Satellite L500: webcam shows a group's default image - do not live photo

Similar Questions

• Satellite L500 webcam stopped working

  Hi guys,.

  I obtained through Satellite L500, webcam quality is very bad, especially @night time. But suddenly it stop working while I was on windowLive messenger with Windows 7.
  I tried a few settings but does not work. It shows the light but in window have only a green landscape.

  Could you please someone help me?

  > obtained by Satellite L500, webcam quality is very bad, especially @night times

  Check this Toshiba document on the quality of the webcam:

  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  and this one;

  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  Welcome them

• How to operate the Satellite L500 webcam?

  How to open and operate a webcam Toshiba Satellite L500?

  Start preinstalled web Application camera and you have control over the webcam.

• Satellite L500 - Webcam is grainy

  Yes as shown, I have recently purchased a Toshiba satellite L500 on a month and half ago.
  When I used the webcam it was fine, but then, all of a sudden it seems he has turned REALLY grainy, especially when, in low light conditions where it is used to good work and be clear and sharp.

  I tried to uninstall the toshiba webcam software, the driver for the webcam and reinstall both without success. I can say that I have nothing to make this happen. The computer that is running windows vista.

  I uploaded a picture for comparison as to how it was first and how it is now, I hope that someone on this forum can help me to solve this problem without having to climb on toshiba.

  Thanking you in advance for reading and your answers.
  Zach.
  [Comparison of Webcam | http://i50.tinypic.com/2wftslx.jpg]

  (Note on this not too grainy picture sound I have a lamp just next to me, but too low light, it darkens the bunch and will really grainy)

  (I tried to change all the settings I can find any avil is, as you can prob see its less sharp, gritty, and the colors are disabled).

  Hello

  As far as I know the quality of the image depends on the light conditions of the surrounding area.

  Have a look here:
  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  Also check this doc from Toshiba:
  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  You can try to activate the Mode night in the webcam settings.
  To do this check the doc above.

  Welcome them

• Select a single image of a Live Photo Webcam

  I accidentally turned on Live Photos.  I have a dozen of them.  I want to choose the best picture of each of them and to keep only that frame.  I know how to do this with gusts of photos, but how do you go with Photo Live?  Thank you.

  Cindyjk g ' Day,.

  Thank you for using communities of Apple Support.

  I understand that you want to select the best image of Live Photos you've imported into the application Photos of your MacBook Pro. I use my iPhone to take pictures all the time and I can help you.

  For now, it is not possible to select individual images in a Photo to live as you can picture out loud.

  More information on Live Photos are in the Photo help manual.

  Best regards.

• Satellite X 200: The cloned on my TV image is not to scale

  I have connected my x 200 laptop to my TV plasma via HDMI cable.
  After much deliberation, I managed to find a way to get the sound through the TV.

  However, the image appearing on the TV is slightly out of scale. that is the picture on the TV is slightly too big, so all four corners are missing.

  Any suggestions on how to fix this?

  Concerning

  Hello

  I m not a X 200 owner, but I guess this unit uses the graphics card from NVIDIA.
  So I think that this problem is only related to incorrect settings in the nVidia control panel.

  I can't provide you with a solution exactly but I would recommend to check the settings in the control panel-> Nvidia Control Panel-> video & TV.
  You can change the view Advanced through the unique options.

  Good luck

• No output HMDI Sound of Satellite L500-1XD

  I have a satellite L500 - 1xd

  I plugged on HDTV & image is great, but have no sound.
  When I checked the user manual it suggested that I go into the Realtek HD Audio Manager and to change the device default to something else, but there is no option that is available to me.

  Am I missing something?

  Read this

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  This is for Vista but can be applied for Win 7 too

• How to recover Vista on Satellite L500

  Hello guys,.

  I bought a Satellite L500 with Windows Vista... unfortunately I am not a fan of Vista, so I installed the good old WXP.
  However, I forgot to burn a copy of the version of vista.

  Then I realized that there is no available xp driver by Satellite. So I installed vista drivers. Almost everything has worked, except the graphics drivers.
  My book, of course, now uses default windows graphics drivers, but now everything is distorted.
  Now my question: is there a way to recover Vista? Of course, I have a product key that I have acquired with the purchase of the laptop.
  I also have a Vista CD from my other computer, but it does not accept the product key for the laptop.

  Thanks for your help!

  PS: Sorry for the bad English ;)

  Product key will not help you. This key belongs to the recovery image, that you got with your laptop.
  In my opinion, you have two options:
  # original order Toshiba DVD recovery under https://backupmedia.toshiba.eu/landing.aspx or
  # install Vista using original Microsoft DVD facilities. All necessary drivers, tools and public services should be available on the Toshiba support page.

• Cannot Flash the BIOS on Satellite L500 due to low battery

  Hey all,.

  Obtained as Satellite L500 (PSLS0A-084002) here. I have the battery not charging issue and everything what I find point to an update of the BIOS.

  Of course, there is a new BIOS for download from the drivers of laptops. So I have the file WinPhlash "sl500 (mv) _bios_w210.exe. However, by running the fact falling before flashing the BIOS with an error number: 144.

  It is because of the battery is bellow 10% charge however I can't it above 10 percent fee that the laptop does not recognize it.

  There must be a way of to WinPhlash running without check. I read that you can run it with the "/ forceit" switch and who will be ignoring the error, but that was for some time and it seems WinPhlash have changed this as she always spits the error.

  I read running back help but after creating a boot cd back, he claims the exe cannot be run from BACK (ffffuuuuuuuu!).

  Any help appreciated. Thank you =).

  Maybe it sounds silly now but there at - it something serious, why you want to update the BIOS on your machine? I mean if everything is OK, why do you need new BIOS?

  In any case, I'm don't know if this will help but please try to remove the battery and check if the update of the BIOS starts if your laptop works on AC only.

• Satellite L500: Revovery Vista needs more than 8 - Win 7 takes about 10 h

  Hello

  in my Toshiba Satellite L500 with Vista 64 bit after bad start has not started.
  I try to choose recovery, but his departure +/-7 h and nothing. I try to install win 7, but it takes about 10 hours.

  Then W7 starting about 40 minutes.
  I have no idea what may be wrong.

  Thanks for help

  Maybe the HARD disk works bad 40 min to start system is certainly too long.
  Try to replace the HARD drive and reinstall the system.

  You know how to replace the HARD drive?
  If this is not the case, check this box:
  [Satellite L500 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU0B03210000R01.htm]

  You will need a common HARD SATA 2.5 disk. Its regardless of what rates would support the HARD drive: the 5200 rpm or 7200 RPM is good.

• No sound after installing Windows XP Home on my Satellite L500-EQ

  Hello

  I ' am Sorin from Romania and I have a problem with the audio driver on my Satellite L500-1EQ.
  I download the driver and do not work the sound.
  I have a message with an error.
  I tried several versions for this driver, but nothing happened.

  Can you help me, please?
  Thank you and Merry Christmas!

  Hello Sorin

  Have what version of WXP you installed? SP2 or SP3?

• Satellite L500-1GK - can I change the graphics card?

  HEY! I need help

  I'm a graphic designer and use Satellite L500-1GK. I found that the VGA is not good enough. The resolution is not really good enough for a designer

  Manufacturer of the graphics card: Intel®
  type: Mobile Intel® GMA 4500 M
  memory: available total graphics memory can be up to 1 340 MB with 3 GB of memory and 32-bit operating system system or 1 759 MB with a 64 - bit OS system memory and 4 GB
  memory type: shared

  Is that what I can do to get the best resolution? Whatever he rib that I am able to change the VGA? is there a solution with that can you help me?

  Hello

  Unfortunately it is not possible to change the graphics card. It s fixed/soldered on the motherboard and can't be exchanged. Sorry, but it is not possible to s.

  But if you only need a better resolution of the screen, you can connect an external monitor. Here, you can work with a higher resolution if your monitor supports it.

• Webcam does not work on Satellite L500-1DT

  Recently got a Satellite L500-1DT for my mother who is learning to use a computer for the first time and everything works apart from the webcam integrated, that was a big part of the decision to purchase.

  The blue light comes on and it records sound but no pictures. Also, it does not take the photo or tour and in both cases just shows the image of cloudy sunset which seems to be a default turned on the program. I tried troubleshooting for her, but there is nothing in the help guide that tells you how to solve this problem, if it doesn't work.
  The software is already preloaded when it was purchased (we got it online) and I don't want to uninstall it because I don't think that we have a record.

  Can anyone help?

  Hey Buddy!

  I m not very good but in my opinion you should try to reinstall the driver for the webcam. Just check the Toshiba page for an update:
  http://EU.computers.Toshiba-Europe.com

  But before installing the latest version, first remove the old and reboot the laptop.

  Regarding the disc you want to say, as far as I know Toshiba laptop will not be delivered with the recovery disk. This means that you must create yourself using Toshiba Recovery Disk Creator. This disc contains an image on the factory settings. It is the same version that you have started the laptop, the first time.

  By the way: normally after the first boot, you should get a message of this type. Can you confirm this?

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite L500 - 19 X - Webcam watch dark photo

  I bought a Satellite L500 - 19 X last week only to tackle use it and Windows 7.

  Problem is the webcam is very grainny and the room that I use laptop is bright but the web cam gives the impression that the room is dark. My friend bought the same laptop that me and she has the same problem. The specs are very good in this laptop, so I expect the webcam to show good quality saw too much other webcams on the beaches of Toshibia and quality is much better.

  Is there any suggestions I can try to solve this problem? Thanks in advance also looked at settings stripped around with them no default delivery to zero difference hope once again I could paste a picture to show you, but for some reason, this page allow me a stick on oh well let's hope someone can help

  Thank you mariaandger?  :|

  Hello

  Before you created this thread, have you found it?
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Re: Missing webcam on my Satellite L500-1

  My Toshiba Satellite L500-1 built - in webcam stopped working today. It worked very well, and I made no changes to the system (Windows 7-64 bit), but the camera just stopped working.
  I can't find the camera in Device Manager, he just disappeared. I downloaded the driver and installed it, but nothing happened.

  Any ideas?

  Hi Tania46,

  What you can try is load default settings in the BIOS. You can do this when you press F9 in BIOS, then save the new values.

  Otherwise, I think that Akuma is good and there is a loose connection so contact service provider allowed in your country and ask for help. :)