Satellite L750 - cannot reboot from CD

Similar Questions

• Satellite L750 - cannot connect to the wireless network found

  I am the owner of the Satellite L750-1ñ3 and I installed atheros wlan drivers for my toshiba. But when I try to connect to my network which is protected by wep key and I enter my key I get an error from the key or password is incorrect.

  I correct wep key entry because it works on my Tablet PC.
  In addition to the wirless led light is constantly orange on laptop, even now.

  I put t really help now. Fact is that WLAN on your laptop works well if you can detect your home WLAN.

  To check the protection to disable the feature for a few minutes and try to connect to your laptop without protection key. It work?

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• Satellite L855 - cannot boot from virtual ODD

  After 3 years using pro u400 bought l855. This new find devive cannot start from odd virtual (my zalman ve-200) and understand that my new bios locked device! These drawbacks!

  Hello

  BIOS is able to boot devices out there:
  ODD, FDD USB, primary HARD disk, eSATA, USB memory and Network (LAN)

• Satellite L750 - cannot find HARD drive

  I lost my HARD drive and I can't go into what anyone with the exception of F2 and F12.

  Help, please

  Hello

  This means that the HARD drive is not recognized in the BIOS more or how to understand that the HARD drive is lost?

  If the HARD drive is not more recognized need replace it and reinstall the operating system. Satellite L750 is fairly new laptop model, so I think that it s valid warranty and if you contact an authorized service provider, you can get a new HARD drive for free. Simply contact the guy and ask for help, they will replace the HARD drive for you.

  Do you know where you can find the closest to ASP?

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Satellite L750 - receive messages from ordinary this HARD drive is about to fail

  I have a laptop of PSK2YA - 04K 010 L750 Satellite.
  I get regular messages that my hard drive is about to fail.
  I backed up all my important stuff.
  I did not the recovery discs until I started getting these messages.
  I've been able to create a windows repair disc & also recorded an image of the hard drive on an external hard drive with no problem.

  I bought and installed a Western Digital 750Go WD7500BPKT hard drive replacement.
  I tried to do a system restore using the image I created on my external hard drive
  "I get the following message appears a few seconds after the start of the reimage" the operation failed because of a device error encountered with the source or the destination. (0x8078012D)

  I reassembled the original hard drive & make a set 4 DVD discs using the Toshiba Recovery shortcut.
  I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.
  Don't really know where to go now & am hoping to get a few ideas from people in the know or have been here before.

  HHHHeelp please

  > I tried to do a system recovery using the image I created on my external hard drive

  How did you create this image?

  > I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.

  It looks like the 2nd disc can be read correctly or the 2nd disc was not created correctly.

  I first recommend you to clean the lens of the laser of the reader of CD/DVD alcohol or cotton tip.
  Then try to run the installation by using the recovery disk once more.
  In case this isn't possible, your recovery disk is defective.

  If the recovery disk that is faulty, you have an option to order here:
  http://backupmedia.Toshiba.EU/landing.aspx

  The 2nd option would be clean Microsoft Windows disk usage.
  Missing drivers may be downloaded from the Toshiba UE driver page.

• Satellite P100 - cannot boot from recovery CD

  Hello

  I'm trying to reset my Satellite P100.
  She runs slowly and I thought that a clean spring was in order.

  I just received in the mail today my recovery disk (then found my original one!).
  Problem I have is that no matter what I do, I can't do the boot cd.

  No matter what buttons I push on I get or anything and one reboots windows or black screen.
  I tried F12, F1, F2, C, f *, ESC, I changed bios priority support via the configuration utility of the material in the Panel to load the cd first, his pirouettes for awhile and just does nothing.

  Whatever i can't load anything other that windows or a blank black screen, cant even get into safe mode.

  Any help please?

  Hello

  > I just received in the mail today my recovery disk (then found my original one!).
  Have you noticed the same thing using two of them?

• Re: Satellite L310 - cannot start from the HARD disk

  Hello

  My L310 just died on me yesterday. My system just can not start, not even in Safe Mode. And it keeps trying to start using my network card, not through hard drive.

  I put the BIOS default settings, but it does not help.

  And she has this tone to loud continuous beep when it tries to start using the network card. A continuous beep, even on the screen of the BIOS and in safe mode.

  I chose the hard drive manually, but he keeps trying to start through the network adapter.

  And the laptop does not meet the keyboard. Even with a keyboard external usb. When I sometimes managed to boot my system on the rare occasion, I get to the login screen and cannot button my password.

  Does anyone have similar problems?

  Let me know. Thank you!

  Looks like your HARD drive is defective. BIOS recognize it?
  You should test the disk with Drive Fitness Test. Download the CD image, burn it to a CD and boot from it:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Check this box and give us feedback. Maybe the HARD drive needs to be replaced.

  On the keyboard issue it is not easy to say what are the causes of the problem, but in the worst case that he should be replaced also. :(

• Satellite L750 - cannot install OS of the external HARD disk

  My toshiba L750 had the hard drive replaced under warranty. Back attempted to restore the image system and external hard drive, but will not boot from the hard drive.

  I tried the f12 boot method
  I tried the boot select f2 of the 'boot' positions and changed the order Iof startup ie cd hdd and USB and e

  No chance...?

  Advice

  > to restore the image system and external hard drive
  Who told you that you can install the image of the HARD drive recovery?
  In s user guides document is clearly described how recovery your machine and it is written that you must create recovery DVDs.

  Anyway, a long time ago, I saw a thread interesting any similar problem. I n t have the time to search now, but you can use the advanced search option and try to find it. I think it must be somewhere in the forum of recovery category options.

• Satellite L300D - cannot downgrade from Vista to XP

  Yes, I realize that Vista to XP is technically a downgrade but in my current situation, its nothing but an upgrade.

  Right, I have a laptop Toshiba Satellite L300D-PSLC8A.

  I ve only had it for 3 months now and I've experienced various problems with it, the DEP, on the one hand, is a real problem.

  I ve had problems with my hard drive, began to really hurt at some point to the point she would have a continuous loop of repair and just wouldn t start correctly.
  I had it sent back under warranty, thinking it was a hardware failure, but apparently not, blah blah, whatever.

  My main problem right now is that I don't like Vista on this machine and have tried to format / install XP on it, several times, without success, using XP service pack 2, then one, then none

  Each time I boot from the CD, it will start the initialization components needed to launch the formatting and installing XP, gets to the point where it says "starting windows" downstairs, and it blue screens on me, every time.

  Now, I ve tried check disk, virus scans, I even got paranoid after this happening the first time and I have 3 firewall on this machine, but it's just will not work.

  Any suggestions or anything like that would be very useful

  Hello!

  BSOD code means you are using a wrong driver AHCI.

  You integrate the AHCI driver? To the Satellite L300D, you must download the display driver package because there you can find the AHCI driver. Then, copy the drivers on an external floppy drive and load after you have started from the CD by pressing F6. Or allows you to create your own nLite installation disc and then you don't need the external floppy drive. Here you can download: [www.nliteos.com].
  In addition you will find hundreds of discussions here in the forum about this audit as this!

  Alternatively, you can install XP without AHCI drivers if you change the mode in the compatible BIOS. But some users here reported that the AHCI mode is faster

  Good bye

• Satellite A50: Cannot boot from recovery CD

  I have a toshiba satellite a50 when I try and recover back to factory settings, but my computer does not recognize the cd and it does not boot from the cd to recoverey someone help I have explored the cd there is a file with the extension .gho I really need to format my pc

  Insert the CD in your drive.
  Press the power button, then start Notepad.
  Press the C key immediately after starting the laptop to boot from the CD.

• Satellite L750 - cannot complete the installation of Windows

  Just bought new computer initial sart upward and installing Windows.

  Get the loop of the error. "The computer started unexpextedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart, then restart the installation. Whenever I click ok to install Windows error reappears.
  Cannot install Windows.

  Maybe the computer back and get a new one?

  Hey,.

  You can already access the Windows Advanced Boot menu and start the recovery of disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Otherwise I agree with and you must return the phone and ask for a replacement. These things shouldn't t generally occur on output from the computer to the box. I m sure that the store will replace it for free. ;)

• Satellite C660-cannot boot from ODD

  Hi all

  hope someone can help me with this.

  I'm trying to put a new hard drive in a C660 but can't the 'boot from cd' option no matter what I do.

  If I press F2, I get the windows boot manager with an option.
  Windows 7

  If I go to F8, I get the advanced boot options.
  SafeMode ect. No CD option

  F12 takes me to Windows error with 2 options recovery
  Start repair installation (recommended)
  Start windows normally

  Also tried 0 on power, which gives just the F2 and F12 options.

  Can someone tell me how to boot from the cd?

  Thank you very much

  * @ Said *.
  I assume you mean the flashing cursor in the upper left corner. Is this OK
  The blinking cursor indicates mostly a drive HARD or RAM problem/failure.
  Check in the BIOS if your HARD drive is recognized correctly.

  In addition, you can use some diagnostic tools such as Windows Drive Fitness Test (WinDFT) and DFT (Drive Fitness Test)
  In case the HARD disk is OK, I would recommend RAM