Computer stops when the wireless switch is turned on

Similar Questions

• Computer stops when the power to the computer to sleep, on computer virus problem

  Hello

  When I put my pc sleep and wake him up, a window pops up saying that the machine has stopped unexpectedly, and then the pc automatically reboots by itself,.

  after reboot, a window box comes in saying that the pc rebooted one... and that Windows will inform me what to do.  What happened yesterday and today.

  I must say however that Friday evening, August 24, my pc was slow work, since a few days I noticed, but Friday it was slower, I could see that something

  moving in often via the little blue wheel icon that shows that something is happening.

  I "had" McAfee Total Protection in my machine since 08/05/2012 and last night I clicked on the McAfee to do a full Scan of my pc, because I thought there was something fishy in it.  McAfee Full Scan clicked, a blue page with white letters arrived, quick and deep that I saw Dump numbers going up to 100, then the blue screen came out and restarted my PC.  After reboot a small box of Windows came to say that the machine had stop unexpectedly, he

  has run a control bar, when in fact something like 'your stop machine unexpectedly and windows will inform you what to do', something like that.  I then

  new click the McAfee icon, click the full sweep, the same thing happens again anywhere.

  Then, I went to the website of McAfee and talkative with Technical Support, he came into my pc to see for himself, he opened the Navigation button and had IP

  address to which McAfee was 'downtime '.  He told me I had a virus in my computer... He gave me a phone # to call for assistance in the removal of the virus. I called, the man

  did not come into my PC to see, he said, I had to pay $89. something taken him. I closed with him, went with the customer, aksed for my refund...

  sad situation, but I withdrew my PC with McAfee.

  I've downloaded Malwarebytes, checked my PC had 2 Trojan horses, you click on Remove to remove the.  Still had Malwarebytes in pc, I went to Trend Micro, which I had before in my pc for years and renewed my Sub. with them and has installed. After doing a full Scan, no virus.

  I made a 'machine checking if' work properly AM early this morning.

  This afternoon, August 25. I opened my pc, the audit began, time + after pc restarted normally, then all of a sudden the blue window came with white letters, dump numbers went up to 100 then pc rebooted, Windows little box came "... unexpected" and normal ran pc after.  Worked a bit on the pc then place to sleep so I could go somewhere, when I clicked on the mouse to wake up, as I always do in the pc, it awakened, blue page with while that the lettering came, took place on the same things as above.  PC ran good, had to go eat, put the pc to sleep, came back same thing occurred again

  I searched what happens and found nothing.  I went to the community, there nothing either.  So I'm here today to help hoping that you know what is happening.

  Thank you for your time and your help.

  Bebb

  Hello

  Currently, you have a program full-time antivirus installed on the computer?

  If you do not have one, I suggest you to install Microsoft Security Essentials.  Follow this link to download.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Follow these methods.

  Method 1: Run a Scanner online from Microsoft.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: To remove the virus manually, see the article:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Important: The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• My computer says that my wireless switch is turned off. Can't find it to turn it back on...

  It is a notebook from Toshiba. I can't find a switch on the front of the sides. If it illuminates with the function key, what other keys can I use?

  Hello

  go to the toshiba website and download a manual on how to use your laptop

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Cannot connect wireless or even turn on the wireless "switch" on my computer

  I recently installed a copy of Windows 7 Professional, yet the installation, I couldn't have the wireless network to connect to what either.  The first thing I noticed was that my wireless button (which is a touchscreen as a device on the top of my keyboard) was not on, can I turn it on, or do I not have the fn + f2 option.

  My computer is a HP Elitebook 8440p and regardless of what precedes, I proceeded to install drivers wireless on HP support site, they had to choose some and I ended up trying 3 which did not work.  I found a page of networking which showed these drivers wireless with a connection of sorts but closer examination revealed that the problem lied with simply turn on my wireless switch.

  LAN works fine (I'm here now) and the wireless switch control active if I turn on my any and hit him (orane to blue towers), but otherwise, I am astonished.  I don't think that the router is the problem, but it is a 'Fast' model... that's all I know at this point, although I'll try to find the type of exact model if its important.

  I think it's information pertienent, thank you for any help you can provide!

  My computer shows management I installed the drivers...

  In fact, I found the answer (I hope help you someone else with your post if the time is not lost)

  My wireless is fine, it turns off when I plug my ethernet cable.

  Appreciate the answer however.

• My computer is no longer warn me entry stop when the battery reaches the critical level.

  My computer is no longer warn me entry stop when the battery reaches the critical level. Officially, it shows a warning sign and told me to shot or recharge the battery when it gets to level criticism, but now he can't, but stop just when the battery has reached its critical level. No warning sign more.
  What should I do to get the warning before the pc turns off when the battery is at its critical level.
  My pc is hp laptop mini 110-3100. Start Windows 7.

  Hi Sage180,

  ·         Did you change in the computer before the show?

  Follow these methods.

  Method 1: Run the Troubleshooter of power.

  Method 2: Follow the steps in the article.

  Solutions to common battery problems

  Battery meter: frequently asked questions

  For reference: take care of your laptop battery

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• computer Vista laptop does not stop when the lid is closed

  I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

  Hello banditpunpun2,

  Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

  Please let us know status.

• Will be that the download stops when the computer goes into sleep mode?

  Will download, install, or all these action stops when the laptop goes to sleep.

  MK

  Yes, it will be.

• MacBook Pro stops when the lid closes, loses the open tabs and background image...

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer cuts automatically to the bottom when the lid is closed, losing all Web pages, and for some reason, some background, I've saved. (My browser is Mozilla Firefox and it prompts you to restore me the tabs lost, which he will).

  The led standby does not blink or light up when the computer is turned on, it will turn on only at startup. At startup, the login page is displayed, and after that I entered my password it takes about 15 to 25 seconds to load and open my account. What is going on?!

  Summary:

  Stop when the lid is closed,

  Loses the background image & open Web pages.

  Standby blinks only when starting,

  Time of loading extended after logging into my account.

  Any help would be greatly appreciated! Thanks a lot for reading.

  uhlexia wrote:

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer turns off automatically when the lid is closed.

  Take it back to the repair as well as your receipt of repair shop.  Apple has a 90 day warranty on all repairs.

  

• Where is the wireless switch?

  My mother has an Acer M3900 and she accidentally turned off the wireless switch.  The manual is useless and here on Acer.com it is said to use FN + F3 but his computer isn't a FN key.

  What other combination can I try?  I tried to find the setting, but it is a Windows 7 computer and doesn't have this feature.

  right click on the ethernet icon, choose open network and sharing Center click on change adapter settings on the left side, is your wifi adapter listed?

  If it is greyed out, right click and choose enable

• Windows firewall stops when a wireless connection is established.

  Windows firewall stops when a wireless connection is established during the start-up or wakup or manually connected via wireless.  The firewall can be activated manually after wireless connection is established.  Firewall survives boot and reactivation if computer connected to the router via ethernet (cable).

  OS is 32-bit Vista Home Premium, SP2.  The platform is Acer A4720Z dual-core Intel laptop.  Wireless adapter is integrated Atheros AR5007EG - Atheros 7.70.396 driver (whidh is current & compatible Microsoft version).

  Current virus/firewall is MSE and MS Firewall.  No firewall problem until the installation of Security Essentials.  Previous virus/firewall was Mcafee SecurityCenter Suite that uninstalled cleanly via the Remove Mcafee (MCPR.exe) utility.

  All the relevant ideas welcome. Thank you.

  Go to network and sharing Center and then choose manage wireless network and try to remove this Wireless if it is there and try to add it again if you want. Try to upgrade Microsoft Security Essentials and also check for update for Windows. Also, run the full system scan and remove potential threats. If the problem has not resolved then contact technical support:

  https://support.microsoftsecurityessentials.com/

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite A30-203: never cooling stops when the adapter is plugged

  Hello everyone,

  I'm using satellites SA30-203. In recent days, main fan of my computer ceases when the adapter is plugged. When operating with the battery, the main fan is sometimes - normally - stop.
  I'm not working only not with software that it takes a lot of CPU. So, what could be the problem?

  Kind regards
  Tunc

  Hi Tunc

  In my opinion the activity of the CPU is not affected only by the software you use, but all activities. Many of these activities work constantly in the background and the works of CPU. Please don t forget that the processor is not the only source that produces a lot of heat. The graphics card is also responsible for the heat.

  As you know all the hardware components are placed side by side and it needs to be cooled correctly. On my Qosmio F20 cooling fan starts to run even if the download of some files is active.

  Believe me that there is no problem. You have a device of high technology with the latest hardware components and the unit must be cooled properly. I can recommend you to change method of cooling in electricity from the night before and put it in silent mode.

  Good luck!

• Dell inspiron w / xp sp3 stops when the lid closed only in mode standby

  Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual.  Why is it turn off in standby mode?  Happens in AC mode and battery.  is it a software problem or a hardware problem.  I see others with the same problem and vista dell.

  http://support.Dell.com/

  Dell support.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell

  http://en.community.Dell.com/forums/

  Dell forums

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• BlackBerry BB Z10 Z10 stops when the battery indicator shows about 35%

  Z10 BB stops when the battery indicator shows about 35 percent without any warning. Does not illuminate until the charger is plugged. Immediately shows charge remaining 40% +.

  Please advice.

  Stephen

  Hello

  Here is a solution I tried after lookng through various forums and type of works for me. A common thing in most of the solutions is to take the battery and sim card out, leave like this for 1-2 hours and put them, I found back in and turn it on. I'm not sure of the logic behind it, but I remember reading that this overshadow the phone battery problems (connected incorrectly - essentially a reset) and begins to charge.

  I tried it 2 days back and I see that it worked for me, at least until now. I cross my fingers.

  I hope it's useful, works at least for few of you.

  Thank you all for the suggestions.