settings options are interesting: cooling method and processor power management

• In fact, I have problem in adding music to be played across all folios, the problem happened when I simply lock the ipad and open it, the publication is always open and I can browse, but the music stops and cann't continue. How can I solve this t

  In fact, I have problem in adding music to be played across all folios, the problem happened when I simply lock the ipad and open it, the publication is always open and I can browse, but the music stops and cann't continue. How can I solve this problem to continue after the opening of the ipad and continue to navigate the digital publication.

  The background sound plays only if the application is open. Once the device is locked or the user switches to another application the audio will stop.

• How to change the power settings to activate the fan stops during the day before.

  Since my computer has turned off the fan in the standby mode.  Suddenly, after having entered the day before, the fan continues to run.

  Where can I set the power standby mode, so that the fan stops?

  You mention not likely this fan, case fan? That would be controlled by the drivers from your mobo, obtained from your mobo site

• screen flickers and the game stops, and table appears all playing the cfs3 game

  Original title: cfs3 crashes to the desktop

  Hi, a friend gave me used fcs3. It installed fine, everything works fine, but after 30 to 60 minutes, the screen flickers and the game stops, and my table is displayed. I get no error message at all and I went topics in microsoft help for cfs3 specific website if overwrite problems cfs3, which there was a huge page full of symptoms and types of accident etc but since I got no error message number refer to I have read the whole search'm thiing and the causes and resolutions , but found nothing there.

  I tried to restart and the program should run for a while then crash and return to the table.

  I tried uninstalling and reinstalling, but I got the same results.

  HP a6110n

  AMD Athlon 64 x 2 Dual Core processor 4400 + 2.30 GHz

  RAM = 4.00 GB

  32-bit operating system

  Note Windows experience 4.9

  80% of my disk space is available.

  Also the power supply 450w

  Map of Envidea 8600

  Whole body there suggestions?

  Thank you, Ed S.

  Hi P.K.

  The information and links have been informative and educational and I'll save that for a later use. However, the graphics card was the problem (I discovered) so I'm upgrading and also I move FSX on my new pc (a pc gamer VELOCITY) and it works perfectly. Thanks again for your contribution.

• Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

  I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

  Hello

  1. the updates you downloaded?

  2 a successful installation of updates?

   

  Follow these methods and check

   

  Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
  Renaming or removing the pending.xml file booting from the Windows Vista disc.
  a. Insert the installation disc.
  b. restart your computer.
  c.Press any key to load the disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
  d. choose your language settings, and then click Next.
  e. in the System Recovery Options menu, click command prompt
  f. at a command prompt, type the following command below and press ENTER
  CD C:\windows\winsxs

  g. now, type ren pending.xml pending.old , and then press ENTER.
  Restart the computer and check.
   
   
  Method 2:  Once you are able to boot to the desktop, follow this method.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
   
   
  Thank you

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)

• I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: "Microsoft C++ R pa

  I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: payload "Microsoft C++ Redistributation Pack 2010 (Code output: 34)." Can someone help me please?

  See link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• "Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud "."    Then on the new facility to download. the process stops and repeats this message...

  I get the error message ' Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud '.    Then on the new facility to download. the process stops and repeats this message...

  

  Hi Jory,

  Run the first CC cleaning tool to remove Adobe Creative cloud completely from your machine.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Once it is completely removed, you can download the installer from the help below document:

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Kind regards

  Sheena

• APEX 4.2 by aligning the number of the point Stop and Start Grid Layout

  My APEX application is moving from 4.0 to 4.2.  I have a problem with alignment (justified left margin) of Stop and Start Grid Layout of items that have a border around them.  Earlier, I had a problem with the border itself not appearing is not in the application of 4.2.  I managed to solve that with a workaround by adding inline code in the CSS of the page section: #P23_OFFICE_START_TBL {width: 682; border: 1px solid #369; margin: 5px;}. This has created the border I needed, but there are 2 Stop and Start Grid Layout products that are indented and not in line with the previous line border.  I tried a number of different things, but none of them have worked.  This seems to be a very simple matter to fix, but I'm having a difficult time.

  I tried to put the item in a different grid, which corrected the indentation, but then I lost the border around the element.  It seems that the CSS code above does not work on the new grid.  I also tried to set attributes such as margin-left: 5px; float: left; Clear: left; float: left in the CSS code, but that didn't work, too.

  Any suggestions?

  Thank you

  Ajay K

  I deleted and added the points Stop and Start Grid Layout not lining up properly.  It worked.  Apparently, the upgrade from 4.0 to 4.2 did not handle/convert these elements correctly.  Deleting and adding their backs has solved the problem.