Satellite L300 (PSLB8A-0VK004) - cannot find the webcam driver

Similar Questions

• Re: Satellite L300D and Win7 - cannot find the WLAN driver

  I have the Satellite L300D (PSLC8C-06T01R) I just got this in the month; I decide to put Windows 7 on thinking there would be all the necessary drivers. Well I was wrong; Once I installed 7 we find all drives but the wireless card. I don't then told me the Vista disks would work on Windows 7 so I tried and no luck, I then put Vista on and everything was fine, then when I went to look for the driver for the wireless card in Vista, it doesn t do anything the card is always 'does not work correctly.

  Vista Atheros wireless drivers or something else on the site Web of Toshiba don t do anything.

  If anyone has the same problem made me know, or if anyone knows how to fix this or even if it is possible to find the drivers for windows 7 that would be great cuz that s my goal (Windows 7)

  Please as soon as possible I need this laptop at the University.

  For me, it makes sense to collect all relevant information before you do something again. Obviously you didn't check before installing Win7 Toshiba support page. Until that Win7 is not released Toshiba will offer no tricks of Win7.

  As I see you have Canadian cell phone model and I don't know what WLAN card is inside, but in your a story thing confused me. You have installed Vista again. I assume you have done this with original Toshiba recovery image. This recovery image is designed for certain model of laptop and contains all the necessary drivers for all hardware components. I don't understand what the problem with the wireless network card.
  I have to ask you if you have installed Vista with the Toshiba recovery image?

• Satellite 3000 - X 11 - cannot find the Lan driver

  I have a Satellite 3000 - x 11 laptop which has a local network on the back, but I can't find a driver lan for this anywhere X-(i have reinstalled windows XP, hoping that would find it, but no luck)
  ,

  There is no driver on the surport only a driver to dailup modem. Can someone help me with what he drives me crazy.
  Oh and the same device manager dose not see.
  Thanks in advance :D

  To my knowledge, this Satellite 3000 - X 11 doesn't supports LAN.
  Did you find the LAN port anywhere?

• Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

  I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
  In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

  Hi bdelrio,

  Thanks for posting. Try running a System File Checker to find errors.

  Click Start.
  In the search box type cmd
  In the menu start right click on cmd.exe and select Run - As-Administrator.
  In the command prompt, type "sfc/scannow".
  Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• Satellite L300D - cannot find the XP driver for the graphics card

  Hello

  I just bought a Toshiba Satellite L300D and I installed Windows XP (instead of vista, which was preinstalled). I can't find the XP driver for the graphics card... Everest recognizes him as ATI RS690M. A download link will send me straight to heaven!

  Thank you in advance,

  Nikos

  PS. of course, I searched the display on the sites of several Toshiba driver and I got this message: "the resource you are looking for has been removed, had its name changed, or is temporarily unavailable."

  After that, I tried the driver from ATI, and it seems that they are more home driver for XP.

• Satellite A200 cannot find the storage driver

  I have a laptop satellite A200 and everytime I restart the computer, it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  We can I find it?

  > it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  Go to the page of the Toshiba driver and download, storage manager,.

  http://EU.computers.Toshiba-Europe.c...ivers_bios.jsp

• New Laaptop. Toshiba L850 1 4 Windows 7... cannot find the Webcam and can't find where I can slot in a CD/DVD. Help please?

  Please can someone tell me where I can find the Webcam on my laptop?  Also, I can't find where the place is to the CD/DVD. I will be grateful if someone can help.  Thank you.

  My email address is * address email is removed from the privacy *

  Here is a download link to the user manual that will answer your questions:

  http://UK.computers.Toshiba-Europe.com/innovation/download_manuals.jsp?service=UK

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• 4400 Workstation XW - cannot find the graphics driver

  Paul Tikkanen advised me to ask here for help about this problem.

  The pc is a Workstation XW 4400 (PW375ET), with Windows XP SP3 and the .net framework 4.0 installed (I don't know if it's relevant). There are some old looking for graphics card plugged into the motherboard with the name written on it of MATROX (Paul says it's a Matrox G200 according to the ID of the hardware) but this ("this Setup program does not detect a supported by this software Matrox graphics card') or all the other drivers that I found do not work.

  Is the hardware id

  PCI\VEN_102B & DEV_2538 & SUBSYS_0947102B & REV_02

  Maybe someone here can help.

  with sincere friendships.

  Naim Saari

  Helsinki, Finland

  Googling "PCI\VEN_102B & DEV_2538 & SUBSYS_0947102B & REV_02" gave a few sites and after a minutes to read (but not to download anything I have concerns on part 3 pilot sites), I found that the card is a Matrox Parheila AVPe.

  Googling "Matrox Parheila AVP" is the Matrox product to this map page. After a few minutes navagating on this site, you can find the XP driver for this card. There are 3 of them, but the last driver HF dated May 8, 2007 is probably the right to choose, it is the 1.13.00.158 HF version and supports XP and VISTA.

  To obtain the driver, start http://www.matrox.com/graphics/en/products/legacy/parhelia/parheliaapve/ , and then click Driver and software in the left pane. Click on Parhelia Series then check Parhelia APVe and press Next. Click Next and drivers of Windows XP (or the required operating system), and then click Next. This should give you the necessary driver selection page and it should be obvious what to do next...

  But note the message on the download page of the driver on the removal of the old driver before you install the new driver...

• The installation of XP Pro cannot find the hard drive

  The machine is running XP Pro 32-bit, and I am "upgrading" to 64-bit to work with AutoCAD.  When I boot on the 64-bit Setup installation CD can not find the hard drive and the demolitions.  The drive is already formatted to NTFS.

  You try to install on a SATA drive or your disks are on an add-in controller card and the Windows XP Installer x 64 doesn't have the required driver for the controller so it can't detect the drive.

  You have three options:

  1 - Use the F6 method to provide the installer for Windows XP x 64 mass storage drivers.  Drivers MUST be provided on a floppy disk, the Setup program will not accept the drivers from other media sources.

  2 - enter your CD of Windows XP x 64 drivers.  Note you will find reference to SP3 slipstreaming your Windows CD which you can install Windows on a SATA drive, but please note that Windows XP x 64 doesn't have a SP3, SP2 is the latest service pack for Windows XP x 64.

  3 (for the integrated SATA controllers) go into the BIOS and put the controller in IDE, most motherboard with SATA controllers mode on Board have an option to do this.  When mode IDE Windows XP Setup will see the drive and you will be able to install Windows.  Once Windows is installed, you will be able to install the SATA drivers from the installation of Windows XP operational.  You install the SATA drivers before changing the SATA mode controller in the BIOS, or when the Windows boot up upward a BSOD with a 0x7b error.

  John

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• Cannot find the controller driver of Bus SM for Satellite L300 01:00

  Hi all!!!

  Cannot find driver for SM Bus controller (what is it)
  Need help

  Satellite L300 01:00 is my role model

  You have Windows XP or Vista?

  For XP you will not find a driver for the mass storage controller and SM Bus controller because these devices are only supported by Vista.

  And here's a document might be interesting for you:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

• Cannot find the display driver for Vista 64 bit for Satellite L300 - 17l

  Hello

  I installed now windows 64 vista on my laptop, but I can't find a driver for my display that works in vista 64.
  On the Toshiba site, they have just the version of Vista 32.

  Maybe someone can help me to find the right one.

  Greetings

  Hello

  I discovered that Portege M700 (PPM70E) has the same graphics card and it is supported for Vista 64-bit. Download and try to install the version of the driver 15.2.6.64.1272.

  You can find it on http://eu.computers.toshiba-europe.com > support & downloads
  Please inform us if everything works well.

  BTW: you have created recovery DVDs until you have installed the new version of Vista?

• Satellite A200: Fingerprint issue - cannot find the fingerprint sensor device

  I have a series 1.5 year of Satellite A200 (PSAF6A) with fingerprint scanner integrated.

  Recently I became unable to use the scanner.
  He back constantly with an error "cannot find device fingerprint sensor.

  I don't know how I can fix this problem because it is incorporated.

  I have not installed anything recently so I don't know what happened.

  Help, please!
  Thank you

  Hello

  Have you tried to reinstall the software of fingerprint?
  See the Toshiba page for the latest version of the software.
  First uninstall the previous fingerprint software and reboot the laptop.
  Clean the registry using the CCleaner and install the new downloaded version.

  Good luck