Satellite L650D-101 - cannot insert the cards correctly

Similar Questions

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.

• 5 d mk iii cannot recognize the card

  There has been recently a few good photos with my 5 d mk iiii allwent. Put the card in the reader and photos uploaded to the computer. Then put card back in camera tried to refomat and not go. message says cannot read the card or reformat. tried another card the same results. using lexar 32gig 1066 anyhelp

  Inspect the card (with card removed) Bay.  There are pins bent at the bottom of the card slot?

• Satellite P200-1FY cannot get the ATI video card "recognized" by Vista

  I reinstalled a U.S. version of Vista on a Satellite P200-1FY, and I can't get the ATI card working. ATI catalyst software is installed correctly, but in Device Manager the display driver is always "Standart VGA graphics card.

  I tried to download drivers ATI the Toshiba and the site Web of AMD, but it makes no difference.
  What I am doing wrong to get the video card work?

  Help, please

  Thanks in advance,
  Joannas

  Hello

  This Satellite P200-1FY belongs to the series of PSPB6E and was delivered with the graphics card from ATI Mobility Radeon X 2600 (name of code M76).

  Please use this page to European Toshiba driver download driver;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

  There are different series of P200. As already mentioned this notebook belongs to the series of PSPB6E and why you must choose that number of the upload form.

  It seems that the ATI v8.432 display driver has changed the 14.01.2008

• Re: Satellite A200-28 cannot read the SD card of the digital camera

  Hello

  I just tried to get my laptop Satellite A200-28 to read my camera, an SD card and it happens in the card reader, but nothing happens.

  To what extent do you have to press or on my desktop, is not go very far before the card starts to blink and it opens the contents of the card. But on my laptop nothing.
  Just, it lets you put the card in but does not seem to realize is there actually.

  Any help on this would be much appreciated as it would be so great could receive laptop to read my camera card as easily as my office.

  Debbie

  :) Thanks for your comments buddy!
  Good to know that you resolved your own

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• Satellite M60-176: cannot install the graphics driver

  Greetings,
  I'm trying to reinstall the original driver from Toshiba site
  on a satellite M60-176 disabled ATI X 700 256 MB dedicated

  version is:
  Driver VGA (ATI M24C/M26P)
  V8.121.050322a - 021880C
  Driver VGA (ATI M24C/M26P)

  The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

  When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

  I tried to follow the sequence as:
  uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

  I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

  TOSHIBA support put me to BIOS 1.60 level: same problem

  I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

  Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

  I'm really ask for help, because I do not know how...
  Kind regards
  Ludovic

  Hello

  What happens if you install the operating system from the Toshiba Recovery CD?
  This CD also contains the ATI graphics driver.
  How about installation of the graphics driver on the site omegadrivers.net?

  But I must say that it is very strange question. The driver from the Toshiba site should work.

• Try to import photos from a card SD Driver seems to work ok. When I insert the card, nothing happens. Help

  Built in SD reader but auto play does not appear

  Built in SD reader but auto play does not appear

  =====================================
  Perhaps the following would offer a few ideas:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following alternative may be worth a try:

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer...
  the card reader is listed as one or more removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download the files from here. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the files of your choice in a folder on your hard drive
  drive.

  Just click with the right button on a group of selected files and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

• Satellite C660-15 cannot install the update of wireless lan

  I receive a notice indicating that my wireless lan driver should be updated. I followed the instructions and know which unit my laptop (Realtek: RTL8188CE) and download the appropriate driver software. It appears as a zip file in my downloads folder. I unzip and then what?

  Read the instructions Dutch (although I prefer English on notice that download and update the driver) it is said to look for a readme file (they are all very old, since 2010, none in 2011). Really they don't say anything about what to do. In Dutch, he also says to click on SETUP. I find one that is marked as an application, so I double click that.

  It runs, and then on the screen it says something like: "the software may or may not have installed correctly". So I click on it to install it again. Same thing.

  I had no idea if it installed correctly or not, so I clicked on the features of network/system/control panel (?) / Realtek... and right-click to see which version of the device driver is there and it has not changed.

  So, what should I do to get this new driver works correctly?

  I tried several times and it doesn't work right. It becomes very frustrating and there seems to be no way to contact Toshiba support, other than through this forum (which is users rather than support from Toshiba, I think).

  Help, please.

  cjbbrussels

  Try to install the driver using the old-school method.

  Enter the card WLAN (Device Manager) properties > driver > Update driver and browse to the RTL_Driver folder. Choose the folder 7 x 64 or 7 x 78, according to the version of the OS you are using.

  I think that it will install the driver.

  By the way: If your WLAN is working properly you should not install this driver.

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite P100 locks after inserting the DVD + RW disc

  My P100 crashes after inserting the dvd + rw disc.
  If I turn on the computer with the floppy disk in the drive (in general), it works.
  I use the wrong type of dvd.
  Can you advise?

  Hello

  There are many different models of Satellite P100, and I think that the units were delivered with different drives.
  But if the laptop came with DL reader so it should also could handle the DVD + RW.

  Does happen with different DVD + RW from different manufacturers?
  I think that in the manual you will find a list with tested and compatible media that you can use.
  This list, I found in the user manual on my satellite.

• Satellite L30-101: System indicates the value of memory bad

  Hello

  I hope someone can help. Just bought the L30-101 with Vista Home Basic and 512ram (ddr2 pc2 4200). The specs say it can take up to 2 gig with a max of 1 gig per slot.

  Site of Crucial ram and there memory Advisor tool used for a stick of compatible 1 gig to another location of the source and bought a stick of 1 GB (ddr2 pc2 4200). It was put in the laptop, but instead to show 1.5 GB of ram it showed only a little more than 900 MB - so he was recognizing the new stick and using a small part for shared graphics etc. but was totally ignoring the original 512 stick.

  I tried move but opposing slots always get the same result. Also tried the two sticks separately and work well on their own, but when the two haven't inserted the 1 gig stick seems to be recognized. Is this a compatibility issue?

  Ive tried to contact crucial themselves, but still have had no response, so thought I would try and choose someones brains here.

  Any ideas anyone?
  See you soon
  Nick

  Post edited by: silverback0001

  This is a compatibility issue, I think you should get a new memory.

  Sometimes it's a problem if you use different modules (size, brand, speed).
  Usually, these problems are presented if you have a noname memory.

  You must purchase another module of 1 GB instead of this the 512ram or replace the 1 GB with a new key.

  I've heard a user has how Kingmax and Samsung 512 MB 1 GB of ram in the L30 and everything is going well, he has no problem with him.
  I have two Samsung 512 MB modules and have no problem.

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite A660-07U - cannot install the new display driver

  When I got to my laptop, it wouldn't even start the box! So I googled how to get operational and it wouldn't install Windows 7 32 bit, so I installed Windows 7 64 bit and that worked.

  I am one of the users who is also having their laptop freeze on them at all times. I did the update to the Bios and it always does. So I decided to try to update the graphics drivers with new ones on this site, but it seems that they won't install. I got 64-bit drivers for Windows 7 first, I have Windows 7 64 bit installed in my laptop. But it cannot find the necessary material, I thought, he says its because my laptop is not a 3D version, should even elsewhere?

  So then I tried the 32 bit drivers and it says im using the wrong system operating system for these drivers.

  How about if some drivers I can use?

  Hello

  A moment I really t understand: why you have your own version of Windows 7?
  Usually by Satellite A660 is always equipped with operating system (Windows 7) and it s already preinstalled. This means that you can start your computer laptop out of the box and Windows 7 will begin. Therefore, you don't need an additional installation.
  And let me guess: you don t have created a right Toshiba Recovery disk?

  In any case, before update you the display driver you must remove the older version first. Then, restart your computer and install the latest version.

• Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

  Hello

  I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
  I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

  However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

  Thank you

  Jack

  Hmm. I wonder about the 8 GB card Micro SD.
  As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
  Usually the laptop card reader s should recognize either large 4 GB microSD cards.

  However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

  See you soon