Satellite L510 - WLAN disconnects after having ejected the disk USB
Hey.
I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.
What's happening:
After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.
I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.
HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.
I would really appreciate if someone could provide any kind of fix for this.
My laptop:
-Satellite L510
-Windows 7 64-bit OS
-pentium (R) dual-core CPU T4500 2.30 GHz
-2 GB of ram
Hi captainmarvel,
Just a simple question: have you tried to update the driver WLAN?
New driver WLAN, you can find on the official website of Toshiba in order to check this!
Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?
Tags: Toshiba
Similar Questions
-
Blue screen after having ejected the error code 1000007e game disc.
Hello, I get the BSOD error message when I eject a game disc every time. It's sort of a stop error message. ::
Error 1000007e, parameter1 c0000005, 80515b9d, parameter3, parameter4 f7bdb930 f7bdbc34 parameter 2.I've updated the drivers for DVD players, and it seems to have worked so far. Thanks to each of you for your help.
Jay -
HP 2000 laptop: laptop of HP 2000 keeps disconnecting after having entered the password
I got this laptop a few weeks ago and it worked fine, but then, weeks later, I type the password. So when I got was about to head on the desk, it somehow disconnected instantly. Then I type the password again, it just said 'Welcome' and vanishes in the background with the battery icon and wifi in the lower left corner. Doing so again, the background is blue, but the icons are still there. I restart the laptop, the same process. Any way I can stop this?
Hello and thanks for the display on the HP support forums. You'll need to do is start in safe mode and do a system restore to before this problem started. An update has made a change in the configuration that is not sitting well or you have installed or updated something which that disliked the system.
HP computers - using the Microsoft System Restore (Windows 8)
Please let me know how things are going.
Thanks again for posting and have a great day.
-
Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.
Hi sal69,
This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.
You can follow the steps mentioned in the link below
You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista
http://support.Microsoft.com/kb/928355
You can download and install the latest service pack on the computer
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.
Thank you.
Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
You can delete this folder to cancel the download.If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
- http://KB.mozillazine.org/Updates_reported_when_running_newest_version
- http://KB.mozillazine.org/Software_Update
Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app" Linux: "/path_to/firefox/updated" Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
-
Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.
If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.
Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.
In Windows 7, you can use a command-line high;
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html -
How install and run Acrobat Pro after having downloaded the trial without checking 'install '?
How install and run Acrobat Pro after having downloaded the trial without checking 'install '?
You can not. You must check 'install' to install and run it.
-
Error Installer of photoshop cs5 "eject the disk image.
I use a mac but already owned a PC, for which I bought Adobe Photoshop cs5 about 4 years ago. I installed photoshop using the disk on my PC after that first of all, I bought the product and I'm now trying to set up on my new mac. However, the Setup program will not open on my mac because when I click on "set - up.exe" it says that my mac cannot open this type of file - which makes sense because I know that if I install on a mac, it should say 'install.app' on the file I'm supposed to open. This leads me to assume that I bought the product to download on a PC instead of a mac, I thought wouldn't matter because I know that you can download the installation program from cs5 photoshop on the adobe Web site, then I can just post my previous purchase of photoshop cs5 using serial number. However, when I download the installer from the website, open the "Adobe Photoshop cs5" file, and then click 'Install', I get an error message which reads "'Install' is corrupted and cannot be opened. You must eject the disk image. "as shown below.
I deleted the program installation and re-uploaded three times now and it comes up with the same message everytime I try to open the installer.
Is it possible to install photoshop cs5 on my mac using the disc that I bought for my pc 4 years ago, although I could not open the file "set - up.exe?
I do something wrong when I try to download photoshop cs5 on the adobe site?
Should I buy a new version of photoshop to install on my mac?
You do not put diesel in a petrol car, and you can't install Windows on a Mac programs... unless you want to install http://www.parallels.com/ "emulator" on your Mac to run Windows programs
At least that the documentation provided with your Windows disk explicitly says that you have a serial number that works also for a Mac version, download the Mac to install it won't hurt, because your serial number does not work
And there is the problem of the old software on a new Mac... read below... which, as I said above, won't help you with a serial number of Windows
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
"installation is damaged and cannot be opened, you must eject the disk image".
After you download the master creative suite 5 and then try to install the load down, I got this message and could not install the load downwards;
"installation is damaged and cannot be opened, you must eject the disk image".
What does that mean?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I'm on a MacBook Pro and after I dl the Suite CS5 Design Standard is what I get: " 'Install' is corrupted and cannot be opened. You must eject the disk image. ". I rebooted my laptop several times and retried several download but it's the same message. What can I do if I can install this new product?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but here are some links that CAN help with old programs
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
Hello...
I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...
I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...
Help, please...
Much thanks
Lisa
< re-titled by host >
The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.
Where do you see the message your computer?
-
'Install' is corrupted and cannot be opened. You must eject the disk image.
Downloaded Photoshop CS5 several times and keep getting this warning: 'Install' is corrupted and cannot be opened. You must eject the disk image. Help!
When you ask a question you will need to provide some basic information
-Forum quick start https://forums.adobe.com/docs/DOC-5601
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Using a full account of computer administrator with read/write permission?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
When you try to install downloaded Photoshop_12_LS1.dmg, an error message "" Install.app"is damaged and cannot be opened. You must eject the disk image. "This has happened on multiple downloads of the dmg. How to fix this, please?
See the link below:
-
'Install' is corrupted and cannot be opened. You must eject the disk image.
'Install' is on the image disk 'DesignStandard_CS5_LS1.dmg '. Safari has downloaded this disk image today at 22:01 from trials3.adobe.com.
Any ideas?
How to open third-party applications to developers not identified in Mac OS X "Mac tips.
-
Just replaced my hard drive in my 6 year macbook pro. Try to install Photoshop CS5. Operating system is up-to-date with the latest and best. I allowed out photoshop on the old hard drive before installing the new.
Now, I downloaded the installation from the adobe Web site package and tried to start the installation. When I do, I get the following error message:
'Install' is corrupted and cannot be opened. You must eject the disk image.
'Install' is on the image disk 'photoshop_12_LS1.dmg '. Safari has downloaded this disk image today at 16:33 from trials2.adobe.com.
Options are 'Cancel' or 'eject the disk image.
What have I done wrong?
It is a common mistake when dealing with Gatekeeper of OSX which, by default, won't take any unsigned as older CS5 of Adobe software applications.
First go to Apple > System Preferences > security & privacy. Under the general tab and on the bottom, the value "allow applications downloaded on the" "Anywhere".
When you have finished and launched Photoshop, set the default value: "Store App and developers trust".
Maybe you are looking for
-
Intel/Pro Wireless hangs at shutdown
Hello worldwhenever I have stop my Toshiba Satellite A 100-151 the Intel/Pro Wireless software crashes and stops the windows xp shutdown process.anyone else with this problem or maybe: How can I solve this problem? Thank you from berlin, GermanyStef
-
A few months ago, I bought my new laptop (Toshiba L350-14F)Now already the hard drive crashed.Because I need the laptop for my work and cannot function without it, I bought a new hard drive installed, placed a top backup. And Yes... to the top and do
-
Family of output voltage on NI PXI6225
I'm running a PXI basket with a NI PXI6225 IO card. I am trying to use the digital output ports, but they seem logical by default to TTL (+ 5V). He appears in the manual I should be able to change this with 3.3V logic but I cannot work on how do it.
-
Threads and passing parameters to it
Hello everyone, now I play with sons and I am wondering how to change the setting to the thread function. I created a thread function is void CVICALLBACK (char id [], char value []) doThread { do something } and I want to call the thread like this Cm
-
WRT54G2 v 1 connectivity problem
I recently had to powercycle my router and modem or my internet to work. Subsequently, my computer can not find the old network, but rather takes the 'linksys' only. What I have to do to find that my former network again because it is not at all.