Satellite L500 - screen is completely black after stand-by

I have a L500 and after that my computer is on standby, the tried to reactivate it. Now it will not display anything on the screen its completely black and have no idea of what should happen or do.

Can anyone help?



You see something on a screen? The internal screen is probably defective, so you don t see anything.

If an external monitor stays black I would try to remove the battery and unplug the AC adapter. Then wait at least one or all the night. Now connect the AC adapter and install the battery. Before you turn on the laptop, make sure that the battery is fully charged. Now, try to start your laptop and check what is happening.

In the worst case it serious hardware malfunction and that means that you would need professional assistance service authorized in your country.

Tags: Toshiba

Similar Questions

  • Satellite A500 - screen is completely black

    I got my laptop Satellite A500 for about 4 months and already there is a problem with it.

    After that I had played a few MMO on it for a while so I decided to power out of the night. The next day I started my A500 and there was a completely gray screen and I waited for at least half an hour before holding the power button for 6 seconds just to restart, so when my A500 started to the top of the screen was completely black, but the power LED light was off, but the only lights which were the key commands on the Panel next to the screen and the power light to indicate that it carried out.

    After several tries, the problem had been held, is anyway to fix this?

    Hi mate,

    Have you plugged an external monitor? I mean without it it's hard to say what causes this problem, but I guess that he associated material s. So if the external proceedings, I think that only the internal display is the cause maybe the FL inverter?

    Anyway, in both cases you need assistance from an authorized service provider. Guys can check your laptop and fix it for you. :)

  • Tecra M3 - when the motorized screen is completely black

    Hi all

    I really need help with this one!
    I plugged my tour through an S-video to a flat screen and watched a movie and throughout the film, everything worked very well. I stopped regular and normal. Went home and it start and started regularly and I go into my profile and startup programs started running; It froze!

    The mouse icon was surrounded in a cube that was slightly shaded vertical lines. I restarted my computer and as it started showing the logo "XP" when it starts, it displays blue line oriented vertically once more but in the whole of the totality of the screen in groups of 4, all the corners of the screen, then when it is supposed to display your profile to choose to sign in there went blue and showed and error gives me enough time to read and stop.
    When restarting again the screen is completely black and never displays anything.

    I am able to connect via s-video for device that never to see the picture or just a regular screen but the problem now is that it shows these crazy characters across the screen as a sign with the point on top and courses I m able to do the options because I'm familiar with computers , but it does not allow to run regularly.

    I need help please this situation!


    Akuma's right, if you have the same problem on an external monitor s seems to be that the motherboard or the graphics chip is defective and must be replaced.

    In your case I would contact an ASP. They can check your laptop and swap the motherboard. decision-making supported downloads & => find an authorized service provider

    Good bye

  • The button on my lockscreen does not work on my phone. Recently, my screen went completely black. I can turn on siri. How can I get my screen to turn back?

    My 5 IPhone lockscreen button does not work so I use touch help to the screen power off and screenshot. As I was using my phone my screen went completely black. I tried to plug it into a charger and call but the screen still won't turn. My phone vibrates when I call and I can't turn on siri. I tried to search the Internet on how to re-enable it. Everything I've seen involves using the screen lock button but obviously I can not use it. How do I reactivate it?

    Hello tumbler3100,

    Thank you for using communities Support from Apple!

    I understand that your iPhone screen is returned while you were using it and the on/standby button does more either. Because your iPhone is always vibrate when you call and you are able to use Siri, it seems there is a problem with the backlight on your iPhone.

    Because you have a separate hardware two related issues going on with your iPhone, I suggest putting your iPhone in an Apple Retail Store or Apple authorized service for an assessment of your device provider. More information about these options can be found in the following link.

    Apple - Support - Service Response Center

    See you soon!

  • Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver


    I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

    I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
    The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

    The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

    Now, I can't play games or watch movies.
    Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

    I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

    If I try to put it above it is always black.
    Can someone help me?

    Thank you very much


    First of all, you should visit this Australian page from Toshiba:
    You will find all the drivers for this model of laptop.

    I checked and found that there is a BIOS v2.5.
    Check if the BIOS needs to be updated (if the older BIOS is installed)

    In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
    Install it!

    Last but not least the Win XP should be updated to the latest state!

  • Re: Satellite L500 - Wifi does not work after Windows Update

    The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

    I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

    This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.


    For Satellite L500, there are already some threads here in the forum:

    Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

  • When the computor screen projector turns black after hitting fn F8 and screen projector flashes

    When you use a projector my computor screen turns black after hitting the fn F8 and screen projector flashes in and out, how to fix?

    It never worked correctly?
    If Yes
    Did you change since then?
    You can use system restore to revert to this point?
    If not.
    You try to play on the computer and the projector at the same time? What happens if you just play through the projector?
    Try to update your driver for graphics card via the laptop manufacturers site or the manufacturer of the graphics card if a desktop computer, do not use windows update.
    Update DirectX
    Reduce the graphics acceleration of the map -
    Disable other programs running.

  • Satellite L500 - screen is blank

    Off normally last night, when I turned it on today the screen remains empty. I plugged it up to external montior and that works very well, I have only checked in the Manager device and theres no conflict not showing. The screen is not black, it's like the backlight is he more gray work as soon as the computer is turned on. Also, when I try to change the resolution using the external monitor, the screen flickers like its trying to change but he always comes back to gray.

    Any ideas? Laptop is only 18 months old with minimal use.

    Hi Outkast_IRE,

    > I have hooked up to montior external and works fine
    It was very good, that you did this because if you check if the problem is related to the internal monitor or graphics card.

    Now it s something with monitor internal and it could be the cable, LCD panel itself or something else. More accurate diagnosis is not possible and can be done in an authorized service so you should get in touch with the laptop technicians.

    On the Toshiba Web site, there is a list with all FSA. Give them a call or write an email and they will tell you what to do now.

  • Satellite C660 - battery is completely discharged after three days

    I c660-1te and the battery is completely discharged after three days when Notepad in * power off (NOT in standby or Hibernate) * State. I can't find any option "usb charge" in a bios to turn it off. Wake on LAN (WOL) feature is disable.

    I do not understand why battery life is so short?
    How can I control to turn off all devices on my laptop?


    The WOL option should be disabled in Device Manager-> LAN card-> properties-> Advanced tab

    USB sleep and charge are in the utility of Toshiba HWSetup.
    Check all programs > Toshiba

    But it is available only if the laptop would support this function.

  • My laptop screen went completely black when I plugged in the charger. Help, please!

    My dough went critical at seven percent (7%) last night and I went down to the charger plugged it. The screen is totally black, but its still on.

    PS. It is not a problem of screen brightness.

    A concerned customer.

    You need to make a diagnosis.

    If your laptop has a VGA video port, try connecting a monitor to it.

    Have you tried a full stop and restart?  Stop, remove the battery.  Hold the button for 7 seconds.  Now, without the battery, a power.  If this brings a screen, stop it again and re - install the battery and try again.

    Until you can provide more specific information, no one will be able to help you.

  • Satellite L500-1XM - go to black screen


    After about 30 minutes of being on, my laptop screen goes black, laptop turns on but nothing happens, I have to turn off and restart, but same thing happens again.

    I hope someone can help

    Thank you


    Would it be possible that the laptop enters hibernation (or sleep) mode after 30 min?

    Did you check the settings of power windows to stop the display and hibernation mentioned plan / sleep mode?

    From my point of view there not a lot of reasons why the display should be turned off after 30 min.
    It is controlled and put in windows power options or there is a problem with the system.

  • Screen 5600ea - completely black HP Omni 10 after crash while on the remote desktop connection

    I hope someone can help me with this.

    I had updated my Omni 10 to Windows Pro 8.1 so that I can Office remotely on my tablet on my work lan to get the benefits of the 2013 Office (we have not this version to work) on my work PC.

    Anyway, while it is connected to my 10 Omni via desktop remotely my Omni 10 crashed after connecting a USB drive that is powered via a USB OTG adapter. I used the front adapter without any problem with the USB card readers bus-powered and also the Lan USB card so I know it works, and the outlet powered USB hard drive works on my PC without any problem.

    The Omni disconnected from the remote desktop, and I guess it crashed, but the screen is black even when I hold down the power button and wait for the vibration (which usually means that it is set to zero).

    There is nothing displayed on screen, my work PC is unable to connect via Remote Desktop, and any number of power cycles seems to relive.

    I tried with the attached Omni 10 charger and without.

    There is no HP logo involve restarting at any point, but the Windows key infiltrates a vibration when I push on it.

    While enjoying the fact that the Omni 10 comes with the base Windows 8.1 and not Pro so I changed the configuration it worked fine for a few weeks since the installation.

    Pointers on getting this thing to life would be appreciated.

    Thanks in advance.

    I returned to the store that I bought, and they sent to HP for warranty repair.

    28 days ago so I went back to the store and they gave me a brand new boxed 10 Omni processor.

    When I got home I installed the driver and Windows updates. I noticed that the WiFi reception was really bad, even right next to my router, and the cameras had lines on the screen and the pictures that I took.

    The next day I went back to the store and they said all that and they initially said that I have to wait another 28 days, while it went for repair. When I said that this was not acceptable, they gave me a full refund of the amount that I had paid and used that to purchase a Pro of Microsoft Surface.

    The Microsoft Surface Pro is fast, well doneand more importantly everything works.




    I'm done with lag, unstable and downright unreliable HP products.

  • Satellite M30X: Screen doesn't work after sleep mode

    I own Satellite M30X (model) after I left the laptop on while awhile, the computer went on standby to fashion. When I turned it on, the screen does not work, everything else is ok. I use the external monitor to the laptop. Everything seems to be in the order outside the screen. I did a system recovery and still the same problem. I don't know if it's a hardware or software problem.

    I know the screen works, because you can see roughly. It seems to me that the screen is always on standby.

    Is there anything I can do to fix this problem?


    @marc.andres: If you n t no contrast on the screen have so try to use the FN + F7 key

  • Satellite A500 - screen suddenly goes black with a continuous noise

    I have a Satellite A500 age of 2 months - so I'm working on it, screen goes black and there is a continuous noise until I have shut it down manually. What happened a couple of times. No error message.

    I just know that if anyone had this problem or knows what it is before you contact the retailer or Toshiba, if this is the best route to go.

    Thank you


    I also own a500 but isn't a problem like yours. I got a blue screen and stop message driver responding. Have you tried to reset to factory settings (F8)? also try to update a graphics driver: _ whql.exe

    It is not the page of the Toshiba driver from I installed it a month ago and given that everything works great. I don't know if this can help, but try.

  • What should I do if my iPhone 5 s screen is completely black (as when he died) but I know that it is fully charged?

    After charging my phone today, I went to work and about an hour after loading, the screen went black as if she was dead. I plugged it in and nothing happened. The charging light is yet to come as it does normally, even when its dead. I tried to turn it extinguished/turned on with the button on the top to the bottom, still nothing. It does not at all and I don't know what to do. Help!

    Hold the power button and the home button at the same time until the Apple logo appears. It might take a minute or two, but just keep pressed the buttons and it should start again right to the top.

    See you soon!

Maybe you are looking for

  • Why can I not use Sync without cookies enabled third pary?

    Why I have to enable third party cookies to use SYNC? I keep off on 'Never', so I don't get a bunch of junk cookies of people or companies that I don't want on my computer. With my settings, most sites require to set a cookie and I can accept or reje

  • I ran Recover and my iMac still does not start.

    My iMac is frozen and will not restart.  I ran recover and repair disk permissions, still won't start.  The progress bar freezes approximately a third of the way across and stops.  Any ideas?

  • the micro-apps widget failed

    HelloI think it is since the update of the pacifier in vain the apps widget in micro apps change. I reset the phone without success.You have an idea?Thank you

  • How to convert files in XPS format in Vista

    I need to know how to change my document files xps files back to normal and get rid of the printer my computer xwriter. I do not download this, it showed. He took over my computer and I can't print anything on my HP printer. No one can seem to tell m

  • Advanced sharing settings

    My windows is [Windows Server 08 R2], I can not turn on the option on all network profiles network discovery. Why? Please give me instructions!