Satellite M70-155: after reinstallation of the operating system that WLAN is not working

Similar Questions

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• HP Compaq SR1913WM Office XP SP3 - after reinstallation of the operating system, difficulties to get drivers Lan loading?

  Hello!  Help!  Virus required reformatting my HD-re-installed OS, HAVE all THE DRIVERS NEEDED (downloaded support)... installed Bios Update 1, GFORCE 2 6150E Nvidia Chipset, Nvidia Video graphics 3rd, 4th Realtek HD Audio... all was well with these... even the audio - which I had trouble with the front! But, when I tried to install LAN/network drivers, (enumerator bus network Nvidia and Nvidia NFORCE Networking Controller), they WILL NOT go!  I drove the search for the installer DIRECTLY to files, but get the same message that the location CONTAINS NO drivers needed!   I have not CHANGED anything, other than the HD format and may not know WHY it don't work? In addition, "MS Tun Mini Port Adapter" appears in the section network adapters in the Device Manager... I never installed it and have no idea why it is there... but it don't me LET... Uninstall error "failed to uninstall the device. The device may be required for a computer start. "Huh?

  Any help will be greatly appreciated!

  P.S. Someone told me that the drivers should be installed in a certain "ORDER"? WHAT is the question?

  Hello:

  The 14F1 is a modem - SoftV92 Data Fax Modem with SmartCP

  Try this driver for an eMachines T6410. Select the modem download. This model uses it even than yours.

  http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1640

  The unknown device is the AMD Away mode driver. You will need to manually install this driver by clicking on the unknown device in Device Manager and click on the driver tab.

  Click on put up-to-date driver, select manual search and navigate to the folder of the driver that you extract the zip file that I attached below.

  You might want to try the package of network drivers from your PC support page. If a driver installed and you still have network problems, I do not know how to solve them.

  Miniport Microsoft map should be native to Windows.

  Good luck

  Paul

• SD-C2502 reads only CD after reinstallation of the operating system on Tecra

  Hi, I just had to reinstall windows XP, and now dvd - rom only reads CD. I have sought a pilot put this right but fails: someone at - it ideas?

  Hello

  Are you trying to use film of original DVD that you can buy in the store or self made DVD?

  If you are trying to watch DVDs of self-made maybe you must install a codec.

• Cannot use trial after reinstallation of the operating system

  Good afternoon! I wonder how to retrieve the activation of download for the free trial of a program? I activated the trial service and had a few days later, a problem in my book and I had to reinstall the previous version of my windows 8.1 System. So adobe, the Criative cloud program not accept lower once again and now tell me to purchase a plan. I haven't used the free trial version or you want to four days of testing. And now, I'm not able to do the test again. What should I do to be able to reinstall the free evaluation test of Adobe Photoshop cc 2015? Recognizing!

  [Title edited for clarity... MOD]

  Please see: software Adobe to trial has expired at the beginning

  You can try to install the first instance on another computer if you have this option.

• I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

  I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

  Then, you install Camera raw version 9.4 from this link: Camera Raw of Adobe Photoshop CC and CS6 Installer

• When I print, the photo viewer rises and am OBLIGED to print from that program. The problem is, that it does not work - the colors are inverted and incorrect. All attempts to correct in the color management failed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • When I print, the photo viewer rises and am OBLIGED to print from that program.  The problem is, that it does not work - the colors are inverted and incorrect.  All attempts to correct in the color management failed.  Some images are color reversed negatively. and others not when the print window picture viewer options are increasing. and every time I print a normal color on the picture he reverse out come.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  didn't work :/

  ==============================================
  It may be interesting to try to remove all color profiles in the color management.

  Windows 7 - change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  If this does not work... update or just reinstall your printer driver may be worth a try.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After the reinstallation of the operating system on my A30, the player will stop recognizing DVDs

  HI I HAVE RECENTLY REINSTALLED MY OPERATING SYSTEM USING THE DRIVES SYSTEM OF TOSHIBA AND NOW MY PLAYER SD-R2412 CEASED TO DETECT AND KINDS OF DVD.

  AFTER LOOKING AT THE FORUMS, I'M STILL CONFUSED FOR THE ANSWER TO THIS PROBLEM. I DON'T KNOW IF ITS THE DRIVE, THE SYSTEM, DRIVERS OR WHAT.

  ITS AN A30 SERIES PRESENTED AT THE DEC 03. Help, please.

  Hello UCS

  The fact is: If the unit is pre-installed with original recovery media, the installation is absolutely clean and all hardware components are installed with the correct driver.

  What is the State of the drive in Device Manager? The drive is recognized in Windows Explorer? Please check the functionality with the original DVD movies? If there is no success, I guess the drive is faulty, and it is unclear to me that you can remedy this by using a firmware or something like that.

  In my opinion this isn't a problem with the operating system. It may be just a malfunction of the DVD drive.

• I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

  I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

  The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

  The Mac App store shows that my printer software is up-to-date. Can you help me, please?

  did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

• After installation of the operating system 7, Photoshop CS does not work and is called a power PC program. It is an Intel machine and Photoshop has worked well with OS 10.6.

  After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.

  The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.

  You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.

  Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.

  Your have several options.

  (1) buy a new version of Photoshop that runs natively under Leo.

  2) back to Snow Leopard.

  (3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.

• Cannot turn of the touchpad pavilion dm3 the reinstallation of the operating system.

  I have a Pavilion dm3 1060eo with windows 7 64 bit. I reinstalled the operating system after some malware and now I can not turn touch pad. I downloaded the last mouse commands, but it did not work.

  I also wonder where did the background, one that was installed when I got the computer from HP. The background is shown on the HP page template. He want to come back!

  Sofia

  Have you tried to reinstall the 64-bit Windows 7 to Alps pointing device driver package?

• Reinstallation of the operating system

  How can I reinstall the operating system for HP dv2000 laptop. I am currently using windows vista Home premium 32-bit?

  Hello

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document at the link below.

  Perform a recovery of the HP - Windows Vista system.

  Kind regards

  DP - K

• Product key recovery Windows 8.1 AFTER replacement of the operating system

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  Ask the person who has built your computer and installed Windows 8.1 where they have bought and what they were doing with the product key.

  See you soon.

• What is the operating system that is used for a Wii?

  Please could you help me because I write a report for my work of college on the Wii and I need to know what is the operating system, but I can't find any decent site :) Please send me the answer to the * address email is removed from private life * thanks :)

  Hi TomSmith81,

  I suggest you to have a look at Wii support page.
  http://www.Nintendo.com/consumer/systems/Wii/en_na/index.jsp
   
  All the best with your work report.
  Thank you.