Satellite L100-P443 - GPU not recognized correctly (950 945GM)

Similar Questions

• New HDD on Satellite Pro L10 is not recognized correctly

  Hello

  I changed my old hard drive (60 GB) with one of 160 GB, but my laptop does not recognize this size. It gives me only 127 GB. I updated my BIOS and update Windows XP SP3 home edition
  I also tried with partition magic. The curious thing is that sometimes, it happens that partition magic sees the 160 GB, I can extend the size of 127 to 160 GB and I can create an additional partition (drive D) of say 40GB.

  When I copy data from this partition I get an error and stops just my laptop.
  After the restart, he says that he cannot find an operating system.

  Can someone help me please?
  Thank you

  Hello

  I'm afraid there is not much to do. Entire HARD disk capacity knows correctly or you must accept that the BIOS can't handle with this HARD drive. This model of laptop is almost 4 years and I can imagine that there is a limitation in the BIOS.

  Maybe you should be happy with 120 GB of HARD drive. And the 160 GB one, you can use as external HARD drive.

  One more thing: have you noticed any functionality problems after installing SP3?

• Satellite Pro 6050: DVD player is not recognized correctly

  The guide shows the Toshiba SD-R2102 as one of the internal drives for machine of HRT (supplied with the CD-ROM). So I bought one. Running XP and when I install the hardware is not recognized at boot, or in Device Manager. Looked at the site to support my BIOS is the last and can find no driver there or on my tools disk.

  Can someone point me in the right direction?

  Hello

  As far as I know your device has a Slim select Bay. If the drive is not in a good position and there is no proper contact of the reader doesn t exist for the system. Please check if the disc is in the correct position. If you put it inside at the end to do a click. After that, the reader is correctly positioned.

  Good bye

• DVD player is not recognized correctly - Equium L100

  Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager
  
  Seriously frustrated.

  Hello

  Please try this http://support.microsoft.com/kb/314060/en-us

  Is the DVD drive in the device with the yellow exclamation point Manager?

• Satellite M70: HARD drive not recognized external - various XP error messages

  Hi all

  I have a Satellite M70 and I have a Western Digital external hard drive.
  Initially, it worked great, I was able to put my large collection of music, etc. on it and run a computer off to save space on my integrated HD.

  But recently I had problems with XP not recognizing HD or be able to write in it. It appears in my computer, then disappear, often randomly when I write new files to it.
  I reformatted the hard drive to NTFS as it ran originally as FAT32.

  I updated my BIOS as well, but I'm out of ideas.

  Anyone else had similar problems with XP?

  Thank you

  Will be

  Have you thought about external HARD drive failure?
  Perhaps failure of HARD drive and, therefore, it cannot be recognized correctly.

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• Satellite L100 - graphics card not found on Windows 7

  Hello

  I have a laptop model L100 and I loaded win 7 ultimate. I have a problem win7 automatically finds the drivers for all the parts, but only the graphics card is not found.

  How I can load it or how can I fix this problem?

  Hello!

  What Satellite L100 you have exactly or what graphics card does it?

  In your case I would visit the Toshiba European page and search your Satellite L100 driver download list. There you can download the display driver for Windows Vista. The Vista drivers are also work on Windows 7.

  Check this box!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite U400-119 - battery not recognized

  Hello

  I just bought a laptop TOSHIBA Satellite U400-119. The operating system is Windows Vista Home basic.
  Before I turned on the laptop, I plugged on the CC adapter and let the batteries reload for 24 hours.

  However, after 24 hours, battery LED icon is orange and blinks (which means that the battery is low according to the user manual).
  When I tried to turn on the laptop without the adapter DC laptop computer did not respond. So I installed Vista while the laptop was still connected to the DC adapter.

  After installation, the Vista battery icon displays a red cross on the battery icon, which means that it is not recognized.
  This is a brand new laptop so I think the battery needs to be replaced, but I don't know.

  Someone at - it had a similar problem?
  Any sollutions to my problem?

  Thanks in advance!

  A display really interesting because one of my friends got the laptop U400 and a similar one issued what s happened too.
  Suddenly, the battery did not recognize I thought that it s a malfunction of the battery. But I was wrong.

  The solution is very easy.
  You must update the BIOS and this should help get rid you of this strange issue.
  My friend did the same thing and it worked!

  So check it out. Download the BIOS compatible and right and update!

  Good bye

• Satellite A355-S6925 - SDHC not recognized

  My Toshiba Satellite A355-S6925 does not recognize a Lexar Platinum II 32 GB SDHC card class 4.

  My last hard drive crashed and I replaced with a new one and installed Windows 7 from scratch.

  Am I missing a driver or firmware to use the built in reader SDHC?

  Please help, I just bought a camcorder and I want to transfer video.

  Hi michael_fuglas,

  > My Toshiba Satellite A355-S6925 does not recognize a Lexar Platinum II 32 GB SDHC card class 4.
  Hmm, I think that the card isn't recognized due the high capacity of 32 GB. As much I know 32 GB cards are not supported for all card readers

  In your case, I would try a smaller size such as 4 GB or 8 GB. Generally these cards should always work.

  Check this box!

• Satellite A200 - hard drive not recognized

  Hello. Deploy a satellite A200.

  Original problem would not initialize only power light and hard drive light came on a second, nothing on the screen, not access to the parameters of F2. Reinstall memory, no go, deleted the test and drive hard and read disc hard ok in an external enclosure. With disk hard deleted computer will start after market boot disk and running program diagnosis ok. Can now access the settings of F2.

  Format external hard drive, reinstall and start with the startup disk, hard disk appears in the bios, the test runs diagnostic ok.
  Tried to install Windows XP and XP pro and windows twice starts to install and then comes up with an error saying there is no hard drive present, even if the Bios and a diagnostic boot disk at the same time recognize the hard drive.
  Tried another hard drive with the same problem, not recognized.

  Any ideas?

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Normally with this record everything should work fine because it s pre-tested and specifically designed for your laptop.
  Check this box!

  In the worst cases, your HARD drive is faulty and you need a new. The HARD drive seems to have random failures.

• Satellite L100 113 does not start after upgrading memory

  Hello.

  Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

  I read manual - this laptop supports 533 PC4200 memory modules.

  But SO-DIMM 533 MHz will be delivered in one month...

  The memory modules, we can install to Toshiba L100-113?

  Thank you.

  Hello

  I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

  Please visit this memory 3rd party:

  [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

  As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Concerning

• DVD on Satellite 1800 movies are not read correctly

  I bought a Satellite 1800. One with processor Intel 1.1 ghz, 256 MB ram and 20 GB HARD drive.

  The DVD drive seems to work fine, but not with DVD movies. I tried various movie playing software, and each of them are not played correctly in the graphics and sounds. For me, it looks like a problem with the graphics display power rather than drive. If this machine must be able to play movies with standard charts, etc.?

  Thank you.

  Hello

  Firstly: have you installed the LATEST drivers offered on the download Drivers Toshiba site? Must check out and make updates if not already done. The other thing is: you have tried different players and they didn t give you the you´ve of quality of reading expected.

  So now try THIS player: www.videolan.org

  VLC player wins the best out of your equipment of machines even if you´ve had an older system. I played movies Divx and DVD on pentium 3 and pentium 2 machines, so your machine should theoretically able to do.

  Welcome them

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• Satellite A10: LCD does not display correctly

  One of my users has an A10 with a screen problem. The LCD screen is not displayed correctly. You can only see the things on the screen, but they are very very low, essentially unusable. I hooked to an external monitor, which works very well! If someone has had this problem, and if so what was the solution. I incerased brightness etc, but to no avail. Am I missing something very basic?

  Hi Patrick,

  It seems that your FL inverter has failed. It is a component material that offers the backlight to your screen.

  Typical symptoms of failure are that the screen will be visible, but only just, while an external monitor works perfectly.

  I suggest that you only contact a Toshiba authorized service center.

  HTH

  [Edited by: admin]

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.