Satellite L450D - tension on

Hi all

I have this problem on my computer:
When I shut down my computer, before you leave home early in the morning, all the led is off, and the computer is disconnected from the wall outlet.
the battery is not full charged each time.

When I go home at night, the computer is in the same place, in the same condition I have it curly.
the conduit for presence (the 2nd on the left) sector is sometimes on (fixed green light).
person to use my computer during the day.
which could shed light on the led?

thxs to meet

Hello

Remove the battery and unplug the AC adapter.
Let now the laptop unplug for a few hours.
After that, press Power button 30 sec long to ensure that the power has evacuated.
Now connect the batter and the AC adapter and check if the status led.

Read in the forum that might help

Good luck

Tags: Toshiba

Similar Questions

  • Satellite L450D - reset in the factory installation

    Hi guys, tried a factory reset and the laptop turned off itself to half way through, and I can't return it to all the. The laptop is a Toshiba Satellite L450D-11w and it was under windows 7. When I try to load it up I get the message bootmgr lack press ctrl alt del to restart.

    Tried to get into the bios and start but do not have much options just hd and cd drive not working. I also turned off and tried holding zero to load once warned a friend told me should appear, without success. When I go to boot the drive configuration only options I have are toshiba mk3263gsx-(s2) or tsstcorp cdvdw ts-l633c-(s4). I have no idea what to do from here after trying a few options, would be really grateful for the help.

    Thank you
    Damien

    Hello, Damien

    It's that the recovery image installation can not be interrupted. If this happens there is big problem because it cannot be continued and also you are not able to start from the beginning.
    HARD drive recovery facility is ruined with other words.

    Now, all you can do is to install the recovery image using the installation of recovery disc.
    I m afraid you didn't create one, right?

  • Satellite L450D-11V - PXE - E61 error

    Beginner of the computer here.

    I have a Satellite L450D-11V.

    Last week I dropped and since I get a PXE - E61 error. Below, it says something on Realtek Ethernet and then the error message appears below the media cannot be detected.

    What does that mean? and what do I do to fix the error?

    Cell phones have several bootable devices such as hard disk drive, optical disk drive and network card.
    In the BIOS settings it is possible to define which device can be used as first, second or last boot device.

    If the first boot device is not detected laptop tries to use the bootable device second and third at least. In your case to some hard disks drive and optical drive reason undetectable bootable devices ant he tries to use the network card. For this reason, you can see this PXE - E61 error.

    I can't say for sure but I'm afraid there is a serious technical problem with your HARD drive and it can no longer be used as ring starting m.
    What you can do is to enter the BIOS settings and check if the HARD drive is listed and recognized correctly.

    Also try start your laptop and press F12 to get into the boot menu. If the HARD drive is listed there he choose and press ENTER. What happens when you do this?

    Please post comments.

  • Satellite L450D not start - think usb device is connected

    Hello. I have a portable satellite L450D running Windows 7, which will not start. It gets to the loading of the windows with the windows logo page, but it will not go beyond this point.

    I tried repairing the system, and that tells me that a device is always connected to the laptop. I think it's maybe my phone, I had connected by usb last week. The usb cable is removed physically but the laptop obviously thinks that it is still connected.

    I'm passed through different service options - system repair, System Restore, restore the last good config, boot into safe mode but nothing seems to work.

    Ive tried to connect the phone while the laptop is trying to start and then disconnect it but still no luck. The laptop still think that the phone is connected.

    Ive not tridd remove the battery from the laptop, as it's apparently quite difficult.

    Any ideas anyone? Thanks in advance

    Hello

    I would recommend you check the boot order in the BIOS.
    Go to the BIOS by pressing F2 by turning on the device.
    Now, press F9 to get the default settings and save the changes press F10.
    Also check if you can disable the legacy USB if it s is not available, ignore this tip.
    Now, restart the laptop and test if it would boot from the HARD drive.

  • Satellite L450D - what HARD drive I can use?

    Will try a hard drive to a desktop pc in the present, going to work or laptops have different hard drives?

    Hey Buddy,

    Desktop computers and laptops have different drives. Desktop hard drives are bigger (3.5) and laptops using only 2.5. On Wikipedia, there is a nice article on hard drives:
    http://en.Wikipedia.org/wiki/Hard_disk_drive

    Satellite L450D already supports SATA drives if you need a new 2.5 HDD with SATA interface.

  • Can't use right click Satellite L450D - 11G

    Hello

    I have a new Toshiba Satellite L450D - 11G with Windows 7. A few days ago the right click button no longer works and I think it could be related to viruses. When I turn on the laptop the left button, that's what should be the right button until I have bring up the Task Manager, then the left button works normally but law does not work. I tried to restore to the factory settings, but it did nothing.

    Any advice would be much appreciated. Thank you.

    Hello

    Check please the mouse properties. There you can set button right action. Check it please, what is defined and ensure that it is a secondary click (context Menu, drag special).

    Please send comments.

  • Satellite L450D-13U - screen will not come

    I have a laptop Toshiba Satellite L450D-13U with 2 GB of RAM and no hard drive.
    My problem is that the display does not illuminate. I tried all the well known stuff and stuff like taking the battery, power down etc button but nothing seems to work.

    Can't even connect to an external monitor. Is there a part that I could change what can help this problem?

    Thank you very much

    Without any serious diagnosis, it is not easy to say what the problem is. Perhaps is faulty display.
    By the way: what happening exactly when you press button walk / stop?

  • Satellite L450D does not start

    My satellite L450D won't start. He stopped and when I walk back, he back the start menu, if I select the repair, it's just a black screen. If I choose start as usual, it goes to the windows logo but it remains stuck. I also tried to start in safe mode, but it says loading files and stays stuck.

    I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
    Any ideas would be appreciated
    Thank you

    > I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
    If you have a laptop model European 0 initially upwards will help any. You must use F8 at startup to display the advanced startup options. Is the option repair my computer available?

    Anyway, OS is probably screwed and new installation OS can help. Enter the BIOS and set it to default settings. According to redo this cell phone start and press F12 to get into the boot menu. When the boot menu appears on the screen, place the recovery in the optical disc drive disk, choose the CD/DVD device from the menu and press ENTER. This will force ODD to start the reading recovery disk.

    Let us know if it works for you.

  • Satellite L450D - 13 X - black screen of death/Blue Screen of Death

    Hello everyone.

    I have a Toshiba Satellite L450D - 13 X for children, and for the price it's a good laptop. Have had no problems with it until two weeks ago, when the screen froze for boys while playing a game and downloading a program on the net. Had to make a stop of force and since then, we have a BSoD on each startup. That's what we tried:

    On "Starting Windows", we are given the option to either 'Launch Startup Repair' that ends as BSoD or "Start Windows normally" who returns to the list of option "starting Windows."
    Any attempt enter 'Safe Mode' BSOD results.
    Attempt to boot an ISO of the disk recovery Windows on a USB key (we did put highlight and make promotion up) results in BSoD. Borrowing a correct installation of Windows 7 DVD and highlighting what an option cause BSoD.

    In fact, the only option that we used who threw something different has been using advanced startup options. On one of these options, we've got the Blue Screen of Death with the following information:

    Unmountable_Boot_Volume
    Disable memory the Bios Options such as cache/occultation

    Technical info

    Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0000000000000000 0 x 0 x 0000000000000000)

    I don't mind erase the hard drive and leave, there's nothing on what is essential. Very, very well, I'd appreciate a steer on it. Checked the Web for things and nothing seems to help for other options. I'm not particularly tech literate but can follow directions.

    Thanks in advance.

    It is really possible that the HARD drive is faulty.
    If possible try to get another same HDD used for test purposes and install OS using the Toshiba recovery image.

    A friend of mine had a similar problem and after Exchange of HARD drive, everything went well again.

  • Satellite L450D - 11 X, battery plugged in but not supported.

    My Satellite L450D - 11 X (fairly new) is plugged in, but the battery won't charge and the battery light is orange. Life flows or increases when using it plugged. I tried updating the BIOS but don't know if I did this correctly. Thanks for any help in advance.

    You can try the following:

    1 reinsert the battery
    2 unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off, indicating that the battery is fully discharged.

    If it still doesn't load, it can be the malfunction of the accumulator. In this case, you must contact the Asp (SAV) to replace. They will do it for free as you say it's always new.

  • Driver installation problem Windows XP Home on Satellite L450D-11 t

    I bought a laptop SATELLITE L450D-11 t with windows 7 and I want to use a USB stick for internet, but it requires a previous version of the operating system.
    So I installed windows xp, but on this site, it is not all drivers (motherboard, video, audio, network) compatible.

    Analysis of the situation, I found the driver for audio on the Realtek site but on the mother/video card driver, I have a few problems:
    the AMD 780 G chipset and the display hardware is an ATi Radeon HD 3200. On the AMD website, I found a package with all the necessary drivers, but during the installation of the system restarted itself each time I start the installation. I opened the event viewer to see if there is an error, but nothing.
    I restarted the pc mode provvisional: he can't complete the installation, but it gives an error "Unable to open driver for tracking" or something like that.

    Is there something wrong? I forgot to do something?
    Thank you

    Hello

    Why you n t take an another USB compatible with Windows 7? In my opinion, it would be easier to reinstall the whole laptop but ok, it s your decision ;)

    As far as I know the drivers on page AMD intended for office use only, so I think that they will not work on mobile chips. But maybe the only corrupt the downloaded driver files, then try to download again.

    As I've already said, I would choose another USB key. This laptop is designed for the new Windows 7 and everything should work properly on the new operating system.

  • Satellite L450D - need wireless driver for Linux system

    Hello

    I have a satellite L450D, with a Realtek RTL8191SE wireless card (windows 7). I use Linux for College and I can't get on the internet when I use linux cause the oporating system dose not find my wireless card.

    When I check from command line for wireless cards, it shows that there is not.
    I know other people who have had this problem and basically I need a driver for it.

    Can someone make me know what driver I need or where to find? I would really appriciate what I need to use Linux for the College.

    Thank you

    Hello

    I googled a bit and found some tips in the internet.
    It seems that there is no driver for Realtek rtl8192se WLan Linux and card rtl8191se.
    Had someone managed WLan installation by installing ndiswrapper from synaptic in Ubuntu + GUI. He downloaded the net8192se.sys driver W2K and net8192se.inf.

    W2k driver work but the combination W2Kxp driver or the xp or vista doesn t work.
    After that, you can use WPA because the WEP encryption is not supported

  • Satellite L450D-11V - wireless issues

    Help, please!

    My Satellite L450D not find or connect to wireless networks. I tried to connect my laptop in various places where I know that wireless connections are available, but it keeps prompting me to use an ethernet cable.

    Any help or advice would be most appreciated as has happened for the last 6 months or more.

    If your laptop can not find any WLAN in your area, then you must check WLAN card.
    Open the Device Manager and check if the WLAN card is listed and installed properly.
    Wireless network card is enabled? Use the key combination FN + F8 to toggle WLAN card.

    Can you also tell us what OS you use and don't use original Toshiba preinstalled OS or your own installation?

  • Satellite L450D-128 - Wireless internet does not connect

    Hello

    I have a Toshiba Satellite L450D-128 and it won't let me connect to a wireless network and I can't find the switch wireless and ive tried FN + F8, but it does not work. Could you please help.

    Thank you Ryan

    Hello Ryan

    I don't know what version of Win7 do you use and what can be the problem of using WLAN but if you use original recovery image, everything should work properly.

    At first check please if the wireless network card is installed correctly. You can check in the Device Manager.
    If the wireless network adapter is installed correctly, it must be enabled. Usually, this can be done by using the FN + F8 key combination.
    >.. .and ive tried FN + F8, but it does not work
    What does not work exactly? You have problem with the FN keys in general or just using FN + F8?

    When you press the FN key you find cards flash at the top of the screen?

  • Problem of warranty with Satellite L450D-11V

    Hello.

    I just need some advice here.
    I own a Toshiba Satellite L450D-11V with a years warranty. I bought it in the city of Belfast in the United Kingdom.
    So that travel in Asia one of my Ram chips burn for some reason, and when I arrived in Australia, I had to get it replaced.
    Now the chip grilled while the laptop was under warranty, but at the time where I got to the shop in Australia, it was a month after the expiration of the warranty.
    It cost me a cool $ 194.00 to get a new chip in it as I understand, it was a Toshiba registered shop.

    Basically, I want to know who do I contact about this because I kept the broken part and any reception and relieved of taxes for the expenses.
    I understand it has been repaired after expiration of the warranty and so I am not able to get help, but I'm being honest when I say that it happened before hand and I'm pretty sure there's a way to check when it is grilled.
    If anyone can point me in the right direction or give me some advice, I'd appreciate it.

    Thanks for your help

    Marty

    Hello, Marty

    Are you still in Australia?
    I can recommend you contact Toshiba. You can try to call Toshiba hotmail and ask for help or advice.

    Please check the support page s Toshiba under http://www.mytoshiba.com.au/customer-contact/support
    You will find the phone number or how to use the Email from Toshiba Support.

    Bye and good luck.

Maybe you are looking for

  • Time Capsule, don't automatically back BONES upward?

    I've scoured the web looking for instructions about backing up my operating system. Everything I found was how to use Time Capsule to restore files and BONES. How to get the operating system on the backup drive? Is it automatic or are there steps I w

  • FCPX does not open due to a "problem".

    I have the new FCP X something 10.2 or 10.2.1. I used it for a long time, then suddenly today, I open my final cut, and I get this message:it's NEVER happened before. I tried to restart my computer etc, but nothing worked? Why was he able to work fiv

  • Why SCM does not support RM or RMVB files?

    It forces me to use winavi to convert RMVB to AVI, which has no audio vedio. Strongly recommend SMC to the conversion of AVI file in the future development plan.

  • Get a stack of a process trace

    I have a simple application of Cascades that starts one thread (other than the main thread), and this thread sleeps for 1 second and then displays a message in a box of text on the GUI control. My application was compiled with - g. interrupt the appl

  • How to change the host names of the nodes after deployment?

    Help, please