Satellite M100 boot from CD/DVD-Rom

Similar Questions

• HP Envy 15 j151sa: HP Envy 15 does boot from external dvd rom

  Hi all

  My HP Envy is new (Envy 15 j151sa). The external DVD drive is new (HP dvd600). My envy model does not have an internal CD/DVD drive

  I want to boot from a live DVD.

  I have read the other messages and answers for similar queries and followed the suggestion.

  At startup, press F10 (BIOS Setup) and Boot Options parameters are the following...

  (a) secure boot - off

  (b) legacy - allowed boot.

  (c) changed the boot order inherited from have the rom USB dvd as the first in the list.

  Save the configuration.

  Restart the PC.

  At startup, press F9

  Lists the available devices (3) to boot from as

  OS boot manager

  Boot from EFI file

  Portable hard drive

  There is No option to select the external CD drive to DVD.

  I updated the BIOS to the HP latest version recommended.

  I don't know what else to try.

  I could really use some help now.

  Thank you

  Your external DVD drive is operatying as it should.

  The best place to find an answer on how to make the live CD is the Debian forum. Disk made you apparentlydoes is not not a MBR boot sector or a recognized EFI partition. Either of the people is what is necessary for the drive to be bootable and your notebook BIOS must be configured in accordance with the choice of the type of format.

  Personally I've always preferred to use a utility likeUNetbootln to make several versions of Linux "live" bootable.

  I don't bother with the hassle of the DVD or CD media more.

  If you have a spare drive 32 or 64 GB USB flash drive, so you can put an incredible number of versions of Linux and troubleshooting utilities on it.

  The economy of scale with usb flashdrive has gotten to the point where a 16 GB usb key is less expensive than recordable DVD media. Check outthe Newegg price.

  Download your favorite version of Debian AMD64 iso direct from here.

• System crash can not boot from CD/DVD-rom

  Tried to do a restore of widows to correct this problem with CD / DVD rom instead of fix player it now only will start and say 'services starting configuration' and then it will pop a windows 'X' in red saying install Windows - Windows could not complete installation. To install Windows on this computer, run the Setup again. I restart and it keeps reading more and more I bought acer accessories Acer store system recovery discs... but they are unusable because can't boot from the drive to cd/dvd rom please help thank you very much.

  http://www.YouTube.com/watch?v=H2xoMEPfiPQ&feature=player_embedded

• How to boot from USB DVD Rom on Y500 with SLI?

  I have problems starting a DVD from my laptop Y500 SLI. The DVD - RW rom is connected by USB and I do not see in the BIOS, but boot USB is enabled. Is it possible for a start of it on the y500 with sli? How? When I turn on the laptop that I can hear the cd loading, but it still goes to windows.

  Hi September,.

  Ishaan is correct since only today, I managed to get my hands on a Y500 to test. I have to admit that the Y500 is a great machine to own :-D

  In any case, with regard to get this to work, you will need to go into BIOS.
  To start the BIOS configuration utility:
  1 turn off the computer.
  2 press the Novo button (small button with the curved arrow, located next to the receptacle) and select Configuration of the BIOS.

  > Go to the tab "BOOT".
  > Under"Boot" change into "Legacy support".
  > Press F10 and save the setting.
  > Machine will restart and boot press F12
  > When the boot menu appears, select desired boot.

  Hope this helps and post your results.

  Concerning

• Satellite L - cannot boot from CD/DVD

  Hello

  I have the following problem u.z. I can't boot from CD if I laptop. Restart, and then press F12 I only at the option of the hard disk and lan, cd player, it doesn't don't show me.
  In the bios if I go to the Starter Strip, it shows me first second hdd 3rd disc lan, but before the name of the drive, it has an exclamation point because I can't change anything.

  Currently using toshiba windows 7 which I had with the laptop and I now want to install another windows 7 because I share with Windows Toshiba it can't erase me the whole plate.

  Help, please

  Hey Buddy,

  Your ad is a little hard to understand, but if t can boot from CD/DVD and the drive does not appear in the BIOS, it seems to be faulty and needs replacing I think
  Usually, there is nothing of what you can do to get rid of this.

  I put t know which model of laptop you have, but I would like to contact an authorized service provider and explain the situation. Guys can you help to swap the drive. :)

• Satellite A200 - 23P - mechanic of DVD - rom does not

  I'm sorry for my English in advance this topic! -Thank you

  I have a very big problem with my engraver of DVD (RM).
  I bought SAT A200 - 23P three weeks ago.
  The Win VISTA operating system has been installed. DVD - rom worked well.

  If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

  Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
  It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

  However, if I have installed XP on the second partition, Win Vista does not load :(
  I don't have a second chance for second selection (Vista and XP).
  I now have XP only, even if Vista is on the first partition - I didn't delete it.

  Do you think that the DVD-rom is HW or SW problem?
  I think that, given that the DVD-rom does not in the BIOS - HW error.

  But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

  If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

  PLS help me someone-

  Thank you!

  Hi Michal

  Your question is very strange, I mean the number of CD/DVD drive

  The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

  So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

  My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

  As you see it s not easy to say what's wrong exactly, we can only speculate.

  Now some details about your installation of OS double.

  You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
  This happened to me also. I installed Win XP on my Satellite and could not start Vista.

  The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

  Then I downloaded the tool called Easy BCD.
  This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

  That s it!

• Reinstalling Windows XP: Boot from ATAPI CD-ROM: failure

  Hi all

  I'm trying to format my PC to reinstall Windows XP. I set the BIOS to select CD-Room as a first option, but when I restart the PC, instead of getting the message "Press any key to boot from CD", I get this "Boot from ATAPI CD-ROM: failure...» "and it starts to load Windows (who doesn't like then I get a black screen and can't do anything), but it won´t start the CD.

  I tried to insert the Windows CD in the DVD drive (I do not know if it would work), but when I press a key to boot from CD, I get a black screen with this message 'nocy zr intdis up trapdis', and then I can't do anything.

  The CD player works, as if I insert a music cd, for example, it runs. The Windows CD also works in the other PC. Any ideas how can I format my PC if the CD won´t run? Or ideas how to run if I get this message "Boot from ATAPI CD-ROM: failure...» » ?

  Thanks in advance.

  Try the suggestions in the link below.

  http://www.computerhope.com/issues/ch000227.htm

  Good luck.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Qosmio E10-102 - cannot boot from CD/DVD

  Hello

  I have a laptop Qosmio E10-102 here. The hard drive is missing and I need to install the operating system on a new hard drive but I can't boot from CD/DVD. After the start of Qosmio screen, it shows "insert system disk in drive. Press any key when ready... ».

  When I press F1, I get the 1.5 version of BIOS ACPI boot menu, but I can't change date, time and the password. The boot priority is HDD-> FDD-> CD and I can't change it. The manual says to hold F12 during initialization, but this has no effect. Even by pressing the 'c' key, the disc does not start.

  I tried to put the hard drive in a laptop and install there, but detects the Windows installation disc, that's not Toshiba laptop.

  No idea how to fix?

  Hi Napto,

  The CD/DVD drive is correctly listed in the BIOS? You see the model number of your player? Usually, this should be possible

  And what installation disc, you are starting? You use Microsoft disc or Toshiba Recovery disk?
  Maybe the current disc is scratched

• Can not boot from CD/DVD on the Qosmio G25-av513

  Hi everyone, I can't get into my windows anymore and when I load the system, I get this error. It shows that I have an error ATA #0
  Intel Boot Agent GE v1.2.31
  Copyright (c) 1997-205. Intel Corporation

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert the diskette in the system in the driver.
  Press a key when read...

  I don't have the recovery CD anymore but I am trying to boot from the CD with a CD of Windows XP and I changed the priority to boot from CD first in the BIOS and it always displays this message... Help, please!

  Hello

  Enter the BIOS settings and set its default value. Then try to boot up your laptop and check what happens. Also try to boot from CD/DVD installations. If the problem continues, I'm afraid there is a hardware problem devices such as HDD and ODD are not visible to the BIOS settings.

  I assume it can be due to faulty hardware or faulty controller on the motherboard.

• Booting from CD/DVD

  Hi all, I have problems with my HP Pavilion g6-2390sa Windows 8, I am trying to boot from a DVD of windows 7.

  I activated the CDROM boot, options of the legacy also and the DVD/CD internal as primary boot device in the options of the efi and the legacy.

  When I boot the system I press the F9 key to selection of the boot device, but the CD/DVD drive is not listed?

  Internal DVD/CD was registered mysteriously once but since I restarted it is no longer present in the list of boot devices, and I did not change between the two BIOS?

  Any help would be greatly appreciated, btw the DVD player works perfectly under windows 8 and I have bootable media in the drive.

  Thanks in advance G

  Hello:

  That's what I'd do...

  It seems that you have changed the BIOS settings to boot from a dvd according to the link below... but it does not hurt to take another look on this.

  http://support.HP.com/us-en/document/c03736054

  What I would do, is to download the W7 ISO from the link below - DL version of W7 that sits on your DVD, the ISO Microsoft USB tool allows you to set the ISO to a flash drive, see if you can boot from the flash drive and use the product key from your DVD.  For this, you will need a 4 GB or more large USB flash drive.

  W7 downloads

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page60?p=470600&viewfull=1#post470600

  Microsoft W7 ISO to USB tool.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• I erased the HARD clean disc. I want to install linux, but he refuses to boot from the DVD

  He tells me that it is not allowed to boot from a DVD! never had a computer like that!

  How to make it possible for a start on a DVD?

  laptop model?

  If your laptop has UEFI, remember that your linux is x 64 version and compatible UEFI.

  You can also try turn on the F12 on the BIOS menu:

  Press F2 at startup

  look for F12 boot menu and it helped

  Press F10 to save and exit

  at the next startup, press F12 and choose the DVD as boot device

• under win8.1, how to boot from a dvd using UEFI on a hp 700-109 c desire?

  I installed a Kingston ssd 120 GB in the 700-109 c and you want to use clone drive ACRONIS to reduce proportionally the 2T dirve to the win8.1 120 GB and boot from there.  I can't activate the legacy in BIOS support because the software warns UEFI to boot from the disk of destination after the migration, must be enabled before we start the cloning process.   However, I am not able to boot from the dvd Kingston (ACRONIS) with secure boot UEFI active.  How do I proceed?

  Hello

  Cloning of the HD under Windows 8 is sometimes problematic. You must disable Secure Boot and turn on legacy mode. Your PC should reboot. I can boot Windows 8 as well in Legacy and UEFI mode with my HP laptop that the use of Windows 8.

  As a side note, usually with UEFI, you will need to insert the CD, and then the PC power cycle for UEFI to recognize an eligible UEFI device such as a CD or USB flash.

  A problem you will encounter is that the bootloader of Windows 8 will demonstrate to the sata hard drive after the clone so it does not start. Another possible cause is that the HP recovery partition is not going to work. Don't forget that you have a set of HP recovery or USB flash drives.

  Paragon makes one a great migration and cloning for windows8 utility which also contains a boot corrector function to manage the windows bootloader question. It is 8.1 compatible window is available for $12.   There is even a video available.

• can not boot from cd/dvd

  XPS 8900. Cannot boot from cd/dvd. Dose of device does not show in the priority start page. Why?

  Press F12 repeatedly as soon as you reboot without waiting for any screen get the boot menu to select the cd - dvd drive.