Satellite L300 - 12L is not picking up wireless connection

Similar Questions

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• Satellite L300D - 12L does not work

  Hi, my Satellite L300D - 12L does not work.

  I was on windows and it came with a blue screen with white writing on it. I didn't see what he said.
  It turned off my laptop. Then it restarted. He got to the screen saying: start the system restart and start windows normally.

  I did the repair of launch option. He said windows loads the files then pulls up to the Microsoft loading bar then the screen turns white for centuries, just with the arrow cursor. I tried to leave two repair a normal but get the same.

  What can I do? Any ideas?

  Looks like Windows is damaged. I would run Recovery by pressing zero during power on. Backup your data first, because the rags for HARD drive recovery.

  Also check the RAM. www.memtest.org is a bootable CD or a FD

• Satellite P300 - 20 H cannot find a wireless connection

  Hello

  Can someone help me? My Satellite P300 - 20H can not find the wireless router.
  He works very well before both at home and work, nothing has changed, but the laptop now cannot find a connection.

  Everything works fine when I connect the ethernet cable, but as soon as I unplug NOTHING.
  The router is in the same location as always, and no electric element in surplus is around.

  I guess it must be something to do with the laptop because it is the same at home because it's a job, WITHOUT JOY.

  Thank you

  Richy.

  Ohhm man.
  There are many discussions on the problems of WiFi and I hope you read some comments here that provide some tips.
  Did you?

  Firstly it should check if the WiFi is enabled correctly.
  Activate WLan switch (LED should be lit) and use the FN + F8 to activate the WLan.
  In addition, the WLan configuration should be checked! (SSID, encryption type, password encryption, etc.)

  Last but not least make sure your WLan driver is up-to-date.

• hp7410 does not keep the wireless connection

  hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• Satellite L300 - 17L - don't see networks wireless detected

  Hi all

  I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card.

  First, I installed the driver indicated by this site, but I discovered that the map is actually a card Intel Pro 3945, not Realtek as specified in the section of the driver.

  Now I have installed the driver for the INTEL PRO 3945ABG, 11.5.1.15 version and also the PRO Set utility, and I do not see the networks wireless detected.

  I have a colleague who sees many networks using the same card but on another laptop.

  I also tested the switch on the laptop and it's on.

  Have you experienced these problems on your system? Please help me because I am really sad because of this problem.

  Thank you & best regards
  Valentine's day

  Hello

  As far as I know this laptop was equipped with the Intel 11 a/b/g WLan card.
  You should first check if the WLan router and wireless network cards use the same WLan standard.

  In the properties of card WLan (in Device Manager), you can check this settings, choose the Advanced tab.

  I would recommend also check if the WiFi network was activated properly

  Good bye

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L300 - plugged, but not charging

  Hello world

  I have a Satellite L300 under Win 7 32 bit
  It does not load, so when the AC is removed it will stop.

  I tried the power cycle - unplug everything, hold the power button for 30 seconds.
  The contacts are clean on the s battery connections and I uninstalled via the control panel and scanned as new hardware.

  I checked all of the web, but nothing helped, please could you help?
  Don t want to buy a new battery for no reason

  Thanks Pindy92

  > Don t want to buy a new battery for no reason

  Well, in this case, you should visit one of the points of service and need to check the laptop with a new battery.
  If it s battery not deliver, then I guess that the problem is related to problems of motherboard, so that would be the worst case

  By the way: you are using the latest version of the BIOS on this laptop? Make sure that the latest version of the BIOS is installed. But if the BIOS is up to date, then a new battery should be tested.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite L300 - 16L will not start

  Hello

  I hope someone can help me thanks.

  I have a Toshiba Satellite L300 - 16L that has suddenly refused to start. When I turn on my laptop, the screen stays black for centuries, and then a message from the Windows Boot Manager appears, saying:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  "Info: the input of the system could not be loaded because the application is missing or damaged.

  The problem is, I don't remember if I provided with the installation disk and I was unable to find it. I was told that I could buy one, but it is very clear on the website how much it will cost. It feels strange to implement credit card details before you know what the price will be.

  Can someone please advise what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new installation disc cost? If someone could set up a direct link where the disc can be purchased, it would be great.

  Thank you very much in advance for your help.

  Hello

  According to published information, boot.exe or smth like that Windows is corrupt.

  > Can advise someone please what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new
  > cost of installation disc?

  In your place, I would order a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba because it is cheaper and contains all the drivers/utilities that get Windows copy disk. I have never ordered from toshiba, but as I know that 2 weeks delivery and about 35 euros. Of course, you can get friends borow windows disk and try to repair or install windows

  All drivers are:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L300 - Windows does not recognize the connected device

  I have Toshiba Satellite L300 series, PSLB8E. It came with a basic version of vista pre-installed window and it was working fine until I decided to update.

  I took it to a computer for an upgrade store to ultimate window.
  This version worked very well for a few weeks until I have received a message on the screen that says: 'I have to get a genuine copy of windows.

  Because ever since I started having problems with my usb ports, my computer couldn't detect something I connect to it (usb, printer, mouse, etc.) he worked with modem only, sometimes it would open my external hard drive but it does not have its drivers.

  I then decided to buy a window 7 home base, but instead of this problem will disappear, that it got worse as my usb ports completely stopped working.

  I tried all the stuff I can think, but nothing has worked. the problem I have is that I don't have the original disc in Windows vista

  Someone please help!

  I agree: installing drivers for Windows 7 is very important to get all devices work correctly. Windows 7 is much better than Vista OS and I don't see any reasons why your L300 Sat should not work properly with this Win 7 OS.

  I recommend you to install the Windows 7 system again by install completely clean.
  After that, download all drivers Toshiba Win 7 of the Toshiba UE driver page.

  Very important are the drivers as value added package, Chip Set Utility, card reader controller, display driver, LAN driver, WLan, Sound Driver, Storage Manager and driver of the touchpad

• Equium A210 does not pick up wireless INTERNET

  Hello

  Why not my Equium A210 - 1 c 4, model PSAFJE pick up all wireless connections?

  Hello!

  You can only connect to wireless LANs where you know the password.

  If you see a WLAN, try to connect, enter your password and that s all.
  On some WLAN, you must know the SSID because it s not visible.

  But perhaps you can explain your more accurate problem.

  Good bye

• Satellite L300-2CW does not start

  Hello

  I hope someone can help as Im at a loss!

  Laptop - Satellite L300-2CW (PSLB8E-15W007EN) Windows 7 upgrade from Vista (Tosh upgrade disc)

  When I turn on it shows the Tosh screen then just a line of underscores in the upper left side and that's it.
  I've tried everything. F12 F2 holding 0 at startup but still nothing.
  The hard disk may have crushed the thought but put it in a basket and now have a copy of his hard drive, so nothing wrong there.

  IM completely lost now.

  Help, please.

  Thank you Russ
  .

  Hello

  You have tried F2, F12 and 0, but have you tried to press F8 immediately after switching on the device?
  Then you should see an advanced startup options.

  Here you must choose to repair my computer and Toshiba HDD recovery.
  This should launch the installation from the HARD disk partition.

  Have you created the recovery disc at the beginning?
  I presume that you didn t.

  Well, if the procedure with the HARD disk partition will not help, then you will need to order the disk recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them