Satellite P10 824: modem driver does not install

I have a tosiba Satellite P10 824 and the modem driver not install what can I do? This page driver is installed but the modem does not work.

Hi Cienciala

If the reader is already installed and the modem is correctly listed in the Device Manager, do not try to install it again and again. I advise to enter the properties of the modem in the device and on the diagnosis tab Manager list, you can use Query modem and verify the results.

If the modem does not work it may also be the configuration dial problem.
By the way there is also a useful site, you can check http://support.toshiba-tro.de/kb0/FAQ35006G000UR01.htm

Tags: Toshiba

Similar Questions

  • Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

    I use Windows 7 update.
    Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

    Is this the driver you are looking for?
    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

    Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

    No, these aren't the droids, uh, I mean the drivers he was looking for.

    In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

    I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

    Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

  • Re: Satellite A65-S1067 - display driver does not work

    As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

    Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

    Can someone help me with this?

    Hello!

    You use the factory settings on your laptop computer or you have installed your own version of Windows?
    And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
    http://www.CSD.Toshiba.com

    And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

    Sorry, but at the moment I can t tell more.

    Good bye

  • Satellite 2430: CD/DVD drive does not work - i/o error

    Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
    F:\ is not accessible.
    The request could not be performed because of an i/o error.

    I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

    Begging you a lot
    Michael Borger

    In my view BIOS update will not change.
    I assume that the reader has worked in the past with the same BIOS version
    It is a drive hardware problem or some registry keys are corrupt.

    I think that it s a hardware malfunction may be a matter of lenses.
    But try this;
    Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

    Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
    The firmware should again loads.

    But if these procedures help t, I don t see it differently as for replace the drive

  • Satellite P20-801-WLAN driver does not

    Hello

    AI? ve formatted my laptop, I forgot to make a backup for drivers disk. I downloaded all the drivers, but W - LAN driver does not somehow.
    The Windows operating system does not recognize the W - LAN equipment. Help needed!

    See you soon
    Moiz

    First have you ever used the WLan on this laptop?
    Are you sure that the WLan CSA has been installed?

    Check Device Manager if there is no yellow exclamation point.
    Have you used a good driver WLan?
    I found on the page of the driver Toshiba Atheros, drivers Toshiba and Agere.

  • Satellite A350-CD/DVD drive does not appear

    My CD drive does not appear in my computer and no longer works

    Help, please!

    Thank you

    Hi denis,.

    It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/314060

    In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.

  • Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

    The CD/DVD drive does not appear in the window manager and I can't incert CD
    The BIOS displays "none" instead of "optical device".

    This means that the CD device is dead?

    Hey Micky,

    Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

    Check also that it is not displayed in Device Manager and if it is remove before trying the above.

    Kind regards

  • Satellite A60 DVD - RW drive does not

    Hi guys,.
    The DVD - RW drive does not read anything I put in it.
    He works certainly (in some form) because it runs on start and when I put a disc inside, but he can't always SEE.

    I tried to uninstall/reinstall the drive itself, uninstalling/reinstalling the driver. I searched on the net for drivers (thinking that the driver file was corrupted), but I couldn't find a driver for the DVD-RAM.

    I was restarted after each task but still no luck.

    Help, please

    Thank you
    Dave

    Looks like a dead drive. I think it should replace the disk.
    Try to contact the ASP in your country, and it will get you more details.

  • Satellite P10 - 554 dvd - ram does not work

    I got a Satellite P10 554, and as I said above the RAM does not work.
    It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
    It is impossible to install the new drivers or update a firmware somehow
    (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
    (firmware update: I still got the message: invalid drive to update f/w)

    I hope that someone of you can help me ;)

    Hello

    What did you mean with the work of t car doesn?
    You are not able to burn or read the media?

    The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

    Try to remove the drive from Device Manager, and then shut down the laptop.
    Usually after restarting again the operating system should recognize the drive again.
    If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

    It will be useful.

  • Satellite P10 TV OUT button does not

    Can someone help me, I recently rebuilt my laptop Satellite P10 and now noticed the TV OUT button on the side right does not work. The OS is XP PRO

    I can use the F5 key, but who want to get this dedicated button works, someone at - it ideas

    See you soon

    Dave

    Hi David,

    When you have rebuilt your laptop you re-install the operating system and all the utilities Toshiba? I think that the button that you are talking about is controlled by the Toshiba EasyKey utility.

    HTH

  • Satellite X 200: WLan driver does not work with Windows XP Home edition

    Hello

    I'm trying to get WIFI on my Satellite X 200 XP. I downloaded the drivers of these 'wlan-intel-1244-7147"but still no luck, also after installing these drivers, I get an error when I stopped saying" sample program does not.

    This is a new installation of XP complete, I gave up with Vista.

    You have an Intel WLan card or the card Atheros WLan?

    Perhaps you have used a just a bad driver

  • Qosmio modem: after update the modem driver does not work

    Qosmio F10-145 with WSP2 MCE.
    Yesterday, I installed Phone Dialer Pro. Then, I realized that the microphone did not work with this program.
    The help file suggested upgrade modem driver that I then downloaded from the Toshiba site.
    It was the last time that my modem was working.
    I tried everything: from the update to restart in SafeMode as administrator, remove the driver and reinstall it from the Tools CD, use SFC and all I get is an 'access denied' message at the end of the installation process.
    System Restore doesn't work anymore as the last point of available restoration after the "Reinstall".
    I called help line of Toshiba which suggested resettlement of the entire system using the recovery CD... That would take days (programs, updates, mail files + digital certificates...).
    The last option that is somewhat like a spare wheel, as it has to install an external modem PCMCIA. This worked well but is frustrating because there is a modem already installed.
    Also, why don't I have any problem installing external modem, but cannot install one that is already there?
    Any suggestion?

    [Edited by: admin on 24 June 05 19:18]

    Hello

    As far as I know Toshiba Software modem is connected to COM 3.

  • Satellite A500 DVD/CD Driver does not (can't read the discs)

    I want to install the new Windows 7 and I insert the disc. Nothing happens. I go to my computer and try to open the disk drive or explore this and it shows nothing.
    I checked with other CD and it does not work. DVD do not work tho...

    What's wrong?

    Hello

    Maybe it's dust on the lens you have clean the lens using a microfibre cloth? If this is not the case, check this box!

    You should try to remove the top and lowerfilteres in the registry of the alternative. Follow the instructions of this workaround MS:
    http://support.Microsoft.com/kb/314060

    I had a similar problem and after removing the upper part and the lowerfilters it worked again! :)

  • Satellite M30x - new HARD drive does not work

    Hello.

    I am installing a new ATA 2.5 "internal hard drive for my Toshiba M30X-166. The drive is a Seagate Momentus 5400.3 120 GB model. The laptop does not recognize the disc and no related error message appears, and in the BIOS, it shows as "HD not available."

    I put this drive in an external USB - IDE enclosure and was detected by my desktop PC, and I was able to partition and format the Momentus, so I know the drive is indeed work, but my M30X still does not detect the drive.

    What can I do to make the laptop recognize this unit? The BIOS M30X is: Phoenix EAL20 version 1.90.

    Thanks for your help.

    Hello!

    Have you tried another HARD drive? The new HARD drive is may not compatible with the laptop or does work does not correctly.

    Normally, a 120 GB HARD drive should work because the laptop has a limitation of LBA 28 bits and so you can only use hard drives 120 GB.
    In the worst cases, the HARD disk on the motherboard controller is defective :(

    Good bye

  • Satellite L755 - CD/DVD drive does not

    I own Satellite L755 and the dvd rom does not work (do not read disks and show on the disks in the computer).

    When I go into the Device Manager in windows it displays error code: 39 which means that the driver is defective.

    It is not the first time its happening.
    It happens after a few months and I need to back up and do the system recovery each time.

    Is there a way to fix this without making the system recovery each time?

    Hello

    Try this workaround:

    Go to Device Manager and remove the CD/DVD drive entry (mark and press DELETE)

    Then start the registry and remove the filters above and below the following key:

    HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class------{4D36E965-E325-11CE-BFC1-08002BE10318}

    It may be useful

Maybe you are looking for

  • How can I remove the footer and header view print?

    The function "file > config page" does not display the options to remove the footer and page header. This has happened Each time Firefox opened == I try to print

  • iPhoto 11 works with el capitan

    I have a neighbor with a mac that uses exclusively with iPhoto and do not like the new photo app.  If he updates to el capitan iPhoto still work?   It has an iMac 20 "running os 10.10.5.

  • Home HP desktop with user created question discs DVD HP

    Hello I'm helping a friend with their desktop HP home computer they were able to create a couple of recovery DVD disc HP sets a June or July and another set it beyond seven. I wonder when they are created, create the recovery image as the status of a

  • Switch default behavior - PXI2503

    Good afternoon I have a few questions about the behavior of my 2503 PXI switch module.   When I close a relay on my switch I hear the click predicted.   Therefore, it leads me to think that something in the breast could wear out over time... I want t

  • Can I recover my data in an external drive that I have formatted mistankenly?

    I formatted my external hard drive by mistake and I lost a lot of data (7 years of work). So, I really want my data back. Would this be possible? How?