Satellite L350-S5894 - do not open the Explorer

Similar Questions

• Satellite L40: Vista will not open the docs Word XP

  I have a new L40 and were transferred from the old XP docs. The new L40 won't open word documents. Can anyone help?

  DaveM

  Perhaps you need to install Office on your new Satellite L40, initially ;)

• Satellite L350 - 16L: could not find the SATA drivers to install Win XP Pro?

  I want to install XP Pro.
  Can not find a driver for a SATA drive. nLite will incorporate into xp driver SATA and install XP and then install any driver and the program.
  You will connect to the SATA driver, please

  I don't know who is right.

  Thank you

  Post edited by: splicanin

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

  Jimi posted a link to the worm: 8.6.0.1007 Intel Matrix Storage Manager, which includes the necessary SATA drivers!

  Good bye

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.

  By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.  1 program, all the others still work ok.

  This option is used to work, I installed a viewer of this program option (it's a based CAD program) and after that I uninstalled the viewer that he would not even start the program, he was trying to launch the viewr.  I noticed that the file association was still for the Viewer so I changed it back, but he now throws only program.  Under right click, properties, file Type: it is said the extension only where it used to say the name of the program.

  Thank you

  Sam

  Hey Sam,

  Default configuration program.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  If this does not work, then contact the Help Viewer support.

  All the best!

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• Could not open the photos sent to my Hot mail account?

  Could not open the photos sent to my Hot mail account?

  Hi Dean,

   

  Hi Dean,

  1. what happens when you try to open the attachments?

  2 are you facing this problem with any particular email?

  3 are you facing this problem all other sites?

  4. what anti-virus software is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Check if the security level is set to medium in Internet Explorer 9.

  Change Internet Explorer security settings

  Method 2: Optimize your internet Explorer and check to see if it helps.

  How to optimize Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: This link applies to Internet Explorer 9.

  If you encounter this problem only with Windows Live Hotmail, please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=1

• IE7 "could not open the file: * path *.» The file exists may not

  I created a package of IE7 a while back which works great.  Apart from this little problem.  It generates an error when the user tries to open a .msg to the WebApp.  It will try to open Outlook and display the following error message.  «Could not open the file: * path *.»  The file exists may not, you don't have permission to open it, or it may be open in another program.  Right click on the folder that contains the file, and then click action to check your permissions for the folder. »

  All the other files attached to work.  PDF, html, txt, rtf, etc.  I tried to move temporary Internet files to a different location with the same result.

  Someone at - it ideas?

  Thank you!

  He was captured on Windows Server 2003 x 64 running on W7 x 64

  Also note that when users choose to save him, it opens fine.  This isn't an "acceptable workaround solution.

  Looks a lot like this one: http://blogs.vmware.com/thinapp/2011/01/locally-installed-applications-and-integration-with-virtualized-internet-explorer.html

• FRM-10043 can not open the file under LINUX

  FRM-10043: could not open the file.
  I created a form correctly in windows. It works very well.
  Now, I have to use it under LINUX. Then I copied the fmb file in Linux
  where the default test.fmx is placed.
  
  Now, I've run the sub query and got the result can not open the file.
  
  
  [orabif@br bin] $ sh frmcmp_batch.sh userid=CNT/CNT@cmt
  compile_all = Yes module_type = form module = logonfile.fmb
  
  
  10.1 forms (form of the compiler) Version 10.1.2.0.2 (Production)
  
  10.1 forms (form compiler): Release-Production
  Copyright (c) 1982, 2005, Oracle.
  All rights reserved.
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  PL/SQL Version 10.1.0.4.2 (Production)
  Oracle V10.1.2.0.2 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle 10.1.0.4.0 Production CORE
  
  FRM-10043: could not open the file.
  
  Form not created
  
  
  Please help me solve this problem.
  
  * I know that there is no need to compile OLB files. but my forms display error that
  FRM-18108 has no dependent objects.
  
  When I use Frmcmp.sh GUI is the compiled form succesffully if there is no OLB attached with it.
  It gives Fr-18108 when OLB is attached with the form that he
  
  Timely help is needed...
  
  Thanks in advance...
  
  with cheers
  Sprity...

  spirty,
  This sounds like it could also be a permissions problem. I'm guessing that when you copy-n-Paste the form on the LINUX Server, you did what Windows Explorer. When they are copied to the server LINUX file will be created with the default privileges defined on the file. I recommend that you connect to the LINUX Server and check the permissions on the file. If your file permissions do not match the permissions of the text.fmb (or other files .fmb you have there) I suggest that you change the permissions so that they match.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• In Firefox does not open the submenu "Applications".

  I want to install the Firefox open with utorrent magnet links. I choose in the menu "tools-options-applications" and unresponsive. Will not open the menu "applications" to make adjustments. I have uninstalled and installed the new Firefox but the problem remains.

  nvsafe said

  I want to install the Firefox open with utorrent magnet links. I choose in the menu "tools-options-applications" and unresponsive. Will not open the menu "applications" to make adjustments. I have uninstalled and installed the new Firefox but the problem remains.

  Since no one answered after several days and hours of trial and error, I finally found what was and I didn't have access to "applications".

• Preview will not open the hyperlink to the specific DOI PDF format

  Hi all

  I generated a PDF of markdown by Pandoc (with xelatex as the tex engine); the PDF document contains hyperlinks URLS. One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160. In Adobe Acrobat Reader, this link accurately opens in Firefox (my default browser) and is then solved using a DOI Manager that I have in firefox. Overview, however, will not open the link. When you click, you get just that boing sound error.

  I believe this may have to do with the security aspects of preview that are cooked in the program - what kind of overview is able to open external files. There was a discussion on this here, but it is not exactly answered my question: https://apple.stackexchange.com/questions/119299/why-preview-app-refuse-to-open-local-lien-dans-un PDF file.

  If this isn't a connected safety side overview, is it possible to adjust preferences overview way treats the links that start by "doi:"? Other ideas.

  Note: I know there is a better way to include the Doi in Tex docs (with the DOI package) as the starting URL by "doi:" but I like to keep my Markdown as clearly readable as possible and does not markup inside latex. I might add a Pandoc filter for this - but I would rather understand the problem of this end if possible.

  Thank you!

  ... One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160.

  This address SHOULD you present is only the persistent identifier. To make a connection, precede the string with the http://dx.doi.org/ url so that your example is http://dx.doi.org/10.2307/488160

  Basically, the url is a program of resolution. By including a DOI link, there is no need for the Manager/addon Firefox DOI. You can have the text that is displayed differs from the URL. In other words, the manuscript shows doi:10.2307/488160 but the underlying url link is http://dx.doi.org/10.2307/488160

  You can see the particular style guide that you must follow to display format specifications. For example, see details for APA style.

• I can not open the last closed tab, does not begin with the tabs

  Recently, I noticed that I can not open the last closed tab (the choice is there, but is grayed out).
  Then, during the restart, I notice that the system does not restore the tabs visited - even if this choice is made in the Options.

  I recently installed KeePass and its extension in Firefox and it seems to work (I don't actually use it often). And, recently, I had a problem where the system would resize my pages (as if I hold down the CTRL key while scrolling to me.

  Several reboots corrected this problem - but now I can't resize by pressing the Ctrl and scrolling (while holding the Ctrl key and tapping the - key will be resize the window).

  Any ideas on how to solve this problem without a complete reinstall? I have been copying my Firefox profile from one computer to another over the years and I am worried about losing my data / preferences.

  Thanks in advance!

  -John

  Uninstalled KeeFox and the problem disappeared.