Satellite M70 display: how to disable manually?

Similar Questions

• Satellite M70 354: how to change the display?

  Hello!
  My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

  Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

  Maybe you can help me.
  Thank you!

  You should know that the display is one of the parties outside the laptop computer motherboard expensive.
  The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

  That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
  The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

  I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

• Satellite M70-151 - how to upgrade the display driver?

  Hello

  as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

  I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
  After installation, I learned that he had to go on the manufacturer's site to get my drivers

  So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
  Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

  Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

  So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

  Thanks for your help

  / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

  ---------------
  Display devices
  ---------------
  Card name: ATI MOBILITY RADEON X 700 graphics card
  Manufacturer: ATI Technologies Inc.
  Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
  Display memory: 256,0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: (Standardmonitor)
  Monitor Max RES:
  Driver name: ati2dvag.dll
  Driver version: 6.14.0010.6587 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: Non applicable
  Mini VDD: ati2mtag.sys
  Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
  The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0 x 5653
  SubSys ID: 0xFF021179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel: ModeMPEG2_C ModeMPEG2_D
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  Post edited by: Sarahbella

  Hi Sarahbella,

  You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

  Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

  Download the driver and run the setup.exe file.

  Check this box!

• Satellite M70 - 181:How to unlock the keyboard?

  Hello

  My laptop Satellite M70 does not accept any input key when Windows has started. I suppose some kind of keyboard lock was accidentally activated. Anyone know how to unlock the keyboard?

  Thank you!
  Andreas

  Post edited by: Andreas_7

  Hello

  Check if the LED under the F10 or / and F11 keys lights.
  If yes then disable this feature with the FN + F10 or + F11 key combination

• Satellite M70-337: how to pass my memory?

  Hi all

  I was hoping someone could help me, I have the satellite M70-337 and 512 MB ram.

  I want to improve this, but when I click options next to my laptop it says my model does not, it means that I'm not able to upgrade my memory?

  Thanks for any help.

  Check you user manual you should find details on upgrading memory

• Satellite M70-309: how to clean the LCD?

  Hello world!

  I have Satellite M70-309, so how do I clean finger LCD, dust, ecc... ?

  Thank you!

  Hello Rocco,

  Usually mine clean with a slightly damp cloth (wipe softly on the surface) and then just dry with a cloth. This command removes all the dust and finger marks.

  I also used a normal domestic surface cleaning spray (used sparingly) applied with a cloth and this removes any greasy fingerprints that can be on the screen.

  It is very important to not to use cleansers, abrasives or solvents as they may damage the surface of the LCD screen.

  Kind regards

• Re: Satellite A300-234 - how to disable hypermemory?

  Please tell me - how can I disabled a feature on my A300 hypermemory - 234 with Windows Vista Home Premium?
  Graphics - ATI Mobility Radeon HD 3650

  Hello

  The forum contains already different discussions on the graphics memory how increase, disable, etc..
  You will already find interesting answers in that regard.

  But my question is: why you want to turn it off? Everything will be controlled automatically for the best settings and performance. So enjoy your laptop and have fun with it! :)

• Satellite Pro P - how to disable the hot keys for camera assistant?

  Is it possible, and how, to disable the shortcut keys for the camera wizard?

  The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

  I find this very frustrating.

  Hello

  Of course you can turn it off.
  You must remove the software from the camera in msconfig start up.

  So go to start-run-msconfig online online
  Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

  Good bye

• Satellite M70-159: how to set the APM mode on the HARD drive?

  Hello.
  I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
  I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
  How can I configure Mode APM?

  1.11 advanced Power Management (APM)

  The hard disk automatically switches to the mode according to energy saving the
  setting the APM mode under the inactive state.
  The APM mode can be selected with a number of sector register of ALL
  Control FEATURES (EF).
  The disk complies with the three types of modes of the APM which a command
  from the host is necessary.
  EN = 05 h: enable APM
  SC = C0h - FEh: Mode-0 Active Idle? Idle low power
  SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
  SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
  EN = 85 h: disable APM (Game Mode-0)
  Active Idle: The head is in a position of extreme inner disc
  Middle. (VCM Lock)
  Overview of the unit
  1-14-C141-E224
  Low power Idle: the head is unloaded the disc.
  The spindle motor.
  Standby: the motor stops.
  In Mode APM-1, which is the default APM mode, operational status moves until it
  Finally reached "low power idle."
  Table 1.7 Advanced Power Management
  APM mode
  Idle assets
  (VCM Lock)
  Idle low power
  (Unloading)
  Standby
  (Spin-off)
  Mode-0 0.2 to 1.2 s min. 15 s/o
  Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
  2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
  When was the maximum period during which the hard disk waiting for orders
  exceeded:
  Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
  Inactive power in 15 minutes.
  Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds.
  Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
  Low power idle mode goes into sleep mode.
  Note:
  The default values for these settings are reflected in the values of WORD 91 of the
  Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
  (the default) to power off.
  The above mentioned is time until the transition to each mode of power based on the point
  that the reader becomes a State of waiting for order.

  How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

  Where do I put? Please help me.

  Hello

  You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
  Here, you can change the settings for the APM mode.
  Unfortunately the other options to disable the APM Mode are not known to me.

• Satellite L655-1HC - how to disable Bluetooth using Win 10

  Hello

  I am using TOSHIBA SATELLITE L655-1HC, recently upgraded to 10 of Windows, but my Bluetooth is not be disabled.

  I tried everything, but no result at all. I think maybe it's like the driver support for Windows 7.

  How can I for me? or is there another solution to make of (the necessary key is missing, by the way).

  1. go to "Device Manager".
  2. in Device Manager, expand Bluetooth.
  3. right click generic Bluetooth adapter and update the driver.
  4. re-start.
  5. now you should be able to turn off/turn on the BT

• Satellite Pro A100: How to disable the card Board?

  Hello

  How can I disable the on-board its on my Satellite Pro A100?
  I can't find an option in the BIOS.

  And it is also possible to use the card reader with Ubuntu Linux?
  It is not up the cards.

  concerning

  Hello

  You want to disable an internal device?
  I wonder why

  However, you can disable it in Device Manager should mark the sound card, and then turn off.

  > And it is also possible to use the card reader with Ubuntu Linux?
  Why do not you will need a Linux driver that would be compatible with the card reader.
  As I m not wrong not the driver is from Texas Instruments

• Satellite A660-156 - how to disable this icon?

  How can I disable THIS thing & what it is? This shows up in flash internet playets & else. Help, please!

  Screenshot is less than
  [http://www27.zippyshare.com/v/7862181/file.html]

  Thank you!

  Hi vazovsky,

  To be honest I've never seen this icon on my Satellite A660 and I don t have any idea what it could be because it s non-English language. Perhaps you can translate it, that would be helpful.

  Do you run the preinstalled operating system from Toshiba?
  And when it is not, what programs you start?

• Satellite P500-193 - how to disable the multimedia Panel?

  Hello!

  I just bought a Toshiba Satellite P500-193. It's great, but I have a problem. During online games and other games my hand sometimes 'click' on the media panel and then windows media player star and game is minimazes in the bar system :(

  How can I turn off this Panel the temporary? Photo of this Panel: http://yfrog.com/87toshibasatellitep50002j

  Hey Buddy,

  I checked my Satellite P500 and it seems that you can disable temporary t these buttons of illumination.
  You can completely disable the buttons of the illumination in the BIOS (the BIOS setup > advanced > System Setup). There is an option called function key. You must set it to disabled.

  But I m wondering about this problem, I put t he have while playing games. Alternative, you can connect an external keyboard to play games. :)

• Satellite Pro S200 - how to disable the volume button digital on the screen

  Hello

  I have a Satellite Pro S200,

  I'm unhappy with my digital volume.
  Dial whenever I work the volume control.
  Is there a way to disable this annoying feature?

  was soon simon

  Hello

  The volume indicator belongs to the Toshiba control utility.
  The exe file is called Volumeindicator.exe

  On my laptop, this tool is running in the background of the OS and I can disable in msconfig-> Startup tab

  Select this check box.
  Run msconfig, go to the Startup tab and uncheck the Volumeindicator.
  Then, you will have to start again.

• Satellite A215-172 - how to disable WIFI on Windows 7?

  I followed the instructions on the site and install Windows 7 on my laptop. Now I have a problem - my WIRELESS function NEVER drops. Activating/Deactivating Flashcards has no effect. The material in front of the laptop switch no longer works! I turn it off and I'm still in the wireless LAN.

  The hardware switch is also only a software function as all on Toshiba fn keys and how do I turn off my WiFi?

  p.s. under Vista OEM everything he has worked

  Hello

  This model of laptop doesn't know me. You have the Satellite A210 or A215?

  In the history, I see a problem only. You compare Vista supported with Win7 not supported for this model of laptop.
  Describes the way how to toggle WLAN has reason, but if you do not use Win7 drivers, tools and utilities, I can't imagine it will not work properly.

  So what drivers, tools and software do you use with Win7?
  Where you downloaded Win7 tips for your laptop model?