Satellite L650 - cannot start Office 2010 - icon changed

Similar Questions

• Satellite L650 cannot start

  Guys hope you can help. My laptop model L650 Satellite fell out of my hands at knee height. When I tried to start again I got the message below.
  Check the connection of the cable!
  PXE - M0F: exit Intel PXE ROM
  No boot device - insert boot disk and press any key

  This message occurs if the system cannot detect the HARD drive. Enter the BIOS settings and check if the HARD drive is listed and recognized correctly.

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Cannot start Office Outlook

  Outlook is locked.  I closed it with the Task Manager, but now it will not open under my user name.  Still, my wife can open his.  The error message says "cannot start Office Outlook.  Cannot open the Outlook window. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions in the Forums Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

  {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

  This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

  Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

  ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

  Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

  I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

  Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

  This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

  Thank you!
  David
  Edinburgh, UK

  Hello

  I think the password loss is the BIOS password.
  I m wondering why this password is displayed when starting if you have not set it

  However, the point is that the BIOS password can be removed if you n t know this password.
  Unknown BIOS password can be removed by a Toshiba authorized service partner.

• Satellite L650 periodically starts

  I recently bought a laptop Toshiba Satellite L650 with Win7.
  He worked for a few days and then periodically wouldn't start upward.
  Can help you? I installed only anti-virus application.

  Hello

  I recommend the HARD drive recovery procedure that helps you define the computer laptop back to factory settings.

  Then you need to test the laptop once more, in my opinion, this should be done first because it of really difficult to tell if the problem is hardware or software related both recovery would provide more information

• Cannot start OneNote 2010 app

  C:\Program Files\Microsoft Office\Office14\ONENOTE. EXE

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  This window above message continues to appear whenever I want to launch Microsoft OneNote 2010 on my Samsung ATIV the SmartPC Pro. All other Microsoft Office 2010 applications work like Word and PowerPoint. I'm on Windows 8, which came with the tablet. Its 32-bit. The first time I installed Microsoft Office 2010, OneNote open correctly. I used it once. The next time I tried to launch it, this message popped up, and yet I have nothing done. This problem occurred after a Windows automatic update (it might wear). I tried to reinstall Microsoft Office 2010, but nothing has worked. Someone knows what to do? Thanks in advance.

• Re: Satellite A210 - cannot start and how can I backup my data?

  Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

  No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

  This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

  I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

  Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

  Any help is very appreciated!

  Thank you.

  If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
  I think the only way is to reinstall Vista.

  The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
  In addition, you always get a reminder message that you must burn this image to a DVD:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  However, now it is too late to burn the recovery disc.
  In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
  Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

  If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
  To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

  I hope I could help you.

• Cannot convert Office 2010 documents with PDF Converter

  I recently installed Office 2010 Professional on my computer from the operating system on Windows XP SP3. Before you install Office 2010, I got the Adobe PDF 6.0 Reader and converter of documents already installed on my computer, with which I could easily convert PDF files to office documents. But after I installed Office Professional 2010 on my computer, I don't see the buttons on the Office Word or Execl or Power Point applications PDF and am not able to convert all PDF documents. Can someone help me please?

  In Word 2010, select file, save as and click the down arrow to the right to register under and select the pdf option in the drop down menuu.

• Satellite C660-1N1 - MS OFFICE 2010 starter GONE

  Hello

  Just before I return this piece of sss... to the shop, I ask you for help. I recently bought the TOSHIBA Satellite C660-1N1. I got a MS OFFICE STARTER... (Oh, it's nice, I think).

  After you install the software from the hard drive, I tried hard to use the thing for a few days. Due to some problems, I decided to uninstall it with an idea to install or reinstall once more.
  BUT I HAVE NO IDEA where the configuration file. Maybe the particion of recovery?

  Question 1: Is it possible that the installation of MS Office starter files are stored there?
  Question 2: How the hell can I enter / start / open this particion recovery?

  Please help, I'm really desperate...

  Thanks in advance.

  > Question 1: is it possible that the installation of MS Office starter files are stored there?

  Lol you can't install them separately because the MS Office starter pack is part of the image of Toshiba. The image is a package that contains the Windows operating system, a tool of Toshiba, drivers and 3rd party software as WinDVD, office, etc.
  So if you want to get that back, you need to install the image of Toshiba once again or you define the BONES to the point prior to the MS Office has been uninstalled.

  > Question 2: how the hell can I enter / start / open this particion recovery?
  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  I also recommend the manual pre-installed.
  You will find some info about Toshiba Recovery and how to create a recovery disk which is very important in the event that something goes wrong with the HARD drive

• Re: Satellite C850 - cannot start windows 8.1

  Hello

  I have reset clean my Toshiba Satellite C850 with USB windows 8.1 but now if I start the laptop on it happens has this code 0 xC0000001.
  I can not start safe mode cannot use advocatus.

  Help, please

  Hello

  Have you installed original recovery image that you created on the USB key?

  Please try to install it again. Usually after installation of the own image of recovery your laptop should boot correctly.

  By the way: have you noticed this problem right after the installation, or later after some updates to install.

  Have you tried to solve it using Windows start-up settings?

• Satellite C650 cannot start Windows

  Hi and thanks for reading this post.

  I had a Satellite C650 laptop with Windows 7 and inside the h2o bios, works fine for about a year now. The problem, as this post came yesterday when I was using the laptop as usual. At one point, it seemed that the computer worked very hard (fan noise, could not click on anything) and it lasted about a minute or two until what I tried Ctrl + Alt + Delete, who don't do anything. 5 minutes later an error window pops up saying that CTRL + Atl + Del could not be run at this time. I could not click on anything whatsoever and a s Malwarebyte (anti-malware software) had opened, although I couldn't read what he says since I couldn't click on anything. I held the power until the computer closed and proceeded to restart.

  A window asking me if I wanted to start windows normally, I said yes, but after the Toshiba usual loading screen, nothing happened (blue screen dark without the usual windows start icon) I left it running for 15 minutes, but still nothing. He retried a couple of times off the computer with the power button (this time is not to ask me if I wanted to run windows normally) and still the same thing.

  For some strange reason, I can not start mode safe mode using f8 because f8 simply do nothing. Tried the f2 boot configuration, but nothing seems to be no relief at the moment.

  Thanks a lot if you can provide some tips on how to solve this problem.

  -Vincent

  Hello

  Pressing F2 should allow you to access the BIOS.
  The F2 key must be pressed immediately after that the laptop has been powered.
  It work? You can access the BIOS?

  If this is not possible, you can pass the hypothesis that this could be a hardware problem.
  In the worst cases that the motherboard may be affected or device connected to the motherboard as RAM.

  Solution? Good RAM could be verified using new modules, but if you have no spare parts available for this test, then I recommend to ask a technician for verification of material.

  Your warranty is valid? If so, don t waste time and get in touch with the service people.

• Satellite T130 - cannot start the Toshiba HDD recovery

  Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

  Thank you

  Hey Buddy,

  How are you trying to start the HARD drive recovery process?

  The full HARD drive recovery procedure is described here, so please check this article:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Satellite L650 - cannot restart to factory setting by pressing '0'

  I pressed the 'zero', then, by pressure, turn on my L650. I want to restore it to the factory setting. He began to make a noise (3 to 5 min). When I called the '0' key, windows starts and Desktp appears as always!

  I ve tried several times and it does nothing! I also tried with F8, but it's the same thing...

  Why I can't access the menu restore? !!!

  Thank you!

  If you have the European model for laptop, it works with F8. With the help of F8, you should be able to get into the Advanced Boot options. You can enter these options?