Satellite L855 - 10 p - USB do not work because the BIOS update

Similar Questions

• Satellite A200-1tw psae6e - USB ports not working not

  I use windows 7 ultimate on Satellite A200-1tw (psae6e-06u030du) and my usb ports no longer works correctly.
  In fact they recognize certain usb devices, but not all (for mouse and printer example work, but my USB does not work)

  Looking at the Device Manager, everything seems OK... No problem!

  Does anyone have a solution for my problem.

  Thanks :)

  Hello

  Try resetting the USB ports. This means that you need to remove the USB ports/hubs/controllers in Device Manager.
  Then, you have to restart the laptop to get new USB ports.
  In my case it has worked.

  By the way; I recommend upgrading the chipset driver and disable the feature for each energy-saving usb port.
  This can be done in the Device Manager-> port USB-> properties-> tab to save energy

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Satellite C855-1j4j does not turn on - the Bios Update interrupted

  Hello

  I did the update on my laptop Satellite C855-14 days, and all of a sudden the power went out,
  now the pc running either party but not nothing DON'T get PAST...

  What should do?

  + The message was edited: message has already been translated.

  From my point of few the EPROM module must be re-flashed once more with special BIOS crisis recovery disk.

  Usually, this procedure could be done only by authorized service provider available in your country.

  But I found an interesting announcement about how to flash the BIOS on U400 series.
  See the last post [here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62852]

  But I don't very well if this info would be useful and if it would work in your laptop to Mr. However, in case this would not work, contact the ASP from Toshiba for help

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L300D - does not load after the BIOS update

  I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

  There is no lights & there is no noise from the laptop at all.

  Can any ideas on how I fix?

  The laptop is a Toshiba Satellite L300D

  Hello

  Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

  Then please contact the nearest service Toshiba and ask for help :)

• HP Envy 15 Touchsmart does not start after the bios update

  I had one laptop touchsmart from HP Envy 15 (initially Windows 8, windows 8.1 now) for about 2 months now and have not had any problems, until a few hours ago I tried to update the bios of my laptop with the hp support assistant. After the reboot, the pc is more would start up and took me to a blue screen with the error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything that I've done short far from a refreshment or a reset has not worked and if I could I would avoid both that I don't have the bandwidth to download windows 8.1 again.

  HI Calsius:

  Thank you for your query.  I will be happy to help in any way I can!

  After the Windows 8.1 update, did you create a restore point?  If so, you can use to restore from that date and not lose your 8.1 updated.  Some BIOS have an option for a restoration which should not affect your operating system.  I did a search of Microsoft and found this answer click here.   Here is a document on the ' update the BIOS'   click here.»  You did not provide your model number and the HP Envy 15, is a series, so I couldn't get a specific documentation for your computer.  Here is a document on ' computer will start (Windows 8) " click here. If you are able to get your computer running and upward I update all the driversand then create a restore point to return if necessary.  If the Bios update should fail a 2nd time, your restore point will take back you to just before you retried the update. If you were to use the recovery option you need go back to Windows 8, or back to the factory.

  Please let me know if this helped.

• Area 51 ALX - does not start after the BIOS update - still in warranty

  I was preparing my Area 51 ALX for Windows 8 (pre-ordered and expect it to be here Friday) and decided to update the BIOS to the A10 A11. Back on and now it just sits here with no output monitor and my keyboard/mouse TactX™ is not illuminated either. Fans seem to be 100% / 70%. I tried to reset the CMOS and nothing. I'm just here? The office is still under warranty until next February, I believe. I am disgusted seriously now because I looked forward to Windows 8, "Painkiller hell &.

  "and to get some done coding. What a a day of . Don't know if this can help my case but I have been a customer for a long time from the time of Dell before. Had an old P2 Area 51, bought the m11x at launch and was still in talks with Ross Anthony to make a site of 'history' (although never, he eventually happen). I'm sure that set my m11x Win 8 will not work because it is stuck on super old graphics drivers. Can someone from Dell please help me here? Also, if I'm , is it possible to simply replace the motherboard myself? There are lots of tips on eBay.

  At this point, there is a strong chance that the motherboard is brick and needs to be replaced. Fact he complete the update of the BIOS and restart on its own, or force you the reboot?

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Lenovo E560 does not start after the BIOS update

  Finally, gave in the throbbing Lenovo and updated the BIOS on my E560 - big mistake.

  He's been through and installed correctly, no problems with chess, etc. (finally none that appeared on the screen).

  The laptop delivered to market very well, he crossed and updated the BIOS, restarted once and... nothing.

  At the present time I jumped the battery and power, reset the device (press the pwr for 15 sec, etc.), removed all devices, etc., etc., google for similar events and so little matter what I did, the laptop is as dead as a brick. I have the red on but that is all. Nothing doesn't appear on the screen (so can't see UEFI/BIOS), no fans start and the only thing that does the job is that the DVD drive can be opened.

  It's a relatively recent laptop (minimum 12 months so still under warranty), but as a word of warning to the other owners E560 - DO NOT INSTALL THE latest VERSION of the BIOS update.

  Well not unless you want a weight of expensive paper for your office.

  Managed to get everything sorted out (thanks to Lenovo support).

  Pop the battery and AC, then remove and reinstall the CMOS battery brought the laptop to life.

• Z50-75, does not start after the bios update

  Hi all!

  I just baught Z50-75 with AMD FX7500, 8 GB of Ram and FreeDOS. I installed Windows Pro 8.1 and they shot a few drivers during the installation and I went to the view of Lenovo and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and everything was OK The latest drivers I've seen on the site were originally from the BIOS and I downloaded those to and he started the installation, after which he said: "the system will now restart for the changes to take effect" and he did, but it wouldn't start after he did that show me this on the screen:

  And I tried both options (either with the Windows CD inside), but it just stays where it is, no effect.

  I can enter the bios and change the settings, but none of them seem to work because that's the maximum where it will go, the only difference is when I change from AHCI to compatibility mode, it restarts and I get a white screen, I have to use a button recovery to return to the image above...

  I appriciate any help kond, please give me some advice.

  Thanks for the reply!

  I solved the problem after updating the bios, communication between it and the disk hard drive had a few problems and is causing the boot problem. I solved with out the hard drive and install on another laptop, flashed the windows and installed the hard back in my Lenovo, and that worked.

  You tell the truth, I don't really know how it was the solution, but it worked, I guess that Flash just windows helped the hard disk to create the new connection to the bios, that the first was simply corrupted by an error during the update of the bios...

  Now, I know that the bios update is the last solution I'll never use, and of course, save all peace of data I had on the hard drive if possible.

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Satellite A100-192: FN keys do not work after the update to Vista Ultimate

  I am a user of Satelite A100-192. Yesterday I installed Windows Vista Ultimate on my laptop. After installation, I realized 'Fn' and media player function keys buttons on my laptop keyboard do not work. What can be the problem?

  Hello

  Who knows? It s not easy to say what's wrong.
  Satellite A100-192 belongs to the PSAA9E series.

  All the drivers, tools and utilities need to be downloaded from the series on the right. Choose this model number!

  On the page of Tosh, you will also find the Installation Instructions. The drivers must be installed in that order. This is important.
  and don t forget to install the package of value added