Satellite A210-16F cannot burn CDs or DVDs...

Similar Questions

• Satellite L30-113 - cannot burn CDs or DVDs

  I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

  Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

  I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
  I have no idea on how to fix this unit "corrupted".

  Hi mate,

  I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

  After that, I again was able to burn DVDs.

  In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

• Satellite M70-173 - cannot burn CDs or DVDs

  Hello

  I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
  I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
  I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

  It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

  I have the following options:

  1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

  2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

  I made copies pdf of burning errors I can post if necessary.

  Any help is welcome

  Kind regards
  Juan

  Hello!

  > I made copies pdf errors burning I can post if necessary.
  Yes, I think it's a good idea. ;)
  Otherwise it of a bit difficult to help you.

  But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
  And you should burn on a lower speed for CD e. g. 16 x.

  Good bye

• Satellite A40-231: cannot burn CDs or DVDs

  Hello

  I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.

  I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.

  My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.

  Here are my specifications:

  Toshiba Satellite A40-231
  Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
  System dual boot: Windows XP SP2 and Linux Debian Sarge

  Hello

  In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
  You must use these mediums as they are tested and should work correctly.

  Another tip:
  Go to start > run > and start recording with a command regedit

  Delete values
  upperFilter and UpperFilter of this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  I've done on my laptop and noticed some improvements

• Satellite A210-16F - cannot switch to "standby" mode if I have the performance mode

  On my Toshiba Satellite A210-16F glitch:

  When I high performance on laptop it does not fall aspleep. But when I have Power saving mode then all is good. He aspleep to fall. Do you know how is it behaves?

  Where is the problem?

  Great news, buddy! :)

• Sometimes the Satellite A210-16F cannot turn off

  I have laptop Toshiba Satellite A210-16F and it won't turn off sometimes.
  Happens to the window "Stop", but it wont close and stays like that until what I stopped it manually by holding the POWER button.

  What could be a reason for this problem?

  Sometimes I can't stop my laptop or closing procedure crashes as impossible to close some of the processes that are running in the background automatically.

  In my case, sometimes it software Adobe acrobat reader crashes and I have to manually close this process (in the Task Manager).

  In most cases, the operating system cleaning can help I use the program known. CCleaner. It s free and you can clean the system and the registry.
  There are also other applications that could do the job so but I m satisfied with this program.

  Maybe this will help you too

• Satellite A60 no longer burn CDs and DVDs

  Hey, somebody help me.
  My A60 laptop no longer burned CDs and DVDs.
  There do not seem to read empty discs.
  Some regular she reads, but will not start and some, it will not
  not even start.

  Hello

  Sounds like a damaged disk device.
  Usual that these problems occur if the lens of the player is unable to calibrate correctly.
  In my opinion it has not much to do. I don't think that the replacement of the drive will solve such a problem.
  As the authorized service partner Toshiba for a reader compatible and taken in charge.

• Cannot burn CDs or DVDs, get code error 380381-26-00037200

  Original title: DVD problem

  I can't burn a cd or a dvd, error code 380381-26-00037200 appears. CD DVD & cannot be formatted

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Satellite P755-S5262 cannot determine if the DVD drive can burn a CD or DVD

  I recently acquired the P755-S5262 and cannot determine if the DVD drive can burn a CD or DVD.

  The description of Toshiba wrote:
  Drive DVD SuperMulti (+/-R double layer) supporting up to 11 formats but I can't imagine that a laptop of this caliber cannot burn a CD/DVD.

  I can't find an answer or a description nowhere else.

  Someone on this site/forum can answer my question?

  Hello

  The CD/DVD drive can burn CDs and DVDs

  I recommend using compatible diskettes... I use TDK and DVD r CD and they are really cool

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Satellite A200 cannot burn CDs

  I have an A200 - 1 GB and I can not burn CDs and DVDs only. I tried different programs, but it was the same thing.
  What can be the problem? I want to update my driver, but I don't know which driver is from the download page. So, please help.
  Thank you.

  Have you used the CD s mentioned in the user manual?
  As far as I know Toshiba recommends to use the CD manufacturers listed in the user manual

  However, the problem of material is possible in this case that replace the CD/DVD drive

  Good luck

• Satellite A210-16F - BIOS update gone bad

  Yes, the flash upgrade did not go with me as, like many I've seen. Weird that toshiba recommends a bios flash when you get the errors of installation win7 / vista, and have many fail.

  I tried 3 versions of different bios of the internet, 2 from the site of toshiba (2.0 and 2.1, I thought) and alaa200a.rom.

  When I do the disc of crisis with the crisdisk.bat (even do it in DOS) it copies all the files on the floppy disk, also tried different phflash versions. Older actually seem to load for 2 minutes, the most recent tend to charge for a few seconds then stops and starts loading again etc.

  Needless to say that all my efforts with these bios have not paid off for a bit.

  When I put the laptop normally and when I press the Fn key on the keyboard, the Fn actually lights up, but nothing else happens.

  Anyone who would have an idea what to do, apart from buying a new bios chip?

  Thanks in advance.

  PS, I have a Satellite A210-16F PSAELE

  Hello

  I think that you have to contact the ASP (SAV) to reflash the Bios. The Bios failure topics discussed almost every day and no one can give a good solution and more communicating with ASP.

  You can read an article that maybe can be useful for you:

  http://Web.Telia.com/~u43311424/crisis-recovery-disk/

• Downgrade from Vista to XP for Satellite A210-16F PSAEL

  Other users of laptops from Toshiba greetings

  I come to you with what I noticed to be a fairly frequent problem for users of Satellite A2xx - downgrade from Windows Vista to XP.

  I am owner of a 2 - day old of a Toshiba Satellite A210 - 16F PSAEL (AMD processor) and Vista Home Premium crashes on me during the installation of an application. So I searched the forum and found a full list of the XP drivers for the series equipped with AMD (my thanks for people who have set up their discoveries). I also found a guide to downgrade to XP, but it was the Intel-based and intended for users A200.

  My question would be if there is such a guide out there for the A210 series, the AMD-based or could someone please indicate the steps to follow for the downgrade.

  Thanks in advance

  Interested, too, that's why push this thread a little, aka a friendly BUMP ;)

  Michael

• Qosmio G30: CD/DVD drive does not burn CDs or DVDs

  Hi all...

  I use a laptop G30 and the moment where that I bought I couldn't burn CDs or DVDs in the drive using the!
  Whenever I have inserted a blank CD/DVD into the drive, it can not be read and an error message is displayed (E: / is not accessible incorrect function) when I try to click on the CD/DVD ROM.

  If anyone has an idea on what to do, please share it.

  Thank you

  Hello

  Check it please drive under recording tab properties and enable CD recording this option of drive. After doing this he test again.

• Satellite A210 - 16F PSAELE - always CPU 800 MHz instead of 1900

  Hello!

  My Satellite A210-16F (PSAELE) * still works with 800 MHz instead of 1.9 GHz *-even though I select the profile of full power. I reinstall Windows, but it did not help :/ Core temp tells me only 50 C temperature.
  If I try to run one last game it detect CPU at 800 MHz and output... His power profile not only hurt I think...

  I can perhaps try to load the latest BIOS and refresh it?

  * Does anyone know where I can download latest BIOS for Satellite A210 - 16F PSAELE? * I can't :( Former driver only, not ony BIOS update for my laps...

  W.

  Check the settings of the processor first and see if you can change something there.