Satellite L300: CDDCDW TSSTcorp TS-L633A device driver failed

I am using a Satellite L300 laptop PC series with a TS-L633A TSSTcorp CDDCDW CD/DVD drive, however the player currently has stopped working, saying that:

"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

I tried to uninstall the drive and restart the computer, but when the laptop tries to reinstall the driver I got error message saying:

"Software device driver has been properly installed.

Any ideas for how to get the operational drive again?

Hello

I think that this can be resolved very easily.
There are some discussions that offer a solution;

Usually, you will need to remove the device in Device Manager.
Then you must go to the registry and must remove the upper and lower registry key filters.
Here you can get more details:
http://support.Microsoft.com/kb/270008/en-us

After that, restart the device.

Tags: Toshiba

Similar Questions

  • Satellite L300-1BW - 19 on CD/DVD drive error code

    Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

    I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

    Any ideas anyone? ?:|

    Hello!

    Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
    http://support.Microsoft.com/kb/314060

    (1) run Regedit (start > run > Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Good bye

  • Satellite L300-19F and WXP - audio device does not work

    Hello

    I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

    BTW: he used to work on Vista.
    What should I do?
    And thank you

    -Download driver audio Realtek HD Realtek page.
    -Go to the Device Manager
    -Remove the sound card.
    -Remove the High definition Audio Controller
    -Restart the laptop.
    -Reinstall the Realtek HD audio driver

  • Satellite L300 PSLBOA - no audio output device is installed

    Hey guys,.

    I need to reinstall all the audio devices on my Toshiba Satellite L300 laptop.
    This site Web (free/real) should I go to reinstall them all back...

    I had the Realtek audio devices. I need ALL the features back! Does anyone know the exact/own/unfake/free site to reinstall all the audio devices on my computer?

    I have windows vista Home premium. And my model number: Satellite L300 PSLBOA - 08L 022.

    Please if anyone can help that would be great!
    Save me a lot of downloading the wrong things and go to the wrong sites!

    Thank you.

    Hello

    For me, it looks like an Australian Toshiba laptop and, therefore, you should use the Australian driver Toshiba page:
    http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/support_page.jsp?

    Check it out!

  • Satellite L300 - need Win XP Network Controller driver

    Hello

    My laptop model Satellite L300, the operating system is Windows XP Home edition.
    I had the driver problem.

    I need the driver for network (of yellow question mark in Device Manager) controller.
    Which should I choose in the list of drivers to download?

    TNX!

    Do you need a driver LAN or WLan driver?

    Control of network can be both to check if you need a WLan or LAN driver

    By the way; What L300-xxx you have exactly?

  • Satellite L300 - after what Win8 load DVD drive does not work

    I've just loaded Windows 8 on my Satellite L300. The DVD no longer works with a 39 error message, it indicates that the driver is corrupted. Also attached external DVD is not recognized. I can't find a driver to reload.

    All of the suggestions.
    Concerning

    See this article:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?PF=true&soID=3516888

    If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator is installed on the HARD disk, there could be a problem between Win 8 and software mentioned
    So to uninstall these tools, then restart your PC using the power--> reboot option in Windows 8. Your CD/DVD should be available now.

  • Cell C50-A00V satellite compatible lack High Def Audio Device Driver

    Hello
    I bought a Toshiba Satellite 15.6 "L50-A00V Notebook

    Features

    PROCESSOR: 2.4 GHz Intel® Core® i7-4700MQ Quad Core Processor
    SCREEN SIZE: 15.6 "screen
    RAM: 8 GB RAM
    HARD DRIVE: 750 GB HARD DRIVE
    GRAPHICS card: nVIDIA GeForce GT 740 M 2 GB with Optimus + Intel® HD 4600 graphics card
    Operating system: Genuine Windows 8 (64-bit)
    Bluetooth: Toshiba Bluetooth V4.0 (high speed)
    LAN: 1 Gbps LAN
    Wireless connectivity: Intel® 802.11 b? g? n
    Connector: HDMI? USB3.0
    Windows 8 now improved to 8.1

    Since the minute I brought this laptop home a few days ago his had driver problems and toshiba service station was nothing more than a PITA, it has functioned and more than any other bloated software that comes with it... later, when 8.1 hoping that would fix a few probs, he made my situation worse driver...

    in any case, I removed everything via a clean install (but the recovery partitions etc. to keep without danger left and made a recovery disc) anyway even after installation clean I I still miss the high definition Audio device driver in Device Manager, I get an exclamation next to him...

    other pilots who were missing I had downloaded their drivers from the manufacture and they are all corrected accept this driver... I bekieve this is a realtek driver, that I went to the site and their latest driver did not help...

    can someone please help find a working driver please, im trying my best to not send it back, but if I can't get its drivers working, then the hell with him, im send Monday morning and ask for a refund...

    so please if someone can save me the hassle to request a refund, I would really appreciate...

    Thank you

    Hello

    The laptop seems to be released for the Australian market.
    I found the drivers Win 8.1 on the Australian Toshiba driver page, but only pilots of Windows 8.

    However, it seems that the sound card was made by Realtek and Realtek HD audio Manager must be installed.

    Try this driver which was published on the page of the Toshiba UE driver for similar laptops models: [Realtek Semiconductor Corporation v 6.0.1.7023 8.1 - 64 Bit Windows | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7948 & selSh ortMod = null & language = 13 & selOS = 46 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 88586 & OSI D = 46 &] driverLanguage = 42]

    In general I recommend you to download and install drivers 64-bit Windows 8.1 to address common since the driver Toshiba UE page because these drivers are missing on the Australian rider Web site.

    Recommends that you install the Intel and nVidia driver chipset driver because the HD audio can be linked to the chip nVidia graphics too.

  • Should satellite L300-170 - I install the display driver?

    I have Toshiba Satellite L300-170 and I install Windows 7. When I go to the resolution of the screen (left click on the desktop) in the display writing "* display: display Mobile PC'* ' is this normal or should perhaps write" * Intel (R) 965 Express Chipset Family * "?
    What should I do to change this, if it's not good?

    When I'm working on Autocad 2009 go to work my laptop slow that he work on same autocad 2009 on Windows XP is only display driver or something else?

    Hello

    Normally in the graphic properties where you can change the resolution of the screen you can see the type of graphics card. Looks like you didn't install the display driver

    To verify the Web from Toshiba site to download the driver:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    After installing the driver, you might give us a feedback, what happened! :)

  • Satellite L300: How to remove the HARD drive password

    Hello world. I have a problem with my Satellite L300. I put a password on the HARD drive and now I want to remove it, but it doesn't let me,
    So any ideas on how to completely remove the prompt to "enter the password for HARD drive built-in user" would be very appreciated.

    Thank you very much
    Martin

    Hello

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56069

    The user wrote:
    + It's usually cycle which starts when you press or to start to change this option. +.
    + Once, I found that I was out. +

    Hope this is the info that you need to remove the HARD drive password...

  • Satellite L300 - several bad sectors on HARD drive

    Hello

    I'm very angry with my Satellite L300 - 14G. One morning, my computer refuses to boot Vista, each attempt ended with a crash and go back to the choice of startup (with 'repair my computer', 'safe mode' and 'start windows normally').

    I could save my data with a utility disk and try to "HDD Regenerator V1.71", which located a number of bad sectors on the HARD disk. I decided to put my computer as on the first day with the built-in utility.
    Two weeks ago, the same problem.

    I bought another hard drive and replaced it. Reinstalled Vista and my data... 1 month later... still the same problem (currently HDD Regenerator is scanning and find bad sectors 185!)
    I don't think that would be caused by a virus. I use Nod32 and I don't do anything illegal with my machine.

    Some mistakes seem to be generated every day... until the crash of the OS...
    Anyone have ever seen such a problem?
    (I bought in September 2008... no guarantee more for my machine)

    Let's take a look at your problem:

    -hdd went wrong and you are using a third party program to fix
    + Why don't check you with "chkdsk" and read the smart values of the disc? +
    -you bought another hard drive and after a short period of time the same failure occurs
    + was the new hard drive, a big and cheap or a little and a little expensive? +

    We will analyze what happened to your hard disks:
    -recovery written datas sectorwise back in training > bad sector crashed > and an error occurs
    -second hdd also went wrong > if this isn't a sustainable (expensive) hdd, it went bad because of operation > do you often take your laptop with you?

    This brings me to:
    -check the smart get more information
    -chech crc when reading from another source on the hard drive to verify if the hard drive or the controller or your memory gone bad
    -get a 'good' hdd or spend it on tests
    -make a recovery and everything right after a chkdsk to make sure that the file structure is ok before working with

    I never heard of a disk controller brocken on the motherboard of this distributor - but what I know...

  • Satellite NB10-A-103 - necessary wireless device driver

    Hello

    Recently I have formatted my HARD drive and reinstalled Win8. In the process it seems I lost my wireless device driver and cannot find the reference of it to download the appropriate driver. Could you please tell me what device by which the manufacturer is installed on my laptop?

    Part no is PU141E-00K01FFR.

    Thank you.

    If you used the original image of recovery for Win8 installed all drivers must properly installed e. You can check in the Device Manager. Adapter wireless network installed and registered correctly?

    In any case, all the drivers, that you can download at Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  • MTP USB device driver failed to install - Galaxy S4 and LG G3 phones.

    Original title: ver7 device driver instalation windows error when you try to connect smart phones mini Galaxy S4 and LG G3? Any help please

    I updated my system several times and its updates automatic out but I can't post of ASRock ion 330 in interface with my smart phones. My windiws has a rateing of 3.4 access experience.  For the mini Galaxy S4, I downloaded Kies\3 and original Kies both refuse to go beyond the connection at your stage deviece of the program before left im watching a dog spinning graphic and nothing happens and im left the peripheral USB MTP dryer failefk message to install.  I get the same message for my LG G3 too and ive no special software for this deviece istalled.  If someone has a way to work around this problem, I would be forever in dept here otherwise I will be cursed to tear my phone to transfer all the data on my hard drive laptop forever through a box of chip transfer of data via the USB port. Thank you.

    Hello Dean,

    I understand the inconvenience caused to you. I will certainly help you in this matter.

    As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

    Let me ask you;

    1. This already worked for you on this machine?
    2. You did any hardware/software changes to your computer before the show?

    Before you continue troubleshooting, please disconnect all external devices (printers, scanner, USB (Universal Serial Bus) drives, etc.) except the keyboard and mouse and then start.

    Follow the steps below and check.

    Method 1: Run the hardware and devices troubleshooter.

    The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

    Open the hardware and devices Troubleshooter

    If the problem persists, follow method 2.

    Method 2: Uninstall and reinstall all USB controllers.

    To remove and reinstall all USB controllers, follow these steps:

    1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
    2. Click the hardware tab.
    3. Click the Device Manager button.
    4. Expand Bus USB controllers.
    5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    6. Restart the computer and reinstall the USB controllers.
    7. Plug in the removable USB storage device and test to make sure that the problem is solved.

    Method 3:

    Check this resolution provided by stolagt on April 26, 2014.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Samsung-Galaxy-S4-MTP-device-driver-wont-install/d2d011f8-d776-488e-B2F7-3eaf00c1031a

    Let us know if you need more assistance. We will be happy to help you.

    ____________________

    Thank you best regards &,.

    Isha Soni

  • Satellite L300 - 17L: XP drivers for device controller and modem line

    Please, read before you close this thread as repetitive... (there is no answer to this particular question in the nets before)

    Hello.

    I recently bought Toshiba L300 - 17L without any operating system and (unfortunately) no unmanned. I installed the Windows XP (with Service Pack 3) and was able to find most of the necessary drivers (of http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp).

    Of course, I put the option fixes hard drive compatible windows installed and first mentioned in other threads... but there is always some problem with "modem on high definition audio device" and "line controller.

    I was told that the modem drivers are found in the audio driver pack (btw its works ok), but do not know which is my model as with scanners of system (such as the Everest) I can't find the name of the modem.

    The same with 'line controller', as I said here are the drivers for the motherboard... but once more - the system scanners failed to tell me the specific name of the motherboard (only general information is it Intel and chipsets names... but they are in many motherboards).

    Thanks for any help, especially from people who had the same problems.

    Hello

    I know, it's that your laptop supports its audio Realtek HD card.
    I downloaded and installed the driver from the page of Realtek Realtek sound card and the sound card is ok.

    I have to they that after installing XP on Vista laptops not all drivers are available for Win XP because some devices are only available using Vista.

    I put t know what controller line means and to be honest never heard of this controller, but I think as you translated it not right.

    Please check this doc from Toshiba:
    http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

    You will see that some drivers for some devices doesn't exist for Win XP

  • Re: Satellite L300-1 has 8 - SATA and driver sound

    I had to go SATA AHCI on compatible, because I wanted to install Windows XP on my L300. Is it possible to install the SATA driver under existing operating system?

    And one more problem. I can't install the audio driver.
    Installation goes ok, but after restart there is has no audio or even sound card installed in the Device Manager and it is still by the PCI device.

    Need help ASAP

    Sorry, there is no way to install the SATA driver on an existing operating system.

    You have two options.
    1. you reinstall Windows XP SATA driver. First go into the BIOS and choose AHCI SATA mode. Then, you can start the installation, but after booting from the CD, press F6 to load the SATA driver.
    2. you made on the operating system. This isn't a problem, but you have lost performance a bit.

    It's on you ;) you do

    Have you downloaded the audio driver directly from the Web from Toshiba site? Select this check box.
    And have you used Windows XP with SP2?

  • Satellite Pro U200-104 - mass storage device driver

    Hey all,.

    I just bought a second hand U200-104 and it installs now. My OS is Windows Vista Business 64-bit & 32-bit seem to work ok. Although I installed all that he is on the page of the driver that I keep having an unidentified "Mass Storage Device" in my device list.

    In the properties, it says:
    -Location: Bus PCI 3, device 11, function 2

    I hope someone can help me!
    Thanks in advance :) a mollion

    Hey Buddy,

    > Location: 3 PCI Bus, device 11, function 2
    To be honest, this information is not useful
    You should check the vendor and device IDS in the devices in the Device Manager.

    At the present time it is difficult to tell what device it is, but you should try to install the card reader driver. Visit the Web from Toshiba for this!

Maybe you are looking for