Satellite L755 - error when uninstalling Bluetooth Stack

___ * Brief_: * when I'm trying to uninstall the battery Bluetooth I get error "error application of transformations. Check that specified transform paths are valid"

* _Details *: _

I have the Satellite L755. It comes with Windows 7. I formatted and installed a fresh copy of Windows 8 Pro.
I installed all windows updates, then I ran Toshiba Windows 8 Upgrade Assistant and installed all of the components.
then after a few days, I've upgraded to 8.1 Windows through the store.
This icon beside the clock did not show the ability to turn on/off bluetooth and also through the settings (in the charm aside), change settings, PC and PC Bluetooth devices as it does not show to enable or disable Bluetooth.
I tried to re - install the battery Bluetooth, it gave an error.
I decided to uninstall the battery Bluetooth and then I get the error: "' error application of changes." Check that specified transform paths are valid"
| installed Revo Uninstaller Pro but no advantage.
I have installed TuneUpUtilities2014 but no advantage.
I installed Wise Registr Cleaner but no advantage.
How can I uninstall it? Help, please?

I checked the Toshiba download page and I see your model of laptop is not supported for Win8.1, just for the upgrade of Win8.

Have you noticed some problems with own preinstalled Win8?

Tags: Toshiba

Similar Questions

  • Driver satellite A100 - 599 (PSAAR) lack BlueTooth STACK

    All the hy

    When I recently downloaded new drivers from the Toshiba support page, I noticed that there is NO BlueTooth stack by Toshiba software! After an hour of research I found on this URL:
    http://APS.toshiba-tro.de/Bluetooth/DirectLink.php?SNR=2

    Please, fix this...

    Oh, I have a Toshiba Satellite A100 - 599 (PSAAR)...

    Best regards, Tadej

    Hello

    Next time before spend you hours for research post here and you will get useful tip. ;)

  • Re: Error with driver Bluetooth Stack on protected Z830

    Error during installation of the Bluetooth stack for Windows 7 (version of 15/05/12): first pilot "Bluetooth USB controller-10" properly installed but the second a "Bluetooth RFBUS" fails.

    Therefore Bluetooth does not work. PC says that it is not enabled (with Fn + F8 or Bluetooth setting running)

    Note: the Atheros driver is up-to-date. I tried with and without the Bluetooth Driver filter Pack 1.0.9.

    What should I do?

    Thank you!

    PS: Protected Z830 PT224E with 64-bit windows 7

    Are you using the original preinstalled OS Hat you got with your Portege?

  • Controller Bluetooth Hp 4540 s - no card detected error when installing bluetooth driver

    I have a Hp 4540 s C4Z09ES #ABB running Win 7 32 bit product number, I installed all the drivers, but in Device Manager is always an exclamation on bluetooth controller and when I try to install a driver for it I get an error that no bluetooth card is installed. If anyone can help

    Driver ID:

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
    PCI\VEN_1814 & DEV_3298 & CC_0D1100
    PCI\VEN_1814 & DEV_3298 & CC_0D11

    Hello:

    You must install the software file and the driver Ralink Bluetooth for this device.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-110019-1

  • NB550D - error when installing Bluetooth

    I installed Windows 7 64 bit on my NB550; the only missing part is battery bluetooth.
    During the installation of coating it of "BT-stack-64 bit - toshiba.zip ' (is of the toshiba Download Center), he's looking for a 'Toshiba RFBUS; pilot' as it is not able to find, the installation fails, and bluetooth driver are not loaded.

    The result is RFBUS & RFCOMM bluetooth driver error in info sytem, with no possibility to use bluetooth.

    Any suggestion on this?

    Hi Fapor,

    Now you see all conflicts in Device Manager?
    Have you tried installing BT once more?

    I would recommend this doing. New battery BT + driver can be downloaded from the portal official Bluetooth site:
    http://APS2.toshiba-tro.de/Bluetooth/

    But before starting with the installation, make sure that you have removed the old version first ;)

  • Re: Satellite L670 - error when starting the BIOS update

    Using the Toshiba Service Station, he warned me an update. The update is called "Satellite L670/L675, Satellite Pro L670, update BIOS Version 1.50". When I install the update, it gives me this error: "there was an error, please check below the elements.» More than 150 BIOS version. Battery capacity more than 10%. AC is attached.

    I tried the update when my battery was 100% and the captain was connected, and yet I still get the error.

    Can someone help me with this?

    Hello

    Firstly I have to say if you don t have any problems with your computer forget this update. BIOS update is required only if you really have problems, otherwise I don't such updated risky.

    Anyway, if you download the update of the BIOS, you will need to extract all files of archive zip first before start you. Also, make sure that you are logged on as administrator.

  • Satellite A200 - error when using fingerprint code

    Hello

    I have the Satellite A200 with Windows vista 32-bit, when I try to log in through the finger scan, I got the massage (error code oxe 7210001 (an internal error has occurred (shared: encrypt cryptopp(StreamTransformationFilter: invalid PKCS #7 block padding found)).))

    Can someone help me?

    Thank you

    Hello

    I m not an expert with this tool of fingerprints, but I noticed here in the forum that the relocation of the fingerprint software could help get rid of this problem.

    According to the Web of Toshiba site, the new fingerprint software is version 5.8.0.4024.
    You have installed? Otherwise reinstall the software of fingerprint and test it again.

  • Fatal error when uninstalling of java 6, updated 26...

    I can't uninstall java 6, updated 26.

    When I click the button remove in the Add/Remove Programs window, I get a message appears: "ERROR FATAL"...
    What I do... ?
    Help, please...

    http://www.Java.com/en/download/support.jsp

  • c-309 g: errors when uninstalling/reinstalling

    passage recent cable to wireless devices (usb connected) 2 or 3 times only added 3 in Manager for devices with no driver, while in something and the imagery of the Ieee, IEEE printer with a driver there. So I was about to remove the devices not the software, and then reinstall wired. Error 1, instead of going to devices and printers and clicking on my printer, I went to add remove programs and uninstall a package named larg HP Photosmart Premium c 309 g. error 2, I unplugged the usb before you uninstall that. I haven't restarted my pc yet. Any suggestions where to start? I kept uninstalling do not restart, a Clipboard? Or bring it to restore to an earlier date? Start or wing? Thank you

    Hello

    Thank you for using the HP forum.

    Once you have uninstalled the software, you can only reinstall.

    Please download the software COMPLETE features of this link for Win 7

    http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-premium-all-in-one-printer-series-C309/3984414/model/3793675#Z7_3054ICK0K8UDA0AQC11TA930O2

    Once you have downloaded, you can install via USB, however, ONLY connect the USB cable when prompted by the software.

    Hope that helps.

  • Error when uninstalling a program

    Hello

    I was uninstalling a program called bartender in Win7 and interrupted uninstall it by mistake.  The program is still in programs and features.  When I try to uninstall again, I get a message that says

    "Batch Maker has stopped working" also says error window Windows is checking for a solution to the problem...

    This operation fails and an error message appears:

    "Error 1722.  There is a problem with this Windows Installer package.  A program run as part of the Setup did not finish as expected.  Contact your provider to support personal or package.  "Action UNREGISTER_BATCHMAKER, location: C\Program Files (x 86) \Seagull\BarTender.exe, command: / Uninstall."

    Please help.  Thank you.

    Type of race or cmd, try: appwiz.cpl in Add/Remove, remove the software, when to exit. To verify.open run/cmd,.

    type: services.msc in msc, locate the service, double-click it, set on disable.

  • Satellite P200 - error when creating new recovery disc

    Hello

    I need to format my Satellite P200, but I have some difficulty. I lost the original disc that came with the laptop. I tried using the Recovery Disc Creator, but every time I run the application it I'm greeted by this error:

    An unexpected error has occurred.
    Exit this application and start it again.
    (Error code: 0D00F6-26-00000001)

    Have tried to reinstall, I just get the same error. What should I try next to the difficulty of the creator, or just the format differently?

    Hello

    I'm not very well if the Satellite P200 was equipped with drive recovery procedure HARD but nevertheless it s m worth a try.

    If the HDD recovery procedure is available on your P200, then you should see the Toshiba HDD recovery option in a new window as soon as you click on fix my computer.

    Otherwise, you will need to order the Toshiba Recovery disk:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite A350 - error when you install the latest version of the Bios (64 bit OS)

    I don't know what the problem is: I am trying to install the latest version of the bios, bios-20090803144625 (64-bit) on a 350 Statellite running Windows 7 RC. I get the following error of "Phoenig WinPhlash64": "do not have the system Bios information BCPSYS block signature not found.» "Error code:-100"
    I also tried the 32 bit installer without a bit of luck.

    I tried to install in safe mode, but the installer won't work in "normal" mode.

    Any suggestions?

    G

    I think that you need to install the package of value added so that the file BIOS can detect the hardware correctly.

  • Satellite A200 - error when running Recovery Wizard

    Hi all

    I'm having a problem on the wizard of recovery on my laptop A200 (OS: Vista).

    I have an error message - "error: Create Partition 08-104 b - 0000 failed. I tried all the solutions provide the FAQ page or "how to". Like http://www.mytoshiba.com.au/support/items/how-to/230, http://www.mytoshiba.com.au/support/items/how-to/95, http://www.mytoshiba.com.au/support/items/faq/71.

    I have a copy of the DVD of recovery with me, but I just keep the above error.
    Please provide any possible solution.

    Thank you very much.

    Kind regards
    Alex

    Hello

    It seems that something goes wrong with the partitions on the HARD disk.
    I recommend to use a MS Windows XP disk or other bootable disk and format the HARD disk first!
    After that, you can use the recovery again disc to reinstall the operating system on this laptop.

    Welcome them

  • Satellite L750 - error when installing Win XP 0x0000007B

    Hi all

    Urgent help to install Win XP on a laptop Toshiba L750.

    I tried Tosibha support and they will not help unless I pay a fee.
    I asked them what happened to support apparently you must pay about $146 each year for the software support and if you told me this before, I bought the laptop I him would not have bought a toshiba.

    So now I'm stuck with this laptop which is useless unless some experts out there.

    Can tell me how to install Win XP on the laptop?
    Please help thanks

    Camo

    > I tried Tosibha support and they will not help unless I pay a fee.
    > I asked what happened to support apparently you must pay about $146 each year for the software support and if you told me this before, I bought the laptop I him would not have bought a toshiba.

    I've never heard of it but first I have to say that this laptop was not delivered with Win XP and so maybe there's no direct support for this OS on this laptop Toshiba.

    Second, if you want to install Win XP Add SATA driver to the Win XP CD or installation Setup because new specifications to support the new type of controller SATA HDD and this controller has the SATA drivers that are NOT part of the Win XP.

    You should check this FAQ from Toshiba:

    * SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations *.
    http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

    * How to integrate the AHCI driver during Windows XP installation
    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

    * How to integrate a SATA AHCI driver into a Windows XP Setup CD *.
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  • "Could not open install/log file" error when uninstalling a program game

    Whenever I try to uninstall a program a number of games, I get a box come in saying 'caould open the Setup log file. Ive tried restarting computor.but nothing. Hopeing you can help us. At soon phil.

    Whenever I try to uninstall a program a number of games, I get a box come in saying 'caould open the Setup log file. Ive tried restarting computor.but nothing. Hopeing you can help us. At soon phil.

    Assuming you are using Vista.
    If you Vista, can I assume that you went to application programs and features, try uninstalling the game, but he wouldn't let you?

    If so far my hypothesis is ok, then maybe you want to try one of these 3rd party uninstall programs.

    Here are a few FREE uninstall programs...

    IObit Uninstaller 1.1
    http://download.CNET.com/IObit-uninstaller/3000-2096_4-75161625.HTML?tag=mncol

    Advanced Uninstaller Free 10.1.1
    http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

    Revo Uninstaller 1.91
    http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

    P.S. I used Revo a couple of times, and it worked.
    I did have the opportunity to use the other 2 listed above.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for

  • NB 200 keeps turning off

    Hello I recently bought a Toshiba NB200-10Z of opportunity, and it worked fine for about a week, until recently: now at irregular intervals and for no apparent reason, the netbook will be could just offshore. I use Ubuntu UNR 9.10 but I also left the

  • Three monitors with a single video card?

    Hey guys,. I have a user with a T430 possessing a video card Intel HD connected to a Mini Series 3 with 2 DVI connectors. She claims that it connected to his laptop to another docking with the same configuretion and she was able to work with 2 monito

  • Later update: ICS 4.0.4 (IMM76L) for US Xoom 3 G / 4 G

  • EA4500 smartwifi: the router's external ip address

    Hi I have an EA4500 with interface smart wi - fi. I need the ip address provided to my router by my internet provider so I can remote desktop into my home computer using port forwarding. I could not find the IP address of my router. Under connectivit

  • internet cuts

    I have a photsmart c309 printer when I connect to my router modam a d-link-g604t I loose internet I have to unpug the printer, then reboot the modem to get my internet HP no help"