Maximum colors on Tecra A4

Similar Questions

• Cannot use the maximum color in the document CMYK values - what's the problem?

  I can't put all the colors in my document at maximum saturation (i.e., the value of 100) and brightness. What is a CMYK thing, I never noticed before?

  If I physically just move the sliders up to 100, then the color of my selected object does not change. When I leave the color window and enter it again, the values have themselves changed to something in the range of 65-85.

  Tried a new document and tried Pshop preferences without change in compensation. Everything works very well in a RGB doc.

  I'd like to help! Thank you!

  CMYK may show only the yellow, magenta and saturated cyans.

  It cannot reproduce saturated red, green or blue.

  TSL values compared to the RGB.

  LAB values would be of same clip in CMYK mode, because they can be well outside the range of CMYK.

  Yes, I suspect you missed just as before.

• Support for the maximum RAM, the Tecra A11

  Hey the Toshiba Experts,

  If I buy a Toshiba Tecra A11 PTSE1A - 07G 005, model and on the site it says it's only 8 GB expandable. I wonder with a flash BIOS or the firmware update, if it could support 16GB?

  Possible or impossible?

  Is not possible. It does not depend on the version of the BIOS, and the BIOS update will not change anything.

• Tecra S3 - 153 Maximum capacity of HARD drive replacement

  I want to install a new HARD drive with a higher capacity, but I can't find any information on the maximum capacity of replacement of hard drives.

  Does anyone know hwo to find that info or what would be the maximum capacity for TECRA S3-153 PTS30E-0TD03S?

  Hello

  Tecra S3-153 supports the SATA controller.
  As far as I know that the SATA controller is not limited, so, theoretically, you should be able to use HARD drive sizes 2.5 SATA; 250 GB and more

• Help: TECRA 8000 Memory slot B mailfunction

  Hello
  I have a Tecra 8000 for 5 years.

  Now slot memory B seems to be no longer works:
  If it is filled, the computer does not start (are turned on, but no activity, even no toshiba logo screen)
  If it is empty, the computer starts OK with 128 MB in the slot A

  Issues related to the:
  1. is it possible to repair this and what should I check first?
  2. According to the specification, maximum memory for tecra 8000 is 256 MB. Is it possible to insert all the stack memory of 256 MB in the slot and leave the slot empty B?

  Thank you
  Michael.

  Hi Michael,

  In my opinion the slot B is defective. You're right about the capacity of RAM. Maximum memory is 256 MB of RAM. It is tested with 256 MB of RAM but apparent with both parts of memory because I have found no extension of memory 256 MB for Tecra 8000.

  It is possible that it works properly, but you must try it on your own risk. To play that's for sure, you need to connect a Toshiba Service partner!

  Good luck

• printer is, BUT only with black and blue, all other diagnoses print with all colors

  Initially, the installation of the printer REFUSED to align, took 7 attempts (OK, I've heard of Einstein quote!). Whenever I used the printer to ALIGNER PRINTER screen - the process has failed. So I looked on the web, and:

  Clean the cartridges,

  Erased the vents

  Removed and cleaned the print head

  Prayed

  Tried again

  To nothing not done, so I tried to make the diagnosis via PC software and here deepened the mystery.

  When the HP Photosmart B210 series Toolbox running I got three different results between the three print options

  A Diagnostics Page of print quality gave me five Ba's maximum color printing

  Align the print heads gave me the black and blue boxes/lies/grids and the message alignment successful

  The print Diagnostic information gave me all four colors with a lot of useful info, including the print head 73 calibration trust level: 0

  Ideas anyone, before I bin it and buy a Kodak or disgusted Epson

  What exactly is the problem?  Alignment aligns the print head color to the black print head, and black and one color (cyan for your printer) are required for this.  (There is probably an extra set of blocks that prints gray blocks fade to white.  This section is used to calibrate the energy for the colors).  The other test pages that you printed will be print various diagnoses or test pages that will use all colors.

  A successful alignment page requires the page be printed on white paper not used and requires that the cyan and black sections print correctly.

• load preset tracingoptions presetname applescript

  Howdy,

  I looked and have searched and searched and searched and cannot find any example code showing how load or create a tracingoptions object to define how a placed image is traced via AppleScript.

  I can draw a picture using the preset default value (which is more or less useless for me). I have been more documentation (both the dictionary of AppleScript to Illustrator and the AppleScript Guide Adobe) without lights jump over my head.

  Any help much appreciated.

  OK, here's something which can help you get started. When you trace a set point the result is a plugin object. This plugin object is an object of follow-up that has in turn options object tracing with properties that can be defined as anything else. It's just nested a level or two deeper. I have to admit that I did not find documentation on this very good and he did take some time for me to get my head around what was going on. You'd probably want to wrap the trace command in a try block, just in case you are passing something that may be too complex to draw.

  Tell application "Adobe Illustrator"

  activate

  the value Doc_Ref to the active document

  say Doc_Ref

  the value This_Image to the first recorded point

  the value This_Trace to trace placed This_Image

  the value properties of tracing options of tracing of This_Trace to ¬

  {corner angle: 90, fillings: true, exit live painting: false, maximum color: 20, weight: maximum stroke: 2, minimum area: 4, stroke length: 40, output color chart: true, path fitting: 0, preprocess blur: 0, resample resolution: 72, stroke: false, trace for mode mode: color followed}

  the value This_Group to extend your tracing to reconstruct the history of This_Trace

  end say

  end say

• Composition in AE vs Pr Pro & economy settings as preset QT movie

  Hello

  I'm on a Mac using CS4

  I use Premiere Pro and in it there are many presets for specific project.   I use the XDCAM presets for XDCAM EX1 pictures.

  In the Composition AE preset, there is not a predefined as in RP Pro XDCAM.

  I think I'm going to answer my own question.

  I guess I copy the preset values Pro Pr and create an EA is predefined in custom for XDCAM EX clips

  It is better to create a composition, the exact size of the clips or should I do the composition width and height a bit smaller, (and to reduce the scale of the clamp if necessary), just in case I want to Pan the image around.  Also if I made the smaller composition size how would that affect with an undesirable Pr Pro model event?

  Last thing, if you make it out of AE to use Pr Pro, I read that it was better to choose Animation as the preset for maximum color and make a Quick time video, if I have more editing or effects to apply to the Pr Pro, not H. 264, he corrected that.

  Thank you

  Cree

  Cris:

  The reason why it is not a specific XDCAM predefined in AE is, because unlike editing applications, After Effects does not use a particular codec for video processing. Treated AE always internally in a uncompressed space. So, if you leave the specific codec of the equation, the XDCAM format is the HDTV standard presets, depending on size of image (720 vs 1080) and frequency of images you use.

  H264 is a codec for broadcast and distribution. It is not really intended to be used as a format for exchange between applications. QuickTime animation is very nice, as well as a few others.

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• You cannot change the color display on Tecra 8100

  I have a 8100 TECRA with Windows 2000 Professional installed. I tried to install "Streets and Trips" and it won't work without colorful. I can't change the view setting because it doesn't have this option (high resolution). Is there a driver available to fix this problem?

  Don

  I found on the Toshiba page two graphic drivers for W2k on the Tecra 8100.
  Just install the graphics driver and the option should be available

• Tecra A7-112 of display cannot display all the colors corectly

  Hi, I have the same problem with my screen than that of this post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14718&messageID=54000

  It seems that my screen may not display all colors corectly and it seems protected by a kind of tasks/works of art in most colors.
  Here is a picture, not so good but still, my question:

  http://www.Logicode.ro/test.jpg
  http://www.Logicode.ro/Test1.jpg

  You can see the first color - pure red it seems correct and solid but second it - a small red varation there artifacts / protected by a kind of tasks.

  I learned that it is a problem of dithering that can be set in the BIOS.

  For the Satellite A100-237 the problem has been resolved by downgrading to an older version of bios, but what can I do with my laptop Tecra A7-112? :|

  Post edited by: eStatic

  Hello

  Have you checked whether the BIOS most recent update has been published on the driver page?
  I put t know if it helps but you can also try to update the display driver.

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Memory Maximum Tecra 8000

  It's one of these issues "can I extend my old laptop a little further.

  I have a Tecra 8000. He has 256 MB of memory in a single module of memory in one of the two memory slots. There is a free slot.

  Can I put another (probably 256 MB) memory module in the other slot to give me a total of 512 MB?

  I have a downloaded product specification that says that 256 MB is the maximum, but it is dated April 2000 and it is unclear if this is a fundamental limitation product or just the maximum that Toshiba would supply in 2000. I also met some PC where these kinds of limitations have been increased by subsequent versions of BIOS.

  The laptop has the current BIOS (Version 9.3) installed.

  Hello

  Well, as far as I know this device supports max 256 MB SDRAM (2x128MB).
  Moreover, I found these compatible modules.
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  To my knowledge it of not possible to put another module into the slots, because it is a specification of the motherboard.
  By hand, I found a cool site with Tecra 8000 pieces. Visit this link:

  http://www.westworldcomputers.com/toshiba_8000_parts.htm

  Good bye

• Tecra A4: I need the LCD display ICC profile color

  Hello

  I have a Tecra A4-SP619 and I need the color of ICC profile for the LCD.

  Please, could you help get it?

  Thanks in advance.
  Sergio

  Hello

  I put t know why you need this profile, but to my knowledge you n t need this option to use the laptop properly.
  The Windows operating system and the graphics driver choose the right color management. You n t need to install anything.
  But still, in my opinion this information you will find in the manual of the user of this laptop.

• Maximum hard disk on Tecra M4

  I have a Tecra M4, and I think to upgrade the hard drive to a SATA 320 one. Y at - it a maximum size of hard drive for this model? Also the functions of "Safe custody" of HD will still work if you install a new?

  Thank you
  Mark

  Hello

  There is certainly a point HARD drive size limitation is that the BIOS supports not all HARD drive sizes, and to be honest think I don t think the 320 GB HARD drive would go.
  I think it s all just too big

  Unfortunately, Toshiba doesn't provide details about the possible HARD drive s max
  But I think that a 120 GB HDD should t be a problem