Satellite M70-173 - cannot burn CDs or DVDs
Hello
I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.
It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.
I have the following options:
1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error
2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.
I made copies pdf of burning errors I can post if necessary.
Any help is welcome
Kind regards
Juan
Hello!
> I made copies pdf errors burning I can post if necessary.
Yes, I think it's a good idea. ;)
Otherwise it of a bit difficult to help you.
But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
And you should burn on a lower speed for CD e. g. 16 x.
Good bye
Tags: Toshiba
Similar Questions
-
Satellite L30-113 - cannot burn CDs or DVDs
I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.
Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.
I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
I have no idea on how to fix this unit "corrupted".Hi mate,
I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
http://support.Microsoft.com/kb/314060After that, I again was able to burn DVDs.
In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.
-
Satellite A210-16F cannot burn CDs or DVDs...
Hi, I bought a Satellite A210-16f. I did the downgrade to XP Professional... Everything works fine, but I burn cds, dvdcs, audiocds can´t...
I don't know if its problem of HW or SW problem... In Vista home I didn't try to burn a CD, because I reinstalled it XP.I use Nero 8, but after 3% of burn it show me error and Burning process failed
Nero 7 shows me the same.I tried Toshiba disc creator and this SW shows me this:
The ocured of following error to save data
Stops the current process
Error occurred during the registration phase...etc...
Can U help me?
Thanx
Well, either it's a question madia or CD/DVD drive problem.
Check another CD and DVD from different manufacturers.
If the same thing happens to what different types of media, then it s a STRANGE HW issue. -
Satellite A40-231: cannot burn CDs or DVDs
Hello
I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.
I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.
My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.
Here are my specifications:
Toshiba Satellite A40-231
Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
System dual boot: Windows XP SP2 and Linux Debian SargeHello
In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
You must use these mediums as they are tested and should work correctly.Another tip:
Go to start > run > and start recording with a command regeditDelete values
upperFilter and UpperFilter of this key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}I've done on my laptop and noticed some improvements
-
Satellite M70-173: cannot install XP Pro
I wonder if someone can help me. Recently, I bought the laptop Satellite M70-173. My problem is that it comes with XP Home. I need XP Pro. I bought XP Pro, but when I try and boot from the Disc... the drivers are starting to load up and then it freezes.
To restart, the only is to unplug the power and remove the batery. I checked the disc on another laptop as a test and it works. Any ideas? One eventually is to create a windows startup disk and format? But is not a floppy drive. Many tried to copy the boot to a cd disk but does not drive. Any help would be appreciated
Thank you
Hello
As far as I know that the Intel SATA AHCI Controller driver has been installed on this device.
This driver is required for SATA hard drives. The OS Setup is unable to start without this driver, but then the installation hangs.
On this page of intel for drivers:
http://support.Intel.com/support/chipsets/IMSM/sb/CS-021701.htmBut the recovery procedure works with the recovery CD?
Have you created a CD of Drivers and tools with the function that has been placed in the assistance of Toshiba?You should also find this driver very necessary.
Good bye
-
Satellite A60 no longer burn CDs and DVDs
Hey, somebody help me.
My A60 laptop no longer burned CDs and DVDs.
There do not seem to read empty discs.
Some regular she reads, but will not start and some, it will not
not even start.Hello
Sounds like a damaged disk device.
Usual that these problems occur if the lens of the player is unable to calibrate correctly.
In my opinion it has not much to do. I don't think that the replacement of the drive will solve such a problem.
As the authorized service partner Toshiba for a reader compatible and taken in charge. -
Cannot burn CDs or DVDs, get code error 380381-26-00037200
Original title: DVD problem
I can't burn a cd or a dvd, error code 380381-26-00037200 appears. CD DVD & cannot be formatted
Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Satellite P755-S5262 cannot determine if the DVD drive can burn a CD or DVD
I recently acquired the P755-S5262 and cannot determine if the DVD drive can burn a CD or DVD.
The description of Toshiba wrote:
Drive DVD SuperMulti (+/-R double layer) supporting up to 11 formats but I can't imagine that a laptop of this caliber cannot burn a CD/DVD.I can't find an answer or a description nowhere else.
Someone on this site/forum can answer my question?
Hello
The CD/DVD drive can burn CDs and DVDs
I recommend using compatible diskettes... I use TDK and DVD r CD and they are really cool
-
Satellite Pro M30 - cannot burn CD/DVDs
Hello!
Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).
Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.
Windows XP 5.1
IA32
WinAspi: -.
Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1
Recorder:Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
Adapter driver:HA 1
Drive buffer: 2048kB
Bus type: default (0)-> ATAPI, detected: ATAPI
CD-ROM:Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
Adapter driver:HA 1 = Scsi-device-map =.
DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off= CDRom-Device-map =.
CARPET * a DVD-RAM UJ-820 s D: CDRom0
Generic DVD-ROM E: CDRom1
=======================AutoRun: 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) byte
ShowDrvBufStat: 0
BUFE: 0
Physical memory: 510 MB (523184 KB)
Free physical memory: 228MB (233560kB)
Memory in use: 55%
QUERIES PFiles: 0x0
Static write speed table: 0
Use consultation: 1
Global Bus type: default (0)
Control supported media: disabled (0)4.11.2004
CD-ROM (ISO)
14:02:51 #1 text 0 file Isodoc.cpp, line 6165
ISO document burn settings
------------------------------------------
Determine maximum speed: FALSE
Simulate: FALSE
Write: TRUE
Finalize the CD: FAKE
Multisession: TRUE
Multisession type: Start multisession
Burning mode: TAO
Mode : 1
ISO level: 1 (Max. of 11 = 8 + 3 char)
Character set: ISO 9660
Joliet: TRUE
Allow pathdepth more than 8 directories: TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660; 1 file extensions: TRUE14:02:51 text 0 file Burncd.cpp, line 2832 #2
CARPET * A DVD - RAM UJ-820 S
Protection against the imbedding of buffer enabled14:02:51 #3 text 0 file Reader.cpp, line 127
Player running14:02:51 #4 text 0 file Writer.cpp, line 122
Writer MATT * A DVD-RAM UJ-820 s running14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
First address writeable = 0 (0x00000000)14:02:51 #6 text 0 file Burncd.cpp, line 3117
Turn on Track-at-once, using CD-R/RW media14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 51106 (11:23.31)14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
Write in overburning mode: No. (enabled: CD)14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
Recorder: MAST * a DVD-RAM UJ-820 s;
CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
ATIP data:
Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
> Protocol of DlgWaitCD activities:
=========================================14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
CIS (after recorder preparation)
0: TRM_DATA_MODE1)
2 indices, index0 (150) not provided
#0 + 51107 (51107) original disc POS = #51107 / 11:21.32
relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
--------------------------------------------------------------14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
DAO infos:
==========
MCN:
TOCType: 0x00; Closed disc, session not obsessed
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
Introduction DAO:
===========
__Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
-150 | Lead-in | 0 | 0x00 | 0x41
-150 | 1. 0 | 0x00 | 0x41
0 | 1. 1. 0x00 | 0x41
51107 | Lead-out | 1. 0x00 | 0x4114:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
Removed 2 blocks from end of track 1. Length: 51107-> 51105.14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
Caching of files started14:02:52 #15 text 0 file Burncd.cpp, line 4003
Cache writing successful.14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
Caching of files completed14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
Burn process started at 16 x (2 400 KB/s)14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #014:02:52 #19 text 0 file Mmc.cpp, line 20673
Set BUFE: Protection against embedding of stamp-> ON14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
Status: 0x04 (0x01, SCSI_ERR)
HA-status 0x00 (0x00, OK)
TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
0x00 0x00 0 x 15 11 0 x 0 x 73 0x0314:03:11 #21 CDR-1106 file Writer.cpp, line 311
Power calibration error14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
all writers idle, stopping conversion14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
conversion idle, stopping reader14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
Invalid write state
CARPET * A DVD - RAM UJ-820S\H1 T014:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
Could not perform PlageFin14:03:12 #26 text 0 file Mmc.cpp, line 15477
start closing a Session 14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
SCSI Exec, HA 1, YOU 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-status 0x00 (0x00, OK)
TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
0x00 0x00 0 x 15 11 0 x 0 x 73 0x0314:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
Power calibration error14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
Could not perform fixation14:03:12 #30 text 0 file WriterStatus.cpp, line 258
falling back to disc fixation14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms)-> OK14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
Burn process failed at 16 x (2 400 KB/s)Existing drivers:
File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)Registry keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)Here's how I just fixed my misfortunes:
In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.
Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.
(1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".
(2) to ensure a hard reboot (power off)
(3) Windows to automatically detect any material it appears after reboot begins
(4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
b change of "Ultra DMA mode" "PIO" mode only(5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "
(5) - hard reboot again
(6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.
It should then work.
-
Satellite A200 cannot burn CDs
I have an A200 - 1 GB and I can not burn CDs and DVDs only. I tried different programs, but it was the same thing.
What can be the problem? I want to update my driver, but I don't know which driver is from the download page. So, please help.
Thank you.Have you used the CD s mentioned in the user manual?
As far as I know Toshiba recommends to use the CD manufacturers listed in the user manualHowever, the problem of material is possible in this case that replace the CD/DVD drive
Good luck
-
Satellite M70-173 - fatal error - new drive HARD and recovery.
Excuse my lack of knowledge.
I received a Satellite M70-173.
to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.
I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.
I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.
I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?
Also
where would I go to get a recovery disk?
I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!
I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.
Thank you very much in advance for any help I can get.
Peter
> The laptop does turn on - is it possible to make a recovery of a damaged laptop disk
How do you do if you can't turn on the laptop?
What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.
In my opinion this is what you could do
-
I forgot the password of BIOS Satellite M70-173
Satellite M70-173 - I forgot the BIOS password. What can or what should I do?
Thanks for help or advice.
kohortaHI Kohorta,
There are few things you can do if you have forgotten your BIOS password. The only effective way to reset it is to take the appliance to your nearest authorised Service partner who has the necessary equipment for re-flashing your BIOS chip. They generally must prove you your ship-owner of the laptop before it will change.
You can find various utilities listed on some websites and also some means to bypass the BIOS password, but they are absolutely not guaranteed to work on most modern laptops.
Kind regards
-
Installing Win7 on Satellite M70-173 - query of wireless internet
Hello
I have a Toshiba Satellite M70-173, which I think to be up-to-date with windows 7. However after you run the windows 7 Advisor, he told me to download the driver of the wireless device that is:
Intel (R) PRO/Wireless 2200BG Network Connection
I put t really know what it is? Is my wireless 'card '?
In any case, I check on the Intel site for the updated drivers for win7, and he says:"Intel® PRO/Wireless 2200BG Network Connection does not support Microsoft Windows * 7.
Intel® PRO/Wireless 2200BG Network Connection is no longer manufactured by Intel, nor Intel provide any future software updates to support new operating systems or improve compatibility with devices and third-party software products. "
Does this mean that I should not install Windows 7?
How can I work around this problem, do need me to upgrade and how much would this cost?
Thank youSatellite or Equium M70 is old model of laptop computer designed for Windows XP Home edition, so it is certainly not taken in charge for Win7. It is certainly possible to install Win7 on this laptop, but you will not be able to make it work with all the options that are specific to Toshiba.
Yes it's the wireless card if this card doesn t work for lack of best drivers and the best option for you is to buy the wireless USB dongle. Ask your dealer how local it costs. As far as I know that's not expensive.
-
Qosmio G30: CD/DVD drive does not burn CDs or DVDs
Hi all...
I use a laptop G30 and the moment where that I bought I couldn't burn CDs or DVDs in the drive using the!
Whenever I have inserted a blank CD/DVD into the drive, it can not be read and an error message is displayed (E: / is not accessible incorrect function) when I try to click on the CD/DVD ROM.If anyone has an idea on what to do, please share it.
Thank you
Hello
Check it please drive under recording tab properties and enable CD recording this option of drive. After doing this he test again.
-
Satellite M70-173: wireless connection is not working properly
Hello
I am a novice and need help with Wi - Fi. I have laptop Satellite M70-173. My desktop pc is connected to the Netgear MR814v3
802 11b cable/DSL with wireless router. I have connected the router to my broadband (telewest) and have access to the internet on my desktop pc. I turned on the connection Wireless via the menu of the router (the lights is on the router it's transmission). My wireless laptop is switiched on, BUT when I use windows on the laptop to get a wireless connection, nothing is detected. The laptop is 50 cm from the router. I tried and did the following:Firmware update,
Made sure the SSID is the same on the router and the laptop.
Wireless on laptop mode is on infrastructure,
Wireless access point is enabled.
List of access on the router is enabled,
No encryption is used until I have runAny ideas any help?
Thank you
Hello
Have you activated the wireless antenna?
Please check if the switch wireless on the side of the unit is on. Also check if the wireless is turned on with the FN + F8 key combinationPlease check this possibility
Concerning
Maybe you are looking for
-
When I join my sync account, there is no shown capcha. What should do?
When I join my Firefox Sync account (24.0 Mozzila Firefox) in the first window, I asks me to enter my e-mail address, password, confirmation of the password, server, to put the tick, if I agree with the terms of use and privacy policy. "But there is
-
How to change vi (tile bar icon)
Hello How can I change VI tile bar icon? All the best Gabriel Oliveira Brasil / RS
-
I am installing a psc2210 aio to my hp computer that uses windows 7 Home premium. I deleted print devices and updated the drivers, selected PSC 2200 series and still nothing. Ideas?
-
Acer E1-510 card reader does not not after upgrade to win 10
Hello Afer upgrade to win10, card reader does not work. I tried to install the drivers: CardReader_Realtek_10.0.10125.31214_W10x64_A and CardReader_Broadcom_16.0.2.8_W81x64_A, but without success. I installed an and restart and no results. Same with
-
Error Windows Defender 0x800106ba after installing Microsoft Security Essentials
I have Vista Home Basic. I installed Microsoft Security Essentials, now Windows Defender gives me an error 0x800106ba message whenever I try to start. Does not work in conjunction with each other? And if so how can I make them work together?