Satellite L30 cannot recover

Similar Questions

• Satellite L30: Cannot change my desktop wallpaper

  Hello

  I am a user of Satellite L30. When I want to change the wallpaper, I get a message "this feature has been disabled - please contact your system administrator.

  Can someone help me please?

  The message says it all.
  This setting is disabled by an administrator. I suppose that you, a part of the domain in the network, and the administrator has disabled this setting.

• ODD on Satellite L30 cannot read anything

  I have problems with my CD/DVD drive, it will not play anything on Satellite L30 - 10V.

  I checked the drivers to see if it works, he says he is and made a diagnosis that says that it does not.

  Any help appreciated :)

  Can you please explain a little better the State ODD on your laptop?
  Is the drive listed in Device Manager or in Windows Explorer?

  Is an application like Nero preinstalled?
  Remove the drive from Device Manager, reboot your computer and check the functionality.

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.

• Satellite A10: Cannot recover system with recovery CD

  Hej everyone!

  I was struggling with a strange problem lately, I can not understand yet, so if anyone has any ideas so pls...

  I have 2 laptops Satellite A10. I lost the CD of recovery to one of them, so when I tried to reinstall the laptop I decided to use the other one recovery CD to do that because they are the same... at least I thought they were...

  I repartitioned the laptop with fdisk and made the partition active, formatted and then when I boot with the recovery CD, it began, began to dump files, but about 20%, he just say 'impossible recovery' or something "partition is not active" and restart. When I rebooted, it saw that the format of the C partition was gone (he said unformated or damaged partition).

  Now, I tried 1 partition, 2 partitions, FAT32 and NTFS, no joy... I think you must have some special configuration of partitions to ensure the success of the recovery, but I don't know how.

  I have not tried to reinstall the other laptop with the recovery CD because I'm afraid that it's too bad...
  Can someone help me pls?
  BR
  / Linus

  Hello Linus

  Before you begin the recovery procedure, it can't do anything. Simply start the recovery procedure. I don't really know why the recovery procedure stops after 20%, but please do not prepare HARD drive before using the recovery procedure delivered.

  If I remember well you have two options before the start of the recovery procedure: standard and expert mode. If you use the standard mode is wiped the entire HARD drive and recovery image will create a partition (the whole HARD disk capacity). Using expert mode you can create a clean partition and later in management of the disks (under WXP) create the second logical partition.

  Please try both options. If the recovery CD is not damaged I really don't see any reason why the recovery procedure can be done successfully.

• Satellite L30: Cannot install the software modem Speedtouch 330 on Vista St

  I have a new L30 with Vista and and want to use my st330 Speedtouch modem. I loaded the new Vista of Thompsom the st330 compatible software but the installation does not complete and I can't connect to my broadband provider.

  The st330 works perfectly on my old computer xp with no connection problems.
  Any advice would be much appreciated.

  Rob.

  Seems speedtouch 330 St the modem software is not fully compatible with Vista.
  I put t know why you post this question here in the forum of Toshiba.
  This has certainly nothing to do with you laptop.

  In my opinion, you should contact the guys from support of the modem speedtouch 330 St and clarify this issue.

• Satellite L30: Cannot change video memory in Vista?

  tried to change the size of the video memory and can not find the option in vista?
  updated drivers but still no use.he driver uses the ati catalyst thingy.help

  Try a different display of the L30 series driver. I PSL33 L30-134 and the use of XP, but I use the L30 PSL30 display driver, because this driver has the ability to change the size of the video memory (this option is missing PSL33 driver). I use not yet Vista, but maybe you should try another driver display L30 (for example the PSL30 L30-134).

• Satellite L30 cannot connect to the unsecured network

  I am owner of a hotspot (unsecured) and some of my clients with Toshiba L 30 and Vista unable to connect to the network. I tried with:
  1 Dlink DWL-G700AP unsecured with card's internal network Toshiba Atheros ar5005g - no connection
  2 Dlink DWL-G700AP secure USB Asus WL 167 G adapter Wlan (Atheros disabled) - no connection
  3 canyon CN-PRE unsecured with card's internal network Toshiba Atheros ar5005g - no connection
  4 canyon CN-WF514 AP + router WPA - PSK with card's internal network Toshiba Atheros ar5005g - connection OK

  I can see a MAC address of the 30 L in the Dlink AP, tried to give an IP address manually but no luck!
  When I try to connect to the hotspot of the response of no connection is so fast that I think that the problem is another somwhere.
  My Tecra A8 and many other computers running smoothly on the hotspot.
  Any suggestions wellcome

  Hello

  Can connect you to your home Wlan?

  Vista OS supports a new network security features and I guess the wrong settings are responsible for this problem.
  You need to inspect a little.

  I put t know if you have enough experience Vista to do this, but I found this page useful. Check:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

• Satellite L30-113 - cannot burn CDs or DVDs

  I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

  Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

  I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
  I have no idea on how to fix this unit "corrupted".

  Hi mate,

  I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

  After that, I again was able to burn DVDs.

  In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

• How to recover the Satellite L30-140 - I lost the recovery disk

  Hello

  I have a Satellite L30-140 and I want to recover the windows on that.
  I lost the dvd recovery-. -.
  Is there a method to recover? as acers Alt + f10 recover menu?

  Thanks for your help :)

  Hello

  You need the recovery disc, either the clean Microsoft Windows disk in order to install the operating system gain.
  L30 being a little older, I doubt that you can order the recovery disk
  That's why you need a Microsoft Windows CD!
  You will need to buy this CD if you are not the owner of the Microsoft Windows CD.

  Welcome them

• Re: How to recover the Satellite L30-10s?

  How can - I make my satellite L30-10 s to exit the restore box settings?

  Hello

  I think that HDD recovery isn't possible since this is a very old notebook and I guess for this series, HARD drive recovery were not available.

  So you have only one option to retrieve the computer laptop back to factory settings: you need the recovery disc.
  If you n t have this disk, you will not be able to put the computer laptop back to factory settings. I think that its no longer possible to order the recovery disk because of the age of the laptop.

  So what to do?
  You can use only a clean installation of Microsoft disk in order to install the system.
  The essential drivers or tolls are available on the page of the Toshiba UE driver.

• Cannot change the size of the video memory in Satellite L30-113

  I have a Satellite l30-113 which has 1 GB memory and windows Vista.

  The size of memory that has been attributed to the vga is 319 MB.
  How can I decrease the video memory?

  Hello

  do you really mean 319MB? This machine only supports a maximum video memory 256 MB shared memory. So if you might have 32 MB (which is how I imagine rather memory assigned to your VGA) you can increase the video memory of this machine by changing the value of memory assigned in the bios of your machine.

  Do you know how to enter the bios?

  Welcome them

• Cannot open help and Support on Satellite L30

  I have a new Satellite L30, but can't access MS Help and support on the start menu. He did something in that hard drive active and so on but no help and support screen comes up. I'm sure it was there a few days of ideas?

  Hello

  How about using the System Restore tool?
  If the option help & support has worked a few days ago, so I think he should be able to roll back the BONE until the beginning.
  I think this procedure should help.

  But try to use this path in the immediate window:
  %Windir%\PCHealth\HelpCtr\Binaries\HelpCtr.exe

  For more information, please see this page:
  http://WindowsXP.MVPs.org/startmenuhelp.htm

• Satellite L30-11 - cannot start with drive HARD 750 GB (Sata II)

  Hello world

  I want to move to the size of the HARD drive in my laptop satellite L30-11th 120 GB at 750go (seagate momentum).

  I mist update BIOS firmware to the latest version (on the Toshiba site: V 3.1).
  When I start a press the F2 key at the same time, I can access the BIOS that shows the HARD drive. However, when I try to go further and to boot on the Windows 7 installation disc, nothing happens (although it does not start when I put the original 120 GB HDD).

  I have another (also Sata II) 320 GB HARD drive that works well.
  So, it doesn't seem to be a problem of Sata, but more a question of size?
  Any idea what it could be?
  If it's a question of size, how I can fix my pb?

  Thank you very much in advance for any help that you could give me

  Re

  Jérôme

  In my view, there is compatibility problem. Maybe you should not go over Board with upgrade of the HARD drive.

  Buy a HARD drive with a reasonable capacity. 400GO not enough for you?

• Satellite L30-113 cannot start Windows OS

  After downloading upgrades my computer does not start at the top. My computer screen shows a black screen, red, writing in the middle. He then goes to the screen, then go to windows error recovery page when you press on enter too lance beginning repair it then repeats the process and also switches its self off when you press start windows normally. I can't find the boot disks, the laptop is a Satellite L30 - 113 series.

  Mary Anne.

  Hello

  I had a similar problem on my computer but was able to fix it.
  I took my CD of Win XP and started the repair console.

  Then I used the command Chkdsk and scanned and repair files and sectors on the HARD disk.
  Then I used the Fixboot command. He writes a new boot sector on the system partition.
  Finally used Fixmbr command that repairs the boot partition's master boot code.

  Check out this page of MS:

  [How to install and use the Recovery Console in Windows XP | http://support.microsoft.com/kb/307654]

  Good bye