Satellite L50 - B - 2 8 - new SSD is not recognized in the BIOS settings

Similar Questions

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• A SSD from OCZ Agility 3 disc works with a dv9700T? Mine is not recognized by the BIOS.

  I bought a 120 GB OCZ SSD Agility 3 disc to install in my laptop the dv9700T CTO.  The drive is not recognized by the BIOS when it is installed in the Bay of 1 or 2, but is recognized when connected via USB as a secondary drive.  The drive works fine in a different computer, so I know the drive works.  There seems to be a problem with the SATA (ICH8) controller.

  Someone at - it any information on that?  Would love to get the drive works in my laptop.

  Thank you.

  Lloyd

  If you have a HARD drive installed in the secondary Bay and the OCZ SSD in the first Bay, the dv9700t starts and works very well.

  Lloyd

• Satellite P300 PSPC4E - new battery is not recognized by the operating system

  Hello

  I bought a new battery and it is not recognized by the system
  Satellite p300-PSPC4 win7

  drivers ok
  OK magazine

  The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

  the battery icon is present

  Thank you

  Hello

  Because your old battery is always recognized, I think you bought the battery is not compatible.

  That's why you should buy a compatible battery recommended by Toshiba.
  I think you can buy this Toshiba ASP.

  Welcome them

• Satellite L50-B-166-build-in webcam is not recognized in Skype

  Hello

  A week ago, I bought a laptop Toshiba Satellite L50-B-166. After a few days everything was fine for about three days, neither Skype nor the device built-in photo active again. The driver in Device Manager, work correctly and I have two rooms: a Webcam Toshiba HD and a SCPO82.

  I have Windows 64-bit of 8.1.
  Who can he help me, please?

  Try to reset the initial configuration.
  To run the recovery process, switch on and press F12
  Then choose HARD drive recovery

  More details and get the step by step instructions here:
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  I assumed that everything should work again start Notepad with the settings

• Satellite L100: CD/DVD drive is not recognized in the Bios or workstation

  Satellite L100 - 170 No.PSLA3E model 02501QEN under Win XP.

  The icon of the CD/DVD drive has disappeared from the desktop and is not listed in the Device Manager or showing in the BIOS.
  There is power to the drive and the tray ejects OK
  I tried to use the ease of adding new hardware in the Control Panel, but it does not list a CD player.
  I removed the disc and then re - it sitting, but it made no difference.

  I used the restoration of the system for the last available date 26 January 08, but it does not restore the CD player... and I have none, he worked at that time.
  I don't think it's a faulty drive, because he is picking up power and when you insert a CD, it starts as if she was about to read the disc, but nothing appears on the screen.

  The laptop belongs to a child with autism and all I can get out he is "I don't know" when asked what happened to the laptop.
  Sorry I don't have any other information.

  Can anyone help.

  Thank you

  Jan

  Well, usually if the CD/DVD drive doesn t appear in the BIOS or BIOS cannot recognize the ODD then chances are that the CD/DVD drive is malfunctioning.

  But the best way to check this is a new installation of the OS. You should try to boot from a bootable XP CD.
  If the laptop would be able to boot from the CD, then the material is ok.

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• New HARD drive not recognized by the SAS on PowerEdge T410 controller

  One of the drives has failed on my RAID 1 configuration, so I bought a non-certified dell, Seagate Barracuda 500 GB drive (other readers were 250 GB).

  I turned off the machine and swapped the failed drive with a new one (cable connections)

  When I boot in Sas (SAS 6 ir) controller, it shows that the disk is missing.

  I turned off the server and changed the cables from the primary to the new disk, to see if it would make a difference. None. Watch again ' driving status: missing.

  What I have to buy dell certified readers? I'm doing something wrong? Or is the obsolete RAID controller?

  Any help would be appreciated! My primary hardrive gives signs of failure. I have a picture of him, but I'd like to get it mirrored on my new record ASAP.

  Thank you

  Hello director87

  Go to the RAID properties > manage table > manage Hot Spare disks. You should see a list of all drives that detects the controller. Your RAID 1 drives will be listed as primary and secondary. The new drive should not be anything in the area of the 'State of the drive. Use the arrows to select the new disk and keys to assign it as a spare drive + /. After you assign it as a spare drive it should start to rebuild.

  If you don't see the drive in the list, then check the screen of the SAS topology. If you see in the SAS topology then use CTL D to shoot to the top of the additional options. Let me know if it will allow you to do something to the reader in this screen. If you don't see in SAS topology then it does not appear that the controller is able to communicate properly with this player.

  Thank you

• The new HD does not appear in the bios or in disk management?

  Upgrading to a new computer with win7.  I want to add my old HD as a second HD for the computer.  I installed and connected to the power source and the SATA cable.  The HD may not appear anywhere on the computer.  It is not in disk management or in the bios? Any help would be appreciated.

  Thank you

  Hello

  Sometimes, a 'new' disk is not picked up by Windows. EaseUS Partition Master is a program that I found a workaround, download here: http://download.cnet.com/Easeus-Partition-Master-Free-Edition/3000-2248_4-10863346.html?tag=mncol;1 .

  Once installed, it should recognize your drive and allow you to repartition / reformat to use with Windows 7.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• HP Pavilion dv7-6004ea: new SSD not recognized in the BIOS

  Hi I have a want dv7 and is currently using a 700 GB drive HARD However im upgrading to an SSD

  I bought a Sandisc SSD PLUS 120 GB, I cloned the HDD to the SSD, I see partitions

  in windows Explorer when im running HDD, but when I try to boot from SSD I get an error

  error code (3F2) I ran diagnosis but no result without error of ideas? Thank you

  If you use the Apricorn software and a usb cable to SATA it should work.

  I did it several times without problem, except when I got an SSD that was a problem.

  Replace the original hard drive in the notebook.

  Download the latest version of the firmware from the manufacturer to the SSD and install it.

  Once you have done this, try cloning of the OS for the SSD, reinstall it in Notepad and start on the SSD.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• new ICS updates not macro in the camera settings

  Hello to all I just got updated to new ics 4.1(b)(iv). 0587

  My problem first thing im not getting parameters macros in in camera setiings necessary must focus mode.

  Second thing clear black isn't here. You don't see clear black on setiings menu or in the home menu screen.

  Response to touch all the app is faster good müsch, compared to the earlier.

  see how many of you like new ics thanks sony trying to solve my problems above.

  have you tried focusing on small objects in a scene auto mode? It may take some time to focus and recognize the scene.

  also a way to test the features of the macro mode is to try a barcode scanner app,

• New second HD not recognized Vista the Vostro 1700

  I installed a second hard drive (Western Digital Scorpio WD3200BEVT) in Vostro 1700 my brother (he's handicapped and confined to bed, it is its main source of entertainment). I booted and went through the wizard to set up. It fornatted without problem. Therefore, it appears fine in (Simple basic healthy NTFS) disk management. However the Vista sees in 'computer '. The drive is online.

  What I'm missing here?

  Thank you for two

  
  

• XPS M1530 with new SSD will not identify adapter WLAN 1395

  I just bought a new SSD 128 GB for my old workhorse XPS M1530, installed a clean VISTA Ultimate 32 bit OS since the original DVD supplied with the laptop.  Everything works except the wireless 1395 adapter.

  I know that the material of the wifi card is good, because wifi still works when I put the old 64 GB SSD back in. I use the same version of WLAN driver on the new facility.  Device Manager indicates that the adapter is installed and working properly.  Yet the computer with the new SSD does not recognize that the wireless network adapter is installed and activated.

  I use the WLAN driver and BIOS version recommended Support Dell for my service number.  These are the same versions that I have on the former SSDS.

  I'm tempted to reformat the new SSD and start all over again, but that takes a lot of time to reinstall everything. And I wouldn't waste 10 GB on the new SSD to install the recovery partition on the new SSD which lies on the former SSDS and do a restore on the new SSD.  I have more certain supplied software preinstalled on your laptop.

  Gene

  I made an another clean install of the operating system on the new SSD, and this time, I found and used the Drivers and Utilities of original disc that came with the laptop to install the DELL software system utility first.  That did the trick, because when I installed the drivers of that era, the WLAN 1395 works.

  Now I have a space wasting a 22 Gb Windows.old directory, but I am happy.  I'm going to reformat the drive in the morning then it is plugged to my laptop in an external USB SATA drive enclosure and start with a clean car and redo the OS install again, this time properly.

  It's a bit ironic that the DELL system software utility has not been showing available for my service on the support.dell.com site tag.

  Lesson learned.  I'll post tomorrow how the last OS install goes on the SSD clean and new.

  Gene

  Gene

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings