Satellite P10 crashes when using the USB port

Similar Questions

• HP Deskjet 1010: Wireless printing through a TG1672G of ARRIS, use the USB port on the modem?

  It is possibel to print wireless with a TG1672G of ARRIS, use the USB port on the modem?

  Hello

  There is no print server function so you can not:

  http://gditechnology.com/manuals/Arris_TG1672G_Data_Sheet.PDF

  Kind regards.

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• Can not use the USB ports on my Satellite P10

  I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

  Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
  Any suggestions? I want to add an external mouse drive DVD etc...

  Any help appreciated... Mark

  Hello

  Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
  I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

  The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

  In Device Manager, you may turn off the power save the unique option to the USB ports.
  You can do this in the properties of the USB port

  Additional I advise to use a USB hub with external power clean.
  These devices are not very expensive and will allow you to connect and use several devices together.

• Satellite A30 crashes when starting the Bios when you insert a USB

  My A30-104 laptop hangs when starting the bios, whenever I insert a USB key into the USB port.
  The only message that appears at the bottom of the screen and the message is something like this:
  Press F12 for the boot configuration or F12 for...

  Pressing F2 or F12 does not change the start state.
  Note that Microsoft XP Home SP2 is installed on the machine.
  No idea why startup is suspended?

  Thank you
  Sam

  Maybe the laptop tries to start the USB, but it is not possible to
  It's just a suggestion, but I remember that something similar happened to a friend of mine.
  The printer is connected to the USB and the laptop could not start in the OS.

  Well, maybe we can solve this problem on the laptop you by changing the boot order in the BIOS.
  Please enter the BIOS and change the order on the disk HARD - CD - etc.
  Make sure that the HARD drive was chosen first

• Use the USB port to emulate keyboard

  Hello

  Is it possible to use a USB port of an on-board controller (PXI8108) to replicate a keyboard when plugged on a device waits

  a USB keyboard?

  Thank you

  Gary.

  What I understand about USB, I don't think that you can do.

  The USB ports on the PXI controller host ports are and as such cannot be used as ports of the device. A keyboard would be a HID device class. Maybe it's a kind of emulator HID that could be placed between the PXI and your USE awaits a USB keyboard...

• Using the usb port causes my computer to restart

  When I plug anything into a USB my computer to restart trys, it does not restart correctly until I have remove the item from the usb port.  I have a printer plugged into a USB at the back of the computer and that works fine, but if I try something else in the same port, even just a stick of memory, he knocked out the computer!  Any help appreciated.

  Hello kaydee16,

  I would say confirming that you are up-to-date with the latest firmware, drivers, and updates to the BIOS of your manufacturers Web site.

  How long have you encountered this problem?

  Did you of recent changes made to your system, before having this problem?  (installation/uninstallation software/hardware)

  What version of Windows XP and SP are you currently using?

  What anti-virus software are you currently running and when you ran a full scan last?

  Please let us know status.

  Thank you

  James

• Aspire Switch 10: Keep connect-disconnect keyboard-HARD drive repeatedly while using the usb port

  Hi all
  IAM facing this problem months ago
  It is very disturbing especially iam fan of mouse normal (I hate the touchpad), last week he keeps disconnection/connection too.
  I think that there is a software bug that connect the usb port with usb 3 connecting the keyboard/HDD

  Then
  Please help me.

  update BIOS to the latest version if you have not already:

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.08_A_A.zip?acerid=635639807628234039&S...

  Update Firmware on keyboard too if you have not already:

  http://global-download.Acer.com/GDFiles/patch/firmware/Firmware_Acer_D12_W81x86_A.zip?acerid=6355820...

• Using the USB port on the machine host ESXi 4

  Is it possible to connect to the USB ports on the virtual machine host server? Documentation has said USB controller does not work with ESXi. Does perform a work around?

  Thank you

  Safar

  If you have a recent server that supports Intel Directed i/o / AMD IOUMMU, then you can try VMDirectPath - http://www.vm-help.com/esx40i/VMDirectPath/USB_Setup.php.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Satellite A100: How to use the IrDA port with cell phone?

  I have a laptop with an infrared port that I can use with another computer.
  Now, I have a problem with my laptop at home, A100 series.
  I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
  If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

  I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
  What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

  Thank you
  Petri

  Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
  What cell phone do you have exactly? Satellite A100-xxx

  IrDA option appears in the control panel?

• Satellite P750 - overheating when using the graphics card

  I have a Satellite P750. I have a few games that I love to play, but I am unable to because that laptop overheating during the execution of these games.

  The specifications of the P750 with GeFORCE 540 m graphics card and 8 GB of ram easily meet the requirements of the games (Counter strike source, cod mw3).

  While playing the games for about 10 minutes, all right.
  After this step, things start to warm up, and small defects appear on the screen.

  Small rectangles of messed up graphics.
  If I don't leave the game immediately, I get a BSOD with errors such as "IRQL _less_than_or_Equal.

  The vent on the left side of the laptop runs very hot when this happens.
  I cleaned dust vacuum on and uses a fan/cooling pad to try to cool it.
  Makes no difference.

  I updated to BIOS and graphics card drivers

  WHAT CAN I DO TO PREVENT OVERHEATING WHEN YOU USE THE GFX CARD

  Hmm using the page of the Toshiba driver graphics driver?
  Such driver is a bit different from the other nVidia drivers because it s modified for mobile use. It contains some kind of overheating protection.
  In case of higher temperatures of GPU, such driver would clock down GPU performance in order to increase the temperature of the GPU.

• Satellite P10 804: cannot use the day before and the FN keys / hibernation

  Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.

  The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.

  Hello

  May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
  Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.

  The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.

  Other questions?

• How to transfer photos to computer Olypus softwear to a memory stick using the USB port on the computer?

  Have a ceiling of memory 2 GB Kingston Data Traveler 100 memory stick (w) technology. Want to down load a series of photos already on computer with master Olypus softwear registration. Should what procedures I use to achieve this? Please specify all measures to achieve this transfer process. Thank you

  For the task that you describe... I do not see the need
  for the Olympus software.

  Insert data traveler into a USB port and go...
  Start / computer.

  The data traveler must be recognized as a
  Removable drive with a drive letter.

  OK... now that you know the drive letter... If you right
  Click a selected group photos or an entire folder
  You should be able to choose... Send to / removable
  Disk (? :))..) .This must copy the pictures to the data
  Traveler

  Make sure that the photos are in one or more records because
  the number of photos that you can copy to the directory root
  may be very limited. And you will receive the following error:

  "Impossible to copy the XXXX: failed to create the directory or file.