Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

Similar Questions

• Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

  Hello

  I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

  After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

  While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

  Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

  Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
  Am I wrong?

  I noticed that Toshiba has released a new version of the Intel graphics driver.
  At this time the update is 02/20/08 and the version is 6.14.10.4831.

  Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

  I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

  Mate good luck

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite Pro L40: Cannot use special characters in the password Bios

  Hello

  Why I can't use special charters on password bios?

  If I but of special charters on password, System don't use the exp.
  Password: * Aur! nk0 system seems only * Aurnk0 * and do not give errors when I put the password!

  I hope that this case of fixed security...

  ARO
  Mikko

  Hello

  This isn't some sort of bug BIOS but you can only use letters and numbers for the BIOS password!

  You visit the user guide for the details!

• Satellite Pro A300D - SATA mode disappeared in end update BIOS

  In version 1.9 of the PSAK1E A300D bios there are settings to change the mode of the SATA controller. After updating the BIOS, it disappears. The cell phone was in non-AHCI mode before the update and now it is stuck there. Anyone got the old BIOS at hand (my backup is long gone)? It will completely go AWOL if I downgrade the BIOS version?

  Hey Buddy,

  Have you downloaded the right version of the BIOS of your laptop or another model?

  You should also try to load the default settings in the BIOS (F9).
  Check this box!

  To be hoenst I can t imagine that this option is no longer available on newer BIOS version

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Satellite Pro U200: Cannot use TABLET TACTILE power utility

  Hi guys, help me please.

  My computer gives me this error message "'THotKey' recovery failed. "Error code: 0 x 00031402, 0x00000002" and with it, I can't use my Fn key and when I try to open the folder of toshiba, it gives me the same message.

  Could you please help.

  Thank you

  Maiko

  Hello Maiko

  It will be interesting to know since when this error occurs. Try to roll back OS to an earlier time using System Restore tool. Maybe after that that the problem will be solved. If this isn't the case, please post again.

  One last thing: you can also try to install common modules again. You can find it on the download page of Toshiba.

• Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

  Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

  > WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
  If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

  The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

  Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

  You have Realtek so use windows own zero configuration WLan!

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?

• Toshiba Satellite Pro M30 cannot use USB 2.0

  I can't use USB 2.0 on my laptop (OS = Windows 2000).
  Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

  Greetings

  Hello

  Have you seen yellow errors such as exclamation points in Device Manager?
  If not, in this case it of not necessary to install all the drivers.
  Moreover, the operating system automatically recognizes the USB ports.

  But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
  In this case you need an external power supply for this part or you try to use the USB hub.

  Good bye

• Cannot use my ipad after update 9.3

  Hi, I can no longer access my apple ID and forgot the password ID and yahoo mails. Y at - there no way how to access my ipad? He said ' ipad relates to one apple ID.» "Enter the apple ID and password that were used to set up the iPAD C * 2yahoo.com ' Please help.thanks

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

  Hi, I need help!

  computer laptop, tested just got everything ok with Vista business and everything works fine.
  Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

  Restarted the laptop with the bios disk selected bios XP and everything seems ok.
  The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
  Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

  Now does not start, so what do I do to get this thing working again?

  Hey Buddy...

  This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

  I hope that the ROM module must be flashed again.

  This can be done only by an authorized service provider.
  I see no other solution for contact ASP in your country and ask for help and handling.

  Good luck and best regards

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Satellite A200 - 1 M 7: request password after update Bios

  I have PC Satellite A200 - 1 M 7.
  I downloaded the update of BIOS, installed.

  After completing the installation application password PC (I have had no password on the front).
  BIOS is also asking password.

  Can you help me?

  It's strange, but a BIOS password can only be deleted an ASP.

  In your case I find the nearest ASP and ask for help.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite A100: Error power USB from standby after update BIOS 5.20

  Hello

  I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade

  I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but only when the computer comes out of standby

  The error message tells me that "a USB device has exceeded the limits of its hub port power.

  I have nothing connected to one of the USB ports

  I talked to guys tech at length to Toshiba, but they can't seem to explain or correct the problem - a same thought it could be a motherboard problem, but cut which like the timing is too coincidental to be something other than the upgrade of the BIOS.

  If anyone knows a fix, so I would be grateful - is - it possible to find a previous BIOS and roll back from 5.20

  I guess if it's the BIOS, then when they deliver another it will correct itself?

  Comments appreciated

  Phil

  Hello Phil

  Maybe again the stupid question, but I also want to know why you made the decision to do the BIOS update? Is there a particular reason or you just want to have laptop with the latest version of the BIOS.