Satellite M30: No network connection home

Similar Questions

• Satellite Pro P200: network connectivity is not stable

  I have a Satellite Pro P200, which was downgraded from Vista to XP Pro SP3 corporate.

  I use a sensitive enough network application that will crash when network connectivity is lost.
  This application has been blocking a lot since I downgraded to XP, so I tried to run a continuous ping that gave rise to many messages Request Timed Out (the maximum number of attempts where I actually had ongoing responses was about 30 but is usually much less).

  I use the driver downloaded from the Support from Toshiba site (Realtek RTL8139/810 x Family Fast Ethernet Nic - v5.664.205.2007), wireless network works fine, tried to connect to the network using a cable and a port different without change, and using a different laptop with the same cable and port works fine.

  The yellow exclamation mark in Device Manager is a memory PCI controller which I believe is for the Intel Turbo Memory, because it is not compatible with Windows XP.

  Any ideas what could be the cause.
  I tried reinstalling the driver several times without success, it is likely to be software partners or could it be a hardware failure?

  I think it's related software and troublemaker is SP3. Test it with SP2 only and it will work perfectly. Friend of mine noticed permanent data LAN transfer interruptions after installing SP3. Remove everything works well again.

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Satellite L300 PSLBGE network connection drops randomly times

  Hey,.

  I had this problem with my laptop because I bought 1.5 years ago.
  Now I launch Windows 7 x 64 with the latest bios (version 2.20 - WIN; day 25/02/10), chipset and wireless (the card is a: Realtek Wireless LAN Adapter 8187 B; driver version: 62.1182.0331.2010) drivers.

  The problem is that my network connection drop at random times.
  This produces both with my wireless lan card and it comes up with a variety of routers (at work and at home I use a linksys wrt54gl, but I tried it on all the other routers with the same result).

  I don't think it's a hardware failure, since the network seems to work very well under Linux (I tried Ubuntu 10). Also some time I took it for warranty service and they said that the material is fine, but I should "not use many programs at the same time and use Windowx XP.

  I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

  Thank you

  > From what I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

  No, the card WLan and LAN card are not connected to the USB just the webcam interfaces so it cannot be any USB issue.

  I think it might be a problem of Windows since Linux is OK

  I think you should check the power management settings in Windows 7 and card Wlan /LAN. This can be done in the Manager of devices-> WLan / LAN card-> Advanced tab properties.

  I also recommend upgrading from win 7 to the last installation of State all updates and patches

• Satellite L300D - no network connection

  Hello

  I have a Toshiba Satellite L300D-13s and I have been having some problems starting so have just formatted and installed windows vista on it.

  I have problems to get the network adapter to work, it is a Realtek rtl8101 Family PCI - E Fast Ethernet NIC(NDIS 6.0). Of course the BONE there when I installed everything first were some pilots so I had the yellow! next to it in Device Manager.
  I downloaded the drivers rtl8101 which is yellow! disappear so many thought it should work, but all I get is "this computer has an installed and configured wireless network adapter".

  It does not work with a wired connection or wireless.

  I'd appreciate any help, its driving me crazy!

  see you soon

  Hey,.

  You have installed Windows with the normal Windows Setup disk or recovery disk Toshiba?

• Satellite M30-154 cannot connect to wireless internet (wifi)

  Hello

  I did a recovery of product on my m30 - 154 a couple of days, and now it doesn't connect to the internet wireless, we have in our House. He sees the SSID, but it just connect, I have already made an update of the BIOS and an Intel update and I don't know what to do now. Can someone help me?

  see you soon

  > he sees the SSID, but it is enough to connect

  The SSID is secure. Right?
  Can you connect to open Wlan?

• Problem of printer c310a with minimac on my network connection home

  I spent all last night trying to get the new hp photosmart printers to print from the

  tray of the printer. It is installed and it printed a sample image that came on the front windows

  the printer photosmart c310a that my husband is connected to its minimac (10.5.8).

  However, while it will print on regular 8 1/2 x 11 paper, it not an image print on

  the mac mini with phototray paper. We tried affecting all types of and paper size

  paper photo 4 x 6,

  My network printer is down and is a c309g and for a while this morning, it wouldn't

  print online, but I cut the router (linksys e1200) and printer, cut that both turn it back on and it

  has worked well.

  I still don't know what to do with the new printer (photosmart c310a) on the floor with my husband

  MiniMAC and he does not either. (See paragraph 1 above) Night before last we spent hours

  Configuration printer until I found the password on linksys e1200 (Cisco page). Then printer worked, but

  Displays only the samples of images that appear on the window on the printer using phototray paper.

  Need free help!

  Sing Dixie

  OK, you didn't say what software you use to print.  On your Mac Mini, I will assume that it is iPhoto.

  Make sure that when you start to print, select the paper size AND photo size in the drop down menus.  If you select a photo 4 x 6 just, but do not specify the size of the paper, it will use the default value (8.5 x 11).

• Satellite M30 961 modem connection problem

  Hello

  I'm struggling to establish a connection with the modem on all phone lines. Some lines are working and others drop immediately after the handshake.

  Help, please

  Jaco

  Hi jaco

  First try to check your modem. Go to the properties and the Toshiba software modem under DIAGNOSTICS check t with the query modem. If there is, everything is OK, the next step is to check the telephone cable for the connection of loss or damages.

• Satellite M30-704: band bandwidth hoggin?

  Hi This is my first post so go easy on me.

  I have a satellite m30 704 currently under xp sp2 and my problem is that I share a wireless network with two other computers, another laptop manufacturing running xp sp2 & a mac from apple OSX.

  The router is a netgear DG834GT.

  They are all connected via wifi & it seems to be my laptop creating the problem monopolizing the bandwidth?

  If I'm on the net at the same time as other portable computer manufacture it is not a problem at all, but if I'm on the net at the same time as the imac it takes literally 5 minutes to load a page on the imac.

  It happens also that as soon as I pass on the other computer laptop manufacturing & I am connected regardless of the fact that I'm not really surf the net?

  But if the XP laptop & the imac are both online at the same time there is no problem at all.

  I'm completely baffed to that I have absolutely no idea why this is happening, I even contacted netgear & they suggested upgrading the firware & reconfigure the router, done cela & still no luck so please can someone help me before I'm left with no option but also to buy a new laptop like the imac user is my brother who is a freelance graphic designer so that it uses his imac for work, hes, threatening to disconnect me!

  Thank you

  Hello

  A question: why you have connected two units machine to Windows XP and MAC to the internet if you only work with one at the same time?
  Disable the connection on Windows XP computer laptop for work with MAC and everything will be ok ;)

  I don't know why the Internet is slowly on other units while the Satellite M30 704 was connected to the WLan router. Maybe a part 3 application is running in the background and the bandwidth with both hands

  What card WiFi has been installed on the M30?
  It supports a 802.11 B or 802. 11A / B WLan standards?
  Maybe the map of the M30 WiFi signal has a bad influence on the correctly WLan signal received on the iMAC that knows

• Satellite M30-604: USB Port can not find the driver

  Hello

  I keep having the same problem on my Satellite M30 604 when connecting to a USB device.
  It does not really matter with this kind of device, the problem still.

  Whenever I have insert the USB plug into one of the slots, my home XP keeps popping up the wizzard software.
  Even with devices without drivers such as USB keys, it keeps bothering me and finally tells me that it cannot find the right driver.

  If I try to install a printer, it installs the software found, but finally stops the operation because it can't find the driver (?). I don't know in what direction I should look at to solve this.

  So if anyone can help me on this, I would be very grateful!
  Edwin

  Hello, Edwin

  It's very strange because it is not necessary to install a USB driver and standard Microsoft USB driver should work well. I put t know if this can help, but please check this page

  This fix is also part of the factory settings (recovery image on the delivered CD). By the way: your device is about three years old and it will be interesting to know since when you have this problem. Just for example: I have more Satellite 1900 with USB 1.0 and use USB keys and drive external HARD without any problem.

• Satellite M30-841: cannot install a clean WinXP Pro - CD not recognized

  Hello

  I got a satellite M30 841 with Xp home on it. Now I want to install my own licensed xp pro version, but I'm not able to see the cd in Solution Explorer - although the cd player works - or to boot from it. Modification using boot command doesn´t.
  On the other stand-alone cd works fine. The toshiba recovery cd works on my laptop, but I would like to have Pro.

  Can someone help, please?

  THX ulrich

  Hello

  If you do not see the drive in windows Explorer, try this http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

  By the way: what is the status of the drive in Device Manager?

• Problems connecting to a Satellite Pro 4600 for network wireless home

  Hello
  My computer has a processor Athlon 64 x 2 4200 + and 2 GB of RAM, with XP2 Pro. I have a Linksys WRT54GS broadband router and connected with Virgin Media.

  My daughter gave me an old laptop a Satellite Pro 4600 with a 747 MHz Celeron processor, 384 MB of RAM and XP2 Pro has an Intel Pro/100 VE Network adapter. I set up a Linksys Wireless - G Notebook Adapter with SRX (model No. WPC45GX), so that I could use around the House. However when I try to connect to the home network, although he "finds" a list of networks, I am unable to connect and get an error message - "Windows cannot connect to the selected network (my home network). The network can be is no longer in range. Please refresh the list of available
  networks and try again. »

  I tried to connect with laptop computer in the same room as the router, but get the same message. In the Manager of peripheral devices, network cards, the two are shown and both work properly, but in the taskbar there is a red cross shown on the two icons, they say that a network cable is unplugged, but I don't have a cable network.
  The other tells me that the wireless is not connected.

  I presume that the adapter works as it can 'see' wireless networks, I used Lynksys support to verify that all router and adapter settings are correct.
  My wife has a new laptop and is able to connect to the home network with no problems.

  Please can someone offer advice or assistance.

  GMC

  for some reason, you need to turn off your wired connection (cable) and use the client of the PCMCIA wireless network card. Maybe just the problem that your system can not separate the two network connections and gets an error it s. You should also visit the site Web of Linksys and download the latest driver and the customer for the card, so you can make sure that the software is up to date.

  Another good idea would be to visit www.microsoft.com and the support center for any 'knowledge base documents' which could probably solve the problem.
  As your machine is really old and no one is using PCMCIA cards more, you may wait a long time for an answer in this forum. Maybe you should check the site from linksys for a support section. Maybe they could help you...

  Welcome them

• Satellite Pro refuses to connect to wireless networks

  Hi guys! I need your help!

  My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
  all except my home router from the sky.

  I have moved since and am not able to connect to the free public Wi - Fi.
  No error message; Just click to connect to a particular network and nothing happens.

  I've been back home since and it connects automatically.
  I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

  Any ideas?

  CAL

  > I've been since back home and it connects automatically.
  This means that you can connect to your WiFi network at home without big problems?
  This indicates that s laptop WiFi connection works correctly.

  I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

  What happens if you change the Wlan standard? (802.11 a / B / G or N)
  This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

• Satellite Pro L40 - network LAN adapter does not connect

  We had a satellite pro L40 for about a year and have connected to the internet through our wireless home network using the connection Wireless on the laptop.

  My son has now gone to the University and tries to connect to a wired connection via the network adapter, but without success. He tried 3 different cables and different takes the work of others within its rooms, so we know the cables and connections to work.

  Setting up the program guard in him asking to connect the cable, which he did. Adapter network said he works in the control panel and new network connection section, it says to connect the cable.

  Any ideas would be welcome!

  Steve

  What is the "Installer"?

  Try to disable the firewall and update the LAN drivers on the Toshiba site.

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.