Satellite L450 - the user profile service failed the log on
Hello
I have a Toshiba Satellite L450 and I've had it for awhile now and it's never happened before, when I turn it on it goes by habit and then comes up with my name and a box for typing me my password, as usual. But when I put my password it says:
The user profile service has no log on
User profile cannot be loaded
The only option I have is to disconnect and when I do it takes back me to the bit of password. If I put the password in wrong, it tells me it s wrong...
Can t do something with it, I tried shutting down, etc. looked through the manual and can't see anything in there no more... :(
Hi mate
Please attach to this document from Microsoft:
+ Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
http://support.Microsoft.com/kb/947215
It seems to be the problem known to Microsoft. You use the FIX position here.
Good luck
Tags: Toshiba
Similar Questions
-
My user account will not open a session. message, said the user profile service failed.
Two days ago, I try to connect my messgae of acct user popped up of service user profile service failed to connect. Have the other 3 acct and they connect without any problems. How can I fix it?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Unable to connect to the laptop, receive error message "the user profile service failed.
can not connect to the computer
* original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.
Hi vincentbyrne
What operating system is installed on the computer?You can refer to the link below and use the provided steps to identify the installed operating system.
If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.http://support.Microsoft.com/kb/947215
I hope this helps.
-
I CAN NOT LOG - ON
I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
The user profile Service failed to connect. User profile cannot be loaded.
The user profile Service failed to connect. User profile cannot be loaded. Plus all the other user 5 passwords no longer work nor password records or profiles comments or PCL. Under Safe Mode, I am forced to reactivate the Vista operating system before use but cannot mode without failure. How can I get around this block?
I think you should check for malware. You will not have the particular malware that is mentioned in the following Article, but the Article describes in great detail to try to regain control of the computer. If regain you control, we hope, you can use system restore to go back ahead before the problem arose.
It would be useful to know what anti-virus software has been installed on the computer, as the ability to restore the system to function properly may be seriously jeopardized if you use Norton and some other software.
http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/
-
Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
When you try to connect to my Vista account download the above, m essage. Other accounts work, but as is the VDP administrator who does not open a session cannot make changes.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Retrieve the user profile for a new user after user profile Service failed and could not be loaded
I use Windows Vista Home Premium operating system.
I wasn't able to log onto my user; I searched online for an answer and advise him to create another user - I had 'Admin' status with the original user.
I followed the following instructions:
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&docid=39CC797DE6882CB6E040A68F5B285C29&l=en&s=DHS
According to these instructions, I've logged on the account current and open a session on the new user account. However, all my documents, pictures, music, files, office, Microsoft Office Suite, Microsoft Outlook Email, etc. have disappeared!
I not created it of new files or documents under the new user in the fear that it crushes everything and help restore everything back to its original state.
When I performed a search of the system / "C: drive", none of the documents or files have been found.
How to restore these things, especially my photos? Or, how to restore the original user?
Any help you give me for this problem will be greatly appreciated.
original message: error message: "could not load user profile and user profile Service failed". Made a function to create a new user, but all my files, pictures, music, desktop icons and other stuff are GONE AND I can't FIND them ANYWHERE!
Hello
Your data and files are still there in the C:\Users\Your user name where C: is the drive where
user profiles are stored.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Group Policy Client failed, the user profile Service failed
I just restored to an earlier point because of the downloads to my son. After a few days, The Group Policy Client failed when trying to open a session administrator and the user profile Service failed under a different name. I can't do anything because this screen is the key for any software, including the internet. I went into the BIOS but it looks like no help. How can I get around the display of password or reset the computer.
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Get the error message "failure to log - on, the user profile user profile Service failed to load.
Original title: I downloaded 17 Win. 7 pro updates Wednesday, June 15
Since this update was completed, I was unable to get into my computer; It goes through the usual startup routine, then it goes straight to the 'return - sleep' emblem that I usually just click on (when the computer is back to sleep, not a start-up), and the answer I get is "failure to log - on, cannot load user profile user profile Service. I sure as hell don't want to lose all my data with a fresh 7 - Pro disc. Someone at - it ideas? I swear I'll hold all Microsoft Updates for a few months before installing again. I also had problems with updates of March 2015. Thank you; Croft * address email is removed from the privacy * P.S. I use my old X.P. to connect again.
Hello
Thanks for posting your question on the Forums of community of Microsoft.
According to the description, you receive error message "the user profile service has no log on." User profile could not be found.
I would be grateful, if you can provide us with the following information to help us better understand the question?
- Did you the latest changes on your system prior to this problem?
I suggest you follow the advice given by Jayant Narang replied the August 14,2014 from the link given below and check.
Reference:
Hope this information is useful. Please let us know if you need help with Windows.
-
Cannot connect to admin account (the user profile Service failed)
Hi all
When I try to access my admin account, well I typed my password, BUT this message appears:User profile service failed
User profile cannot be loadedI can get my guest very well account, but can not use my admin... anything that can help please!
Anyone who can help would be greatThis problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215
-
Hello
Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
Can someone advice me?Hi Lagun,
Step 1:
I suggest you to follow this link below and check if this solves the problem.
Now search for the question.
Follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
See also:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
Step 2:
If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
http://support.microsoft.com/common/international.aspx.
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have another computer. I turned it on and when I typed my windows password, I received the following message: the user profile service service has no logon. User profile cannot be loaded. Service user profile Service has no logon. User profile cannot be loaded. I use Windows 7 Professional. I don't have a password reset disk. How can I get?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Original title: "the user profile service has no logon. User profile could not be loaded"and admin password will not work
I had this problem came several times before but it always correct itself without any intervention from myself. Now, even after restarting the computer several times I can not directly connect to my main Administrator profile. I have another profile without administrative privileges already done so I could at least use my computer, but only with limited permissions. When I try to do something to solve the problem, as the registry change, I'm prompted to enter the administrator password. I enter the password and the alert box goes, and nothing happens. Enter the password seems doing nothing, except the aknowledge the password is correct (it warns me when I entered a wrong password so I know it's no doubt receiving data). DOoes anyone know how to fix this? The computer works relatively well recently and have no idea of what decoration could have happened to cause such a mistake that bothers.
Hello
This worked for me, try allowing the default Administrator account, the steps are in the following linkI hope this will help! -
I created a new Admin account and when I went to her, I got the message:
"The service user profile Service has no logon. The user profile Service failed to load.
What's up with that?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
Maybe you are looking for
-
iMAC loses the ability to control external devices. What can I do?
I had problems with my iMAC "End of 2013", where it loses the ability to control devices (USB connected) external, either a printer or a CD/DVd burner. restart the computer will (usually) restore ability of the computer to control the external unit.
-
Satellite L650 - 12 p - black and white colors on webcam
Hello people I have a quick question on my laptop which is a Satellite L650 - 12 p. When I bought it, I'm sure that the webcam was color, but now it turned black and white. I tried different settings but cannot retrieve the color. Why it happened and
-
Obviously need a new fan as parts rattling inside fan error and get... How can I know if the fan is a 3 PIN or 4-pin without opening unit before ordering?
-
Passport in Volvo and Benz blackBerry Bluetooth connection problem
My passport connects to the Bluetooth system in my Volvo V70 to 2012, but in the next few minutes it disconnects. When I try to reconnect, it will fail. No matter if I try the passport or the car system. I deleted the pairing on the car as well as on
-
change ip address of the database servers primary and standby
Hello.I have an oracle server primary and backup (version 11.2.0.4) on windows 8 profesional.They work well until today.Today, I had to change my ip address on both servers.After that I changed the ip address of the OS, I changed the ip address in tn