How to boot from USB DVD Rom on Y500 with SLI?

Similar Questions

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• How to boot from USB-drive on Compaq Presario CQ57 400SO

  Hello!

  I have a Compaq Presario CQ57-400SO I want to install Windows XP instead of Windows 7, which is included. I had two questions now since I hit a few bumps.

  1 at - not, at all, driver support for Windows XP to get their hands on?

  2. How am I suppose to boot from USB (my DVD-ROM is broken)?

  + Have converted my installation of Windows XP on USB disk.

  -J' have tried to change the boot order, and no, the USB is not marked with! so it should work.

  -J' tried by pressing F9, that gets me the Boot Option menu. But once I press the USB it goes right to the Windows (the pre-installed).

  Thank you in advance.

  Kind regards

  Robin

  Hi @kvartsnorsk

  Welcome to the Forums of HP Support!

  I know that you are looking for drivers for Windows XP, unfortunately, this laptop was not sold configured for this OS. Drivers are available for windows 7 and 8 (32 and 64 bit)

  What happens if I do not see my operating system?

  On the boot USB device, it is likely that your bootable usb image isn't UEFI, so you should enable legacy boot in the BIOS to allow boot off this device.

  UEFI and the Start Menu

  The Legacy Boot mode - NeoSmart Knowledgebase

• Boot from USB DVD on Lenovo X121e

  Hi, any idea how to boot from a recovery disk from Lenovo for Windows 7 on a USB stick on DVD player? The laptop is running cannot run from the Linux operating system. The BIOS utility does not recognize the drive no matter what I select in the start menu (USB, CD, USB FDD or USB HDD) and the F12 boot utility also does not recognize the drive. Incidentally, F12 recognizes the Linux USB drive so I know it works. The external drive is a Leicke DVD R/RW DVD.

  The reason for wanting to boot from the Windows 7 recovery drive is to reinstall Win 7 on a new installation, dual boot Linux (Mint), and then install iTunes on WIn 7so I can sync to my iPhone and run everything in Linux. I tried to use an emulator under Linux but unsucessfully Win.

  I noticed that this question was asked IO a few years by another Member, but no resolution. Thanks, Nik

  Hello

  in order to perform a recovery of the factory of the Lenovo image BIOS Setup menu settings should be:
  -"Boot UEFI/Legacy"-> "both".
  -"UEFI/Legacy Boot Priority"-> "Legacy first.

  Select CD USB as a bootable drive.

• under win8.1, how to boot from a dvd using UEFI on a hp 700-109 c desire?

  I installed a Kingston ssd 120 GB in the 700-109 c and you want to use clone drive ACRONIS to reduce proportionally the 2T dirve to the win8.1 120 GB and boot from there.  I can't activate the legacy in BIOS support because the software warns UEFI to boot from the disk of destination after the migration, must be enabled before we start the cloning process.   However, I am not able to boot from the dvd Kingston (ACRONIS) with secure boot UEFI active.  How do I proceed?

  Hello

  Cloning of the HD under Windows 8 is sometimes problematic. You must disable Secure Boot and turn on legacy mode. Your PC should reboot. I can boot Windows 8 as well in Legacy and UEFI mode with my HP laptop that the use of Windows 8.

  As a side note, usually with UEFI, you will need to insert the CD, and then the PC power cycle for UEFI to recognize an eligible UEFI device such as a CD or USB flash.

  A problem you will encounter is that the bootloader of Windows 8 will demonstrate to the sata hard drive after the clone so it does not start. Another possible cause is that the HP recovery partition is not going to work. Don't forget that you have a set of HP recovery or USB flash drives.

  Paragon makes one a great migration and cloning for windows8 utility which also contains a boot corrector function to manage the windows bootloader question. It is 8.1 compatible window is available for $12.   There is even a video available.

• How to boot from USB?

  I was really disappointed when I discovered that my PC always run in error when I chose to boot from USB.
  
  Error: Unable to boot from USB, Press Enter to Cointinue >

  My specs:
  HP SleekBook14 (Windows 8 factory installled)
  CPU: Intel Core i5

  HARD DRIVE: 750 GB
  Graphics: Intel HD Graphic 4000 and Nvidia GeForce GT 740M

  Please HP give me a quicker response... I want to boot from USB in order to install another OS like Ubuntu and Else

  You extract the files on the disk? I forgot extract the iso file when I was installing Windows 8.1 and it showed the same message. I extracted and it was good.

• How to boot from USB FD in HP Pavilion Sleekbook 14-b035tx

  How to boot from a flash drive? I pressed F10 and go into the BIOS menu > System Configuration > start, in the start options Options, I have not found my flash drive...

  Hello:

  See if you change the setting to enable the legacy mode/disable secure boot bios to start on a different device.

  See this link...

  http://support.HP.com/us-en/document/c03736054

• HP Envy 15 j151sa: HP Envy 15 does boot from external dvd rom

  Hi all

  My HP Envy is new (Envy 15 j151sa). The external DVD drive is new (HP dvd600). My envy model does not have an internal CD/DVD drive

  I want to boot from a live DVD.

  I have read the other messages and answers for similar queries and followed the suggestion.

  At startup, press F10 (BIOS Setup) and Boot Options parameters are the following...

  (a) secure boot - off

  (b) legacy - allowed boot.

  (c) changed the boot order inherited from have the rom USB dvd as the first in the list.

  Save the configuration.

  Restart the PC.

  At startup, press F9

  Lists the available devices (3) to boot from as

  OS boot manager

  Boot from EFI file

  Portable hard drive

  There is No option to select the external CD drive to DVD.

  I updated the BIOS to the HP latest version recommended.

  I don't know what else to try.

  I could really use some help now.

  Thank you

  Your external DVD drive is operatying as it should.

  The best place to find an answer on how to make the live CD is the Debian forum. Disk made you apparentlydoes is not not a MBR boot sector or a recognized EFI partition. Either of the people is what is necessary for the drive to be bootable and your notebook BIOS must be configured in accordance with the choice of the type of format.

  Personally I've always preferred to use a utility likeUNetbootln to make several versions of Linux "live" bootable.

  I don't bother with the hassle of the DVD or CD media more.

  If you have a spare drive 32 or 64 GB USB flash drive, so you can put an incredible number of versions of Linux and troubleshooting utilities on it.

  The economy of scale with usb flashdrive has gotten to the point where a 16 GB usb key is less expensive than recordable DVD media. Check outthe Newegg price.

  Download your favorite version of Debian AMD64 iso direct from here.

• Can't boot from USB/dvd drive on Satellite Pro M10

  Hello

  the broken internal dvd drive, an external USB disk is used. Now I need to reinstall windows on a new hard drive. How can I boot from the external hard drive? (I don't have a floppy drive, but I can't find the right drivers)

  Thank you

  Luke

  Hello

  Don t you need all the drivers for this key USB — because the USB disk is a device integrated on your computer. This means that whenever you connect the diskette drive to your machine, the computer establishes that diskette as a cable internal disk and this is the reason why you won´t need all the drivers.

  It s already installed when you plug it in.

  See you soon

• How to boot from USB CD? (S1800-804)

  My internal CD/DVD unfortunately no longer works.
  I bought an external CD 'HIGH SPEED RECORDING EXTERNAL DRIVE QuieTrack ASUS' that works well.

  But how do I boot from it? I would like to reinstall using the recovery CD.

  Currently using Windows Millennium Edition.
  BIOS 2.0.

  Hello
  so as much as I know your Notebook isn't supports startup by an external device.
  You can just boot from the devices that a listed in the bios (like hard drive, floppy drive, CD-ROM internal).

  Good bye

• Pavilion TouchSmart PC 20-f323, how to boot from a DVD?

  My client has a 20-f323 HP Pavilion TouchSmart PC with Windows 8 on it and wants to downgrade and install Windows 7 Pro instead.

  However, my first question is, how to start my Windows 7 Pro DVD on the TouchSmart PC?  I can not even find a boot menu option to start from the DVD drive.

  All other URL on this upgrade process below would be appreciated!

  I thank very you much for your time.

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You can buy a new copy of Windows 7 with a valid COA and the product key.

  The screenshots below is from a notebook HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide AMD SATA/RAID drivers at the moment... Download AMD Chipset Drivers (Chipset / AHCI / USB 3.0)

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  Please post the "Hardware ID" Device Manager (text only) for all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite M100 boot from CD/DVD-Rom

  A friend tried to put a standard of operation of XP sp2 on its M100 cause he has lost all the cd of for her!

  Of course the laptop does not start to the top of the cd/dvd-rom more!
  How can format us again and all the hardware work properly again if it does not start?

  It is really strange. Please try all three methods to force the CD/DVD drive to start as first boot device:

  -change the settings of the BIOS
  -use F12 at startup and choose the CD/DVD drive
  -Press c at start up

  Somehow, he has to work.

  By the way:
  > Of course the laptop does not start to the top of the cd/dvd-rom more!
  What you think with OF COURSE? Is this normal or how do we understand it?

• System crash can not boot from CD/DVD-rom

  Tried to do a restore of widows to correct this problem with CD / DVD rom instead of fix player it now only will start and say 'services starting configuration' and then it will pop a windows 'X' in red saying install Windows - Windows could not complete installation. To install Windows on this computer, run the Setup again. I restart and it keeps reading more and more I bought acer accessories Acer store system recovery discs... but they are unusable because can't boot from the drive to cd/dvd rom please help thank you very much.

  http://www.YouTube.com/watch?v=H2xoMEPfiPQ&feature=player_embedded

• Satellite 2400: How to boot from the CD-ROM PCMCIA?

  Dear all,

  I try to start from the PCMCIA - CD ROM because my DVD-ROM is not working. After you press the power and press F12, I chose PCMCIA but nothing happens. should I change something in the BIOS first?

  My laptop is Satellite 2400.

  Thank you...

  Hello

  I got this Toshiba FAQ document on the startup form of the PCMCIA reader.
  http://support.toshiba-tro.de/KB0/FAQ35005G002KR01.htm
  This article describes a seed on a protected unit but it s useful and you should check it out.

  In addition, you can check in the BIOS the option PC card. Try to change the mode of the CCIP Compatible controller or CardBus/16 bit and tries to start again the PCMCIA card.
  To change these settings, first change the configuration of device for all devices

• How to boot from external DVD using Iconia W700P?

  I'm tired of having to restore my entire system (and lose all my files, programs, applications, etc.) whenever something is blocking the Iconia W700P (and quite often). I have an external DVD, backups of the entire system using Acronis True Image 2015 an Acronis boot disc (made on a Win 7 machine), but can not get the system to boot to the DVD device. I tried to reset the boot sequence, but it keeps starting in my original system of Windows 8 (I had to restore everything again once). I even tried to change to a legacy starting, but the system could not find a bootable device.

  Without a way to restore my system, this expensive machine is completely worthless!

  Help, please!

  Turning off secure boot seems to have done the trick. The DVD is loading now.

  Thank you!