Satellite L450D not start - think usb device is connected

Similar Questions

• ProBook 4740 s will not feed if USB devices are connected

  G ' Day, I have a ProBook s 4740 and after taking the laptop to the site, when I'm home and plugged things back, by pressing the power button would see it for a few seconds and then od light out. The LED above the power would have flashes once and then turns off. Needless to say, it would not start up.

  After a lot of frustration, I found that by unplugging all (wired Ethernet and USB devices) and by pressing the power button it would start up and even when starting I could plug the devices and everything is OK.

  I had to return to the site today and when I came back again, it wouldn't power up until I unplugged the USB devices. USB devices are external hard drives only, all running through a powered USB hub.

  This configuration has worked without any problems for wells in the year I've had the ProBook.

  This could be the cause?

  Thank you.

  The last update :-)

  After downloading the BIOS update, I decided to wait until I had a break in things until I applied it. Then around one hour before, I saw the red exclamation mark on the HP Support Assistant in the taskbar. Open it, there was an update of the available BIOS, so I decided to let him do. At this point, no indication that it was the F.60 update.

  I hate doing these updates that work at the machine code level where if things go wrong, they can go horribly wrong.

  Well, everything went well. Updated the BIOS and restart the computer. I went back in to the support assistant and got the information on the computer, and he says that it is now the F.60 version. If she went from F.43 to F.60

  I power it off, wait a minute, then restarted with everything plugged in and it worked correctly.

  Thanks again for your help.

• Satellite A200 not power external USB devices in mode 'sleep'

  I have a new A200. I have and USB hub and disc external hard USB powered. When I put it in mode 'sleep' their lights stays on. It came with Vista. I searched for the setting, but I could not find. It is not good for the battery. Any advise?

  Thank you.

  -Sinan

  Hello

  The lights are also on when the laptop is to stay in sleep mode or hibernation mode.
  You cannot disable the led s

• My C50-A-1DV Satellite will not start

  Hello

  Yesterday my C50 Satellite would not start. When turned on, it shows the Toshiba logo and then the little circles just keep them.

  I booted into recovery mode and ran chkdsk, but there are no errors on the disc.

  When I restarted, then she says the following:

  Preparation auto repair
  Diagnose your PC
  Check disk for errors
  Auto repair attempt

  Then at the stge small circles just continue.

  I started in safe mode and activated the boot record.

  Attached is the NTBTLOG file

  Thank you very much

  BigD

  Turning off the laptop
  Then press the power button and immediately after that, press the F12 button
  Then you should see a screen similar to this one:

  

  Then I recommend you to choose the option to drive HARD recovery... The last option in this menu.
  This would start the HDD recovery procedure and would restore the laptop back to factory settings...

  More details here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• Windows 7 Home Premium does not start and an external monitor connected via DVI to HDMI Cable

  I have a Dell Inspiron 531 desktop computer with a NVIDEA GeForce 8400 GS video card.  This video card has the following outputs: DVI, VGA and S-video.  When I connect it to my computer via the VGA port to PC to my Sony Bravia KDL-40XBR4 monitor port, the machine starts perfectly.  If I connect via a HDMI cable to one of the HDMI monitor DVI ports, the screen displays the video BIOS, but turns black when the operating system begins to load.  If I connect another monitor to the VGA port, yet once the machine boots fine, but if I connect the monitor to the computer and the Sony Bravia, once again the machine does not start.  The strange thing is that if I boot with only the connected computer screen and then plug the DVI to HDMI cable, then Windows 7 sees the Sony Bravia monitor very well, and I can extend the desktop.  If the machine mode 'sleep', both monitors work very well to wake up the PC.  So, if the Sony Bravia is connected alone or with the computer screen, the machine does not start (the screen will display 'go black' when the OS starts to load.)  I tried to run Windows in Mode safe, but he won't either.  I have all the updates of Windows applied and have installed the latest drivers from nVidea so.

  Hey Chris,

  First of all, about climbing, is not a technical support; This is a community forum where MS moderator and contributors are involved.  Now to your question ~

  It's very strange that the PC does not start when this unit is connected, but works fine when connected after the fact.  I've seen several cases where a hardware configuration of uinsusal will prevent a PC to boot.  I think that the culprit may be DVI to HDMI Cable that you are using.  If I were you, I try to connect the PC to a DVI monitor and see if it boots normally.  Also, see if the monitor can prevent another PC to start when it is connected directly via the HDMI.

  Good luck! Let us know how it turns out.

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• C50D-A-12V satellite does not start with ODD or USB

  I need to order recovery media form Toshiba to reinstall to factory settings but I can't get the laptop to boot with a cable usb or CD device. I changed the boot device but the laptop does not account for the command and the stars upward hard disk each time.

  Can anyone help?

  If you want to boot from an external source (IE USB device), you will need to disable the boot secured in the BIOS!

• Peripheral USB take two tests at work and does not start with Time Machine drive connected

  I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:

  

  I am running the latest version of El Capitan, 10.11.4.

  My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.

  In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.

  My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.

  Thank you, everyone.

  Try this-

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Satellite M40 (PSM42) - boot from USB device

  In the BIOS of my Satellite is not any choice to begin with USB (only floppy drive, disk, CD). Is it possible to use a USB - HDD for booting (instead of the internal drive)?

  Hello

  You can start only this features:
  USB FDD, HDD primary, optical devices, network (LAN)

  You cannot boot from USB HDD.

• Satellite L770 dosen't find USB devices

  Hello

  I just bought a new computer laptop satellite L770 OS windows7.
  I found some problem there, computer doesn't recognize/find/use of USB devices that are connected to the computer.
  I can find the devices in windows, but windows can not use those.

  I can 'remove' sefily of windows device and plug it in again and once more to use it.
  But the problem is that every time I turn on my computer, I have unplug the device and reconnect those, which is really frustrating.
  I tried to find some windows updates and latest drivers for USB or the motherboard.

  I found an update either of those. I wonder if there is hardware problem on my computer. I would be really gratefull for all the advice!

  Hello

  Don t think that his laptop hardware problem
  You should definitely test this with different USB device; Mouse USB, USB HDD, etc.
  I also recommend the settings the laptop configuration using disk HARD recovery option.
  This will outline the laptop in the same State as in the first day of purchase

  It might help to check if this is just something wrong with OS

• Computer doesn't recognize is not the Vista USB devices

  I have been looking for forums for hours. I put music on my mp3 and it worked fine, I switch between two different players. then I went to plug one of them in and... . nothing. USB ports are supported but computer, do not put the devices, I can't access it anywhere. Ditto for everything I plug into them. fee but usually has access to any device I plug im in. going to vegas tomorrow and would really like to put new music on my player. can anyone help please?

  * original title - USB problem *.

  Hello

  ·        You get an error message when you connect the USB device?

  Method 1:

  I suggest you follow the steps mentioned below and check if the problem is resolved.

  With the drive plugged in

  1. go to Control Panel by clicking the Start button and select Administrative Tools.

  2. click computer management , and then select disk management on the left

  3. then turn on the player.

  Method 2:

  I suggest to assign a new drive letter and check if the USB key questions in the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 3:

  Remove and reinstall all USB controllers. To remove and reinstall all USB controllers, follow these steps:

  1. click Startand click run type sysdm.cpl in the area of publication, and then click OK.

  2 click the hardware tab .

  3. click the Device Manager button.

  4. develop Bus USB controllers.

  5 right-click every device under the theUniversal Serial Bus controllers node and then click Uninstall to remove them one at a time.

  6. restart the computer and reinstall the USB controllers.

  7. connect the removable USB storage device and test to make sure that the problem is solved.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NB10 satellite will not start

  I was watching a movie on my USB with my Toshiba Satellite NB10, when all of a sudden my screen went white,
  I pressed the Start button & it showed onscreen Toshiba but would not start.

  What is the problem, I need help.

  Thank you!

  You are able to access the BIOS?

  First of all hold them down the power button 5-10 sec to turn off the laptop.
  Then press the button again, then F2 button to access the BIOS.

  If possible, please check if the HARD drive is on the first page of the BIOS... it must be demonstrated with some details like drive HARD size / name...

  Your comments would be appreciated.

• A5383 S55D satellite will not start without power

  Hello!

  I have the Toshiba Satellite S55D A5383 laptop and I have a problem with the battery, I think.
  Laptop does not start without power. What is happening since last week.
  In fact, since April 2015 battery does not last as it did when I bought (may 2014).
  I have'nt registered the product and I think I'm out of warranty.

  So, what can I do to fix this?

  You'll probably just get a new battery which is what I did. Try Amazon.