Satellite L30 PSL33E: No sound after downgrade to XP

Similar Questions

• Satellite L30-113 - no sound after the downgrade from Vista to XP

  Hello to everyone.
  I recently bought a new laptop Toshiba Satellite L30-113
  with vista preintalled.

  As many users around the vista of the world seemed very slow for me so I decided to go back to Windows XP Pro.
  The problem is that I can't hear any sound in my laptop.
  In fact I found some drivers for Realtek controller High definition audio
  but they have nothing did.

  I give the floor to toshiba in Greece and they told me that this laptop is designed only for windows vista!
  Can this be true?
  Help, please

  Hello

  In my eyes, you have misunderstood something. Of course, that the laptop can handle Windows XP and it should work correctly, but as you say the device was shipped with Vista and so the guys at Toshiba support don't provide any support for WinXP on this laptop.

  As far as I know page driver Toshiba also provide drivers for win XP. Therefore, visit European driver of Toshiba page and choose the good laptop-> PSL33 Sat L30-113

  You will find a driver 5.10.0.5273 version XP. This should work!

  Have a nice day ;)

• Satellite Pro U400 - no sound after downgrading for Win XP

  Hello

  I hope someone can help!

  Have just downgraded from Vista to XP pro U400, downloaded all the drivers I could get on the Toshiba site but I still have PCI Device and unknown device drivers are not installed for.

  Think it must have something to do with the sound when I tried to load sound divers, he came up with "cannot find media device" If don't have her no more, anyway don't know what to do next.

  Thank you for the charges

  Hello

  This theme has been discussed here many times.
  It s a general problem with Windows XP!
  If you n t install the patches MS as KB888111, KB835221 and then you would not get the sound.

  You must install these cites patched before install you the audio driver!

  If the driver has been installed you must remove it first before the patches are installed.

  PS: This MS patches are part of the SP3 too!

• Satellite L30 PSL33E: After downgrading to XP DVD-RAM does not burn

  My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
  But now my DVD-RAM does not burn!

  Install the driver DVD - RAM Toshiba v the European driver Toshiba page 5.0.2.5

• Satellite L30 PSL33E - wifi is not working after installing XP

  Satellite L30 PSL33E downgraded from Vista to XP. Everything works apart from the Wifi. Device Manager displays Atheros ar5005g card with yellow exclamation point.

  I tried the driver from this site, but windows does not load the driver as it is not signed.
  I try to reload the driver and the laptop freezes.

  I'm probably something wrong. If advice... soon

  Hello

  First you need to update the Win XP to the last State.
  Very important are the SP2 and al MS patches and fixes after the release of SP2.

  The European Toshiba WLan driver page provides a new Atheros WLan driver which is compatible with the Windows operating system. XP and Vista.
  Check this box:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  First remove (uninstall) installed WLan driver and then install the new driver Atheros WLan downloaded.

  See you soon

• Satellite L30 (PSL33E) - sometimes freezes

  Hello

  I'm in big trouble with Windows XP pro SP3 & my Satellite l30 (psl33e).

  I removed vista to install Windows XP with an original CD of XP SP3. So I formatted hard drive and begin the typical installation. Problems start when installing: the computer crashes sometimes, something like 10-20 min. Finally install completes, but computer is still really slow.

  I have installed all the drivers from the Toshiba site, restart the computer between each installation. The restart time is like 10 min and sometimes driver install hangs also. After 3 hours, I was able to connect to the internet, so I've spent on the Windows Update site; Here, I've installed all the updates, but I still had the same problem, sometimes computer freezes for 10 to 30 minutes. When the computer crashes, you will see the hard drive light.

  When I start Windows boot time is long enough for a new installation, something like 5 min. The sound icon appears 15 minutes after office expenses with the LAN & wan icons minimum 30 min after. Network works well as soon the configfree icon appear (and therefore of office). I can't run HWsetup, but PC diagnostic tools don't report made by any problem with the hardware.

  I tried to check the drivers with a pilot online checking tool (ma - config.com), they were all aware, idon't have a problem in the hardware Manager. Windows is up to date.

  I checked memory with memtest, still no problem. I have updated BIOS, no change. My hard drive has been freshly fully formatted, so I don't think that's the problem. I even tried to reinstall Windows, still the same problem during installation and after. the original CD, I used to install Windows is not clean, no scratches and works perfectly on my other computers.

  I did not have this problem with Vista, but I really do not want to use, 1 GB of memory is too low. Everything is good, drivers, Windows, programs, hardware, but computer still hangs when it wants to.

  So I absolutely do not know what to do, I'm looking on google for 2 days without response. I think it's a cause of problem of Windows questions begin during installation.

  I would really apreciate help someone. Thanks in advance & sorry for my bad English,

  Pedro

  Hey Buddy,

  > I think it's a cause of problem of Windows questions begin during installation.
  Why do you think that? In my opinion, if this problem starts when installing has nothing to do with Windows because it s not completely installed then why Windows should ask this question?

  I think it s a bad hardware work if you already checked the memory with Memtest so I think that the RAM should be ok.

  From my own experience, I recommend to check the HARD drive for bad sectors using Drive Fitness Test or another HARD drive diagnostic tool.
  I had a similar problem a few years back that the boot system has been very slow and the reason was a bad sector. So I checked the disk with Drive Fitness Test that shows the bad sector. Now, I have replaced the HARD drive, installed Windows again and everything worked again properly! :)

  Check this box!

• Satellite L30-PSL33E - product recovery fails

  Laptop Satellite / L30-psl33E

  This is what happens:...

  Product recovery disc boots, loading files, windows recovery watch utility box select English, then gives possibility of partition of drive or any use, I click to recommended any disc, then computer past the black screen, delete the partition 0, erasure of partition 1. * error...
  (error creating file\\./physical drive0, the system cannot find the file specified),
  hard drive # 0 is not accessible or bad raid configuration.
  * Then an administrator opens upward *:... part of disk failed, has not the raid class, press any key to continue, * I press a key, *, the computer hangs, press a button again, another box of Directors appears with the command line.
  x:\windows\system32\cmd.exe,

  Nice anyone got advice or tips, thanks

  It's very strange

  The error message says something about RAID but the L30 does not support the RAID and also the RAID drivers are not necessary.

  I m a bit confused and I think there could be something wrong with the HARD drive.
  Have you tried to reinstall the operating system from the original CD of Microsoft Windows?

  Try this format the disk using this CD, and then try again to reinstall the operating system.

  If this does not work then a HARD disk problem is possible

• Satellite L30 PSL33E - new HARD disc but startup fails

  Laptop Satellite L30-psL33E... .total HARD drive failed

  Installed the new HARD drive, hitachi hts541616j9sa00.
  Start Recovery CD, this completes then the computer shuts down.

  I restart and on screen, it is said wait while windows is loading for the first time.
  It becomes in what concerns the illuminated display and the scroll circle, then stops and the laptop just hangs there.

  I left for a couple of hours switch phone off and then restart.
  Computer laptop screen then start the system restart and start windows normally.

  I tried both options, the screen turns white and the same options appear while it sticks right in this continuous loop.

  Could it be a problem with the new HARD drive or restore disk any help appreciated

  Post edited by: sixbeers

  Don t think that this problem could be related to the HARD drive, but who knows that everything is possible, but I think that it s incredibly.

  Have you checked the memory modules?
  These strange behaviors for laptop may be related to a dysfunction of the memory of my knowledge too.

  But as I have already said, we can always provides suggestions and be 100% sure what part is affected a notebook check would be needed!

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

• Vibrating and sound crackles on Satellite L30 PSL33E

  Help, please. I have the laptop above, and the sound is driving me crazy, whenever I try to play music distortion, vibrating and cracking which makes it completely ruins the pleasure to try to listen to music, it seems worse, when the hard drive light flashes quickly.

  The noise problem is not only limited to play music, the sounds of windows system is just as bad.

  Also is it supposed to be this intermitant "whoosing" sound like waves on a shoreline of sea from the region of cooling fan?

  Any help would be greatly appreciated.

  Hello

  I m an owner of the Satellite L30 with Vista. It s my second notebook.
  I can listen to my mp3 without any problems! Everything works beautifully.
  The laptop is a little slower with Vista, but it's ok.

  One question; Have you noticed the same audio issues if you are playing an audio CD?
  It would be very interesting to know if the sound is bad if you listen to mp3 files stored on the HARD drive.

  Did you check the sound options? In the control panel in Vista, you should find the Realtek HD audio manager.
  It s also installed on my laptop.
  Here, you can set the different sound effects, speaker setup and the default format.

  I would recommend this review!

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Satellite L30 - 10Y: error checking after the 2 GB of RAM

  Hello

  I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
  I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

  I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
  The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

  Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
  Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

  I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

  Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

  Hello

  I read your announcement carefully, and it seems that you have checked that everything what is possible
  So in my opinion the two ram modules are not compatible set
  It's the only plausible explanation for this problem.

  AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

  Finally the short beeps are coming from the BIOS and it means that the error has been detected.

• Satellite L30 does not start after the upgrade to 2 GB of memory

  I bought 2 GB Crucial memory for my L30. After removing the 512 MB module and adding two modules of 1 GB the L30 wouldn't start. With only 1 GB start ok ok, with the other boot only 1 GB.

  Either 1 GB modules and module of 512 MB with start ok. The two modules of 1 GB boot not together. Crucial gave up and offered a full refund, but I'd rather have a solution if possible.

  At the BIOS level is 2V30, that I understand to be the latest version available.

  Ideas please, John

  Hello

  You're right, this problem seems very strange and I wonder why this happens.
  Satellite L30 certainly supports the 2 GB of memory and you should be able to upgrade with 2 x 1024Mo modules!

  It's strange, but it seems that these two modules are not compatible together
  I found Toshiba recommend module on options and accessories site.
  DDR2 400/533 1 GB (PA3411U-1M1G) maybe you could try this one...

  In any case, I don't think that you will be able to solve this problem in another way. The modules must be replaced.

• Satellite L30 (PSL33E) - need LAN driver for XP

  System: Satellite L30 - 10V / PSL33E - MS Vista SP1 based 6.0.6

  Problem: LAN driver missing from device - network cards manager & not found during the analysis for material

  Toshiba - discontinued models - link to device - gives only the link to Drivers Realtek XP - XP LAN Driver drivers once installed does not work

  (1) what are the right drivers for the LAN port on the Satellite L30 - 10V / PSL33E for MS Vista Basic?
  or
  (2) what is the chip the value used for the LAN on the Satellite L30 - 10V port / PSL33E?

  Hello

  On the Toshiba site I founded the chipset driver for your model. It s built-in display drivers. Check this box:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  The network driver I think you should download the Realtek page. I can t he find for Windows Vista.
  [www.realtek.com]

  Welcome them