Satellite M35-S456: no right to run the Power Saver & FN keys does not work

Similar Questions

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Windows 8.1 on the function Fn + Z510 keys does not work and I see no Lenovo so that they work again

  This computer came with FreeDos and I had to buy a windows at retail, so it was not a custom set for the laptop and when I page driver Lenovo for Z510, the only touch pad driver and keyboard page is the touchpad drivers.

  Nothing for the keyboard.

  So what don't understand me? Where can I go to activate the additional function keys?

  Furthermore, I checked in the BIOS and access keys is enabled.

  Apparently, I had a problem of motherboard and its now fixed thanks to the repair center, that I went.

• How to do a screen shot on a toshiba satalite, the windows and prtsc key does not work

  title says it all,

  If you go prtsc, you can paste the image into Paint and use it from there.  If you WIN-PRTSC, he will be put in a file in library/pictures/screenshots.

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• The FN key does not work on my new C70D Satellite

  Hello I'm new here :)

  I bought a new Toshiba Satellite C70D-B-108, but the Fn key does not work. Is anyone know I can fix it? The laptop runs on Windows 8 with a shell "classic."

  Check please the parameters for function keys mode. There are two ways to use the F keys:
  -Special mode use F keys only
  -Standard F1 F12 mode key FN + Fx

  Check settings please.

  By the way: do you use the original pre-installed Win8.1 that you got with your machine?

• Printer print, when I print documents to the right side of the document gets cut it does not finish what was on the screen.

  When I print documents to the right side of the document gets cut it does not finish what was on the screen.  This happens on all documents.  I don't know what to do.  I got a HP Photosmart Premium and he did it so I thought it was defective and bought a HP 7520e all in one and it does the same thing.

  Hello

  All changes made to the computer before the show?
  Method 1:
  See the link, run the Fixit and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us
  Method 2:
  If the methods above do not solve the problem you can check this link and follow the steps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Method 3:

  Try to adjust the alignment on the other side. Follow the steps.

  1. Click Start.
  2. Choose Control Panel.
  3. Choose a printer.
  4. Choose preferably to the printer.

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• FN key does not work on the satellite L745

  yesterday, I uninstall almost all toshiba prog and then my FN key does not work!
  Please help me this laptop is only a week

  Hello

  Install the VAP (value added package) and reboot the laptop.

  Then install the Support Flash Card utility and reboot once more.
  Then test the Fn keys.

  The buttons are controlled by Flash cards, so you should be able to use the buttons after a new installation of this app.

• Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

  I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

  What can I do?

  Hi navarone_1,

  This means that the work of FN keys and you can t use the pad touch, right?

  Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

  You can find all the drivers and tools for your laptop on the Toshiba official European page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

  Last but not less than first installation package of added value and Flash then cards support utility.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af