Satellite L300-1 has 3 - recovery problem

Hello

I need help to use system restore.

I have a Toshiba L300 1 to 3 wines. Vista.

The system has fallen, lack of recovery tile. You plan repair through F8 initially went, everything was going according to the instructions, and all of a sudden, the computer shuts off after a few seconds to implement market and nothing.

Nothing works, no, F8, 0 "and others.

There is only F2 and F12. After pressing a button is only a signal and nothing works.
Is there a chance to revive it, or is it better to give somewhere on the site?

First of all: this is the English language community - please post in English!

Now a few questions:
Hard drive recognized by the BIOS (BIOS first page)?
If this is not the case, the HARD drive is dead and you need to replace the HARD drive.
After that, you will need to use the Toshiba Recovery disk to reinstall the system.

If you n t have this disk, you will need to use the Microsoft Windows CD to install the operating system.
The necessary drivers are available on site pilot Toshiba.

By the way: these issues have been posted several times in this forum. Go into the nets of singles and read the recommendations.

Tags: Toshiba

Similar Questions

  • Satellite L300-1 has 3 and WXP - computer laptop is very slow

    I installed Windows XP computer laptop Satellite L300-1 has 3.
    After portable installation is very slow, I think that the problem in the SATA driver.

    Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

    Thank you

    Hello

    May I ask how you installed Win XP?
    Did you change the SATA mode on compatible in the BIOS settings?
    If yes then this problem is related to the missing SATA drivers!

    You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

    Launch the .exe with the settings file a p

    For example (the files will be unpacked in the storagemanager folder):

    c:\downloads\iata_cd.exe - a c:\storagemanager Pei

    An accurate description, you will find in the Readme! Read it!
    Then you will get the unique file which could be included for Win XP CD using nLite software!

  • Satellite L300-1 has 3 - slow start WinXP SP3

    Hello everyone

    Recently, I installed Windows XP (service pack 3) on my laptop * Satellite L300-1 has 3 (Dual core T3200, 3G of RAM) *.
    There is a problem: starting time on the computer and enter in Windows is too long (about 60 seconds)
    I have not any application on my laptop, and I didn't have this problem when it had Windows XP (service pack 2)
    Would you please help me on why this problem exists?
    Thanks for your cooperation!

    You must determine what is the cause of the delay. It could be a driver incompatibility.

    Google "Bootvis". Its a Microsoft utility that records everything that happens during startup and displays a grid with delays in the services, drivers, peripheral, etc...

  • Satellite L300-1 has 3 - need some drivers

    Hello
    I need help to install a * SM BUS controller * and a * Signal Processing controller and PCI data acquisition * for my computer laptop Toshiba Satellite L300-1 has 3.
    I have a processor intel T3200.
    Help, please.
    Thank you.

    Hello!

    What operating system (operating system) do you have?
    Have you used the recovery disk?

    You can find all the drivers on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • How to connect by Satellite L300-1 has 3 on TV?

    I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.
    I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see the image on the TV?
    I need software for that, or I did something wrong?

    Thank you!

    Hello

    All LCD televisions have several video - in different ports and what you should try is to use the VGA-to-RCA cable.
    Your TV must have port cinch. Connect your laptop to the TV, turn on RCA TV port and then use FN + F5 key combination to switch the LCD TV.

    Please let me know if this work.

  • Satellite L300 - ODD has exclamation mark in Device Manager

    Please could someone help me with my Satellite L300 laptop?
    It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

    I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

    Remove the device from the list and restart your laptop.
    The problem again?

    What operating system do you use?
    You use your laptop to factory settings?

  • Satellite L300 - 22 X and recovery disk

    I have a Toshiba Satellite L300-22 X I tried to restore new parameters and he said: I have a missing file, so it can not restore so I turned off my laptop that he loaded a black screen saying: Please insert the disk my laptop didn't come with a disk and I can't get around it sort.

    Can someone please?

    Hello

    Can you start installation of recovery as described in
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  • Satellite L300-1 has 3 - need a key more pressure

    Hello, I bought 1 month ago a laptop * L300-1 has 3 but,
    I have a problem with its keyboard which * "T" * key must rather other keys to pressure more

    + Please help me how I can solve this same key as others? +

    May be in this key is dirt or something else. To remove it using a jet of compressed air and test it again.

    In the worst cases, the keyboard needs to be replaced. Your laptop must be under warranty and so contact the nearest ASP that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  • Re: Satellite L300-1 has 3 - How can I use AHCI?

    Hello everyone,

    Recently, I have a laptop Toshiba L300-1 has 3 and I have a problem with the * AHCI in the BIOS when I install or use Win xp (sp2), the laptop cannot start and continue, I think because can not detect the HARD drive in * AHCI mode but doesn't have a problem with * COMPATIBILITY mode.
    Maybe some of you can help me with their knowledge.
    1, which is * AHCI? *
    2nd, which one is the best?
    3rd, how can I solve this problem?

    Thank you very much.

    Hello!

    If you are looking for the AHCI mode, you must reinstall Windows with drivers SATA (Intel Storage Manager). AHCI mode is faster than the compatible mode.

    After the installation of Windows in compatibility mode, you can enable AHCI mode. Therefore, you must reinstall Windows.

    If you want the AHCI mode, look at the Toshiba site for the Intel Storage Manager. This package contains the SATA drivers you need.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, this could be useful for you:
    http://195.182.196.33/KB0/TSB8602DB0001R01.htm

    Good bye

  • Satellite L300 - 2 6 (PSLB8E) connection problem XP WLAN

    Hello

    I didn't speek good English... .but hopefully some1 help me with WIFI problem on 'toshiba satellite L300 2 6 PSLB8E.
    I was reinstal system from vista to Windows XP sp3

    Everythink is right only works doesent WLAN "Atheros AR5007EG" correct or something is not diferent
    System show me without a network, but when I try to rebot connection cannot download IP address

    I try hundryds type of pilots
    On vista this doesent egzist problem

    Please some1 smart - I really need HELP :(

    Have you tested with different routers?
    Restart your router, and then try again.

  • Is dualboot on Satellite L300-1 has 3 possible?

    Hello

    I have the Toshiba Satellite L300-1 to 3 with Windows Vista Home Premium as the operating system.

    After you modify the partitions on my drive, I tried to install Windows XP in a system dual boot, but this isn't the case at all. I have question, is that this model (L300-1 has 3) is done only for Vista?

    Concerning
    NSK

    This model laptop is certainly not made for Vista only. The question is what you try to do exactly.
    I installed Vista and Windows XP Home edition on my Satellite A300. If it works on my laptop it takes work on your too.

    Please let me know how you try to install Windows on your laptop?

  • Cannot find drivers SATA for Win XP on Satellite L300-1 has 3

    Hello

    I bought a new laptop Toshiba Satellite L300 1 to 3, but I have a problem...
    I can't find the drivers for SATA.

    My system it works now on the compatibility mode and the system load slow (XP sp2).
    The Toshiba driver does not work, it says that the system is not having the minimum requirments or something like that...

    so, please if you can help me

    THX

    Please take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

    And please read the threads that are already posted in the forum!
    It of really NOT necessary to view 1000 questions on the same topic!

  • Start of Satellite L300-1 has 3 takes a lot of time

    Dear Sirs

    I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

    This model is like that, or it can be changed or may be downgraded to Windows XP?

    Hello!

    Here in the forum are already discussions on this problem so that you can search a little.

    There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

    Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

    I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

    But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

    Can someone please help.

    Hello

    Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

    What code you get BSOD?

    After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

  • Satellite A500-1HK has bad fan problem

    Hello

    Please, I've been trying to figure out the reason why my FAN works in 80% of his power when well even the base temperature is so low, and the fan makes huge noise, although Compairing for laptops with the same systems inside, and seems that my computer laptop iss making noise on the class, I can't look at the University because of its makes! Fan should get a rest too! ... anyway, I heard that TOSHIBA has had this problem with the products back on the past, just start to give me a solution and fast,.

    I need the laptop to be with me on Classes! but its noisy! Too much... I have heard say it has something to do with the version of the BIOS, as in the first 10 days I got it, it was big and smooth, but what program TOSHIBA update asked me to update BIOS v1.9 fan was becoming crazy!

    Help, please! and thanxx, HELP AND FAST! Please, I beg you!

    Hello

    Have you tried changing the settings in Win 7 power management?
    Do this!

    Here you can change the settings for processor and cooling module performance
    This will reduce the activity of the fan.

    Please check this doc from Toshiba:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

    It s on Vista power management, but it of very similar to Win 7!

Maybe you are looking for