Satellite L40 - 18Z: how to merge two partitions into a single partition?

Similar Questions

• How to merge two catalogs into a single master catalogue in LR CC 2015?

  Here are screenshots after I merged the two catalogues on two different external hard drives.  Now, they are on the same external hard drive, but they seem to be two separate catalogues.  What should I do to complete the task?  Thank you!  Diane

  

  

  PS looking at your screenshots the best screenshots seem to show a folder hierarchy. This isn't a catalog but simply the folder with your originals in it structure. The second screenshot appears to show three different catalogues files and another folder, probably with pictures inside.

• Satellite L40 - 18Z - how to turn on wireless?

  I have Satellite L40 - 18Z running Windows Vista Service Pack 2.

  I've had a few cases where the wireless seems to have failed. On this instance, the LED at the front does not shine despite the switch is either off or on position. I checked the network card settings and it is activated. I have disabled/enabled the adapter, but without success. I uninstalled and reinstalled the driver - with no success. I checked for the latest drivers, but they are already installed.

  I also deleted and reinstalled the adjacent wireless card to memory, there still without success. The network and sharing Center diagnosis indicates only that the without wire must pass away - but I am unable to do so.

  Any advice would be welcome. Thank you.

  Hello

  The WIFI connection can be activated in different ways: with the hardware switch you have ever tried and key combination FN + F8.
  So have you activated the wireless network card by pressing FN + F8?

  From my own experience, I can say that the WLAN led is only if you use this key combination too.
  Check this box!

  In addition, you wrote on reinstall drivers WLAN you have installed you exactly? The most recent and pre-tested WLAN drivers, you can find the Toshiba site.

  Last but not least, I also updated the BIOS, if nothing else works.

• How to merge two partitions in XP

  I have Windows XP Service Pack 3.

  The space becomes very low on my NTFS Partition that contains Windows XP. There are partition with more than 100 GB of free space I want to access — preferably by merging two partitions or not not to resize the NTFS partition.
  From Googling, it seems that I cannot use the native Windows XP and need a third party application software, but I see that's not without risk of data loss.
  Can someone advise please?  Ty.

  6. as a result, select your C: drive and the option "Extend Volume". Your computer will automatically select the empty spaces available on your hard drive and you can change them if you want to do.

  This desire. Not. Work. for system volumes or boot or a partition on which the pagefile system is located.

  In addition, the GUI (using the disk management) method only works with volumes 'simple' or 'split', which are forms of "Dynamics" volumes and volumes of"base" that most of the people have set up.  http://support.Microsoft.com/kb/314343

  Given that the OP asked about the increase in the size of the partition system (my Partition NTFS which contains Windows XP) which is probably also the boot partition as where the pagefile, the posting is irrelevant.

  For Andrew pieces:

  Here are a few options in alphabetical order:

  Acronis Disk Director
  EASEUS Partition Manager free
  O & O Partition Manager 3

  Paragon Partition Manager

• Can I merge two Collections into a single?

  I have two Collections with similar content... "Oldies" with 138 photos and "Oldies 2" with 93. Maybe I should mention that a few photos in the two Collections.

  
  

  I want to select and move 'Oldies 2' in 'Oldies' photos by dragging them in the "Oldies".

  I then would be left with "Oldies" containing 231pics and "Oldies 2" with it's 93 photos.»

  Here's my problem... I would need is more 'Oldies 2' in my Collection can I remove it and he is happy with 150 photos? Or will they removed in 'Oldies' too?

  Cliff

  

  If you open 2 Oldies and select all (Ctrl-A or Cmd - A), and then drag these photos in Oldies, you have combined the two collections into a single. Once you are sure that it has been a success, you can remove Oldies 2 without problem.

• How to merge two discs into one?

  I recently updated my OS to Windows XP Edition Home Premium to Windows XP Pro. One way or another I have now two drives (Local 'C' and 'E' Local drive).  When I start the computer it opens to E drive and I continually have a message that I don't have enough disk space on drive E.  How can I megre present two discs into one?  I tried to copy the contents of the C drive in drive E, but I get the message that I don't have enough space on this drive.

  Recommendations or suggestions will be appreciated.  Thank you.

  Ernie...

  Hi Ernie,.

  I suggest you to follow these steps and check if the problem persists.

  a. go to the start menu and open 'control panel '.
  b. Select the option "System and Maintenance" If you use the Control Panel view home and 'Administrative tools' If you use the "classic" view
  d. in the "Administrative Tools" section, select "format and create partitions on the disk.
  e. for users "Classic view", select "Computer management" and select "Storage". Once finished, click on "disk management".
  f. when the list of your reader, choose the one with which you want to merge your disk partitioned with (for example drive E :) and select 'Delete Volume'.)
  g. therefore, select your C: drive and the option "Extend Volume". Your computer will automatically select the empty spaces available on your hard drive and you can change them if you want to do.

  Note: Make sure that you back up the data and then remove drive E.

• How to merge multiple images into a single document and place them on the bottom

  I am trying to merge multiple images in a single document and arrange them on this document and save it.  Is it still possible?  There are five black and white drawings that I've resized at all have the same size.  Tutorials that I looked at, but it seems that everyone has another way to do this and all are very confusing.  Thanks for your help.

  It is not surprising that "everyone has a different way to do this." In Photoshop that is common. Try this:

  1. open a new file large enough to accommodate five drawings.

  2. open each design, click on it in the layers panel and drag and drop it in the layers panel to the new file.

  3. Repeat until all are in the new file

  4. use the move tool to reposition. (They are on separate layers)

  5 flatten the file if you wish (but save a version not flattened for future editing)

• How to merge two partitions, C and D

  Hello

  I HAVE A HARD DRIVE BUT ITS IN TWO SEPARATE PARTITIONS, ALL MY EXISTING FILES AND PROGRAMS ARE ON DRIVE C:\, DRIVE D:\ IS EMPTY. I WANT TO MERGE D:\ BY C:\ SO MY LAPTOP DISPLAYS ONLY A READER.

  HOW CAN I DO THIS WITHOUT LOSING ANYTHING ON C:\ DRIVE?

  Thank you.

  Hello

  I recommend also using the Partitions Magic 8.
  I use this software for and I m very happy. It of very easy to use.
  This application also contains a management of partitions. You can change the sizes, create partitions for the use of Linux or join the partitions.

  If you google a bit for this software, you will find that a demo free downloads.
  If you can test it.

• How to merge two partitions?

  Hello

  I have to merge my F and G partitions without losing all the data to their topic. Is this possible? If so, how can I do?

  There may be partition programs on in the world that can do it, but from my experience, the only way to do this effectively without having to buy additional programs is to do this:

  (1) copy G to an external destination as a USB

  (2) delete the partition G

  (3) extend F partition to fill the empty space left by the deleted G

  (4) copy the files from the disc to USB on F.

• How to merge two projects in a single Premeiere elements 12?

  I want to add another project previously published in another project. It is not enough sense being not able to add other projects in an existing project... I tried the add media function but the file is just grey and non clickable any help would be thank you very much.

  Bearpaw020

  Just saw your last message.

  I'm happy for the opportunity to be useful.

  Hope the suggestions just post the work for you.

  RTA

  Add on... Another thought... If you do not have QuickTime itinerary, a conscious being note... Publish + share/computer/a number of choices. The first 3 are Adobe Flash Video, MPEG and AVCHD. Some people think that's all there are. There is more, including QuickTime. The user must scroll down. The lowercase and right choices scroll bar. An alternative is to click on Adobe Flash Video to select, and then use the arrow down key to move to the bottom of the list and the up arrow key to move to the top of the list.

• How to merge three files into a single Director?

  Hello!

  If I'm doing a school project. We do a program. We have a home page with two buttons. Then we have two other pages.

  One of the pages is a quiz, so it has different issues and you are riding in the quiz, when you click on one of the three answers and then you get a result after five issues.

  The other page is with an illustration and several photos of reversal, which changes the illustration.

  Then... I wonder how I can put both pages (the quiz and the illustration page) so that they will be linked (using the buttons on the home page) to the home page?

  I hope I could explain my question!

  Best regards

  Lovisa

  Assume that three films named start, Quiz, and Illustration. Let us look at the buttons in each film, allowing you to do what you want.

  1. in the startup movie are two buttons, a name QuizB and the other IllustrationB.

  On the behavior of mousedown attached to QuizB, you have the following: go to section X of the film "Quiz"

  On the behavior of mousedown attached to IllustrationB, you have the following: go to the section "L'Illustration" film X

  2. in the Quiz movie is a button named StartB.

  On the behavior of mousedown attached to StartB, you have the following: go to section X of the film 'Start'

  3. in the Illustration, the film is a button named StartB.

  On the behavior of mousedown attached to StartB, you have the following: go to section X of the film 'Start'

  In all three cases, setting X refers to the framework that you start on each film. The X can be a number, for example 1 or 5, or it may be a brand of the image, for example "start."

  All other things being equal (for example the film size and placement), you will find that these commands, will you spend your movies.

  Hope this helps,

  Rod Wolford

• Merge two images into a single MovieClip?

  Hello

  I have two images,

  var BigImage:BigPhoto = new BigPhoto() / / a PNG of 640 x 960 pixels

  addChild (BigImage)

  var thumb: LittlePhoto = new LittlePhoto() / / a PNG of 140 x 220 Pixels

  addChild (Thumb)

  I need create and save another image which is Big as a background and the small inside this position x = 40, y = 200

  Sorry for my English, but I need to "embed" the small photo inside the large Photo, I whish culd be understood

  Anyone knows how is the AS3 CS5.5 code for this?

  Thank you

  If you add the big picture for something, then add the image to the same after setting its x and y, you can then draw the container into something else. I assume you want that going back to the photo gallery, as shown here:

  http://forums.Adobe.com/message/3870150#3870150

  So this script has changed to what you ask would now read as follows:

  var BigImage:BigPhoto = new BigPhoto();

  var thumb: LittlePhoto = new LittlePhoto();

  Thumb.x = 40;

  Thumb.y = 200;

  var holdermc:MovieClip = new MovieClip();
  

  holdermc.addChild(BigImage);
  

  holdermc.addChild(Thumb);
  

   var cameraRoll:CameraRoll = new CameraRoll();   var bitmapData:BitmapData = new BitmapData(holdermc.width, holdermc.height);  bitmapData.draw(holdermc);  cameraRoll.addBitmapData(bitmapData);
  

• merging two partitions xp services Pack 3

  in microsoft site I am serching thi one give to it

  Merge a Partition in Windows

  • 1

    Click on the button of the menu 'start '.

  • 2

    Click on "Control Panel."

  • 3

    Click on "Administrative Tools".

  • 4

    Double-click 'Computer management'. If you are prompted to enter the administrator password, type it and press 'Enter' on your keyboard.

  • 5

    Choose "Disk management" option under the 'Storage' to display the list of all partitions on your disk or hard drives.

  • 6

    Right click on the partition that you want to merge with your primary hard drive.

  • 7

    Click on 'Delete Volume... "in the choice of menu.

  • 8

    Click the drive you want to partition space to merge with.

  • 9

    Click "Extend Volume... "Your computer automatically assigns all extra space to this player

    in the light of the foregoing, all are made, but I use xp ser pack 3 in there there is no opection of Volume to expand. How to merge two partitions in xp pack 3 ser

  Hello

  I don't know any way in XP except by specialist partition management software. I use Acronis Disk Director, but it costs! There may be some freebies autour but none I have meet in so I wouldn't comment on their reliability and efficiency, or even their ability to do what you want.

  If you're lucky, someone else can come back to this thread and give details of a free alternative.

  Tricky

• 2 partitions turn 1 on Satellite L40 - 18Z

  Small prob; just need to know how to make two partitions of hard disk 1.
  I can format it and reinstall a new copy of windows?

  I have 6 GB of free space on each and you want just a new beginning.
  When I start the laptop I have the choice of two os systems; Vista or win7 so I know ive made a mistake somewere?

  No personal information on laptop I want to keep just want to set it to factory setting bk so I get all the space free hard drive and you can install win7 instead of vista?

  pls help :-)

  L40 18Z
  Model: PSL48E

  Hello

  If I understand your question; you have two systems installed on your HARD drive and format the entire HARD disk to install only a single system. Right?

  You can format the HDD set during the installation of Win 7 OS.
  Boot from the Windows 7 disc and during the Setup process, you will be asked to format the HARD drive.
  Then format the whole HARD drive and this will remove two partitions.

  I hope I could help you if it is not please post more information

• Re: How to restore to factory on my Satellite L40 - 18Z?

  I'm trying to restore my laptop to factory settings; It's a Toshiba Satellite L40 - 18z. I tried the F8 procedure it did not work, also was in backup and Food Center, but it leaves me only the backup files. I guess I m going to need a disc, I'm OK, any help would be appreciated.

  Gary

  Yes you are right. You need for installation of recovery image recovery disk.

  If you n t have it maybe you can order a new one on https://backupmedia.toshiba.eu/landing.aspx

  Another solution is to install own OS using the Microsoft installation disc.