Using the USB port on the machine host ESXi 4

Similar Questions

• Compaq: Hi I have a compaq mini 110 I forgot the passwword and it prevents me from using the machines

  Hi I have a compaq mini 110 I forgot the passwword and it prevents me from using the machines please help this serial number is

  IT SHOWS THE FAILURE OF THE SYSTEM ORDER CNU9418FNF FATAL ERROR PASSWORD CHECKING

  @wisejohn80

  Enter: e9lov3u898 (3rd character is a lowercase L)

  Kind regards

  DP - K

• VShield service Manager installation and vShield app to the same host ESXi

  Hello, I'm planning on vCloud Director assessment in a laboratory with only a single ESXi host.  When I try to install the app vShield service I get the following warning: do not install on a host or a cluster where the VC or the vShield Manager resides. This can cause network problems. The following IP address must be a unique IP address assigned to this unit of App vShield. Please do not use an IP address that is assigned to another machine, including the VC, vShield Manager or any ESX host. Using an incorrect IP address you will need to uninstall and reinstall App vShield on this host. My question is: is it is absolutely impossible to install vShield manager on the same host ESXi as the vShield Manager resides?  Or is it just a bad practice?  What are the ramifications of installing?

  It is a general practice to separate management and resources. What you see is just a warning. When there are very fewer resources available you can do. Make sure that you exclude from the required VM by referring to this post

  http://www.yellow-bricks.com/2012/03/17/excluding-your-vCenter-server-from-VShield-app-protection/

• Create a virtual machine using the ubuntu (host of W7) partition

  I am running Windows 7 and 8 of VMware Workstation.

  The disc is actually a raid-0. There are 3 partitions: (Dual-boot)

  -Ubuntu (64-bit)

  -System reserved Windows

  -Windows (64-bit)

  I am trying to create a virtual machine under W7 using the Ubuntu partition.

  I tried 2 things for step 'select a physical drive:

  -Use individual partitions. The problem is at the end, when you click Finish. I get the error: "one of the provided parameters is not valid."

  -Disc use whole. The virtual machine is created, but when I turned on, I get the error:

  "Could not open the disk ' C:\. [..] \Ubuntu 64 - bit.vmdk' or one of the snapshot disks it depends on.

  Reason: the physical disk is already in use. »

  Thank you in advance for answering,

  Kind regards.

  In my tests I couldn't use a host physical diskwith a Windows 7 without setting the disc 'offline '.
  But then you can set the diskette from Windows Startup 'offline '.

  Using Linux or 2003, you don't have this problem.

• Why any material I install using a USB port cause my computer access to the screen asking how I want my computer restarts in safe mode, safe mode with network etc.

  I USE WINDOWS XP PROFESSIONAL

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your USB using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Method 3:

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

  Hope this information is useful.

• Using the guest host as operating system operating system

  When using VMware Server, if you install it on Server 2003, can use you your host operating system in your guest OS.  Or would you have to install another copy of it?

  Just trying to make sure I have good understanding.  If I install XP as a guest operating system, which is accessible remotely.  In addition, the same image can be created again and again or should I create a new serial numbers don't?  I'm fine with the purchase of new numbers of seria, but did not know how to create the guest operating system has worked.

  Consider each virtual machine comments as another computer.  So, everyone needs an operating system installed.  You can install the same host operating system, but it is a different facility.

  Microsoft allows you to use product keys Windows 4 ~ 5 times and then they will not activate them.  So if you remove an active Windows VM, that use of the key is lost.

  You may be able to copy a virtual machine already activated without having to re - activate, I'm not sure.  Like to do a clean install of Windows XP, activate and update, then copies of the virtual machine before you install additional software.

• IPs much-needed to the SCANNING resolution using the file hosts in Oracle11g CARS

  Dear Expert
  
  By Ref.
  Configure FCAC with TAF Oracle11g r2 instead of use the SCAN
  Re: Configure FCAC with TAF Oracle11g r2 instead of use the SCAN
  
  How address IPs will be required in two-node RAC deployment to resolve the SCAN feature by using the file/etc/hosts.
  
  We want to use the TAF feature for Oracle 11 g r2 RAC database access, so I'm providing the default configuration of the file tnsnames.ora and listener.ora
  
  Please confirm that all the necessary changes to the use of the TAF.
  
  find the tnsnames.ora RAC node-1 content
  [oracle@aaarac1 ~] $ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  AAADB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = aaadb)
  )
  )
  
  find the content of the listener.ora RAC node-1
  
  [oracle@aaarac1 ~] $ cat /u01/app/11.2.0/grid/network/admin/listener.ora
  LISTENER = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  # line added by Agent
  LISTENER_SCAN1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))
  # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
  
  
  find the tnsnames.ora RAC node-2 content
  [oracle@aaarac2 ~] $ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  AAADB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = aaadb)
  )
  )
  
  find the content of the listener.ora RAC node-2
  [oracle@aaarac2 ~] $ cat /u01/app/11.2.0/grid/network/admin/listener.ora
  LISTENER = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  # line added by Agent
  LISTENER_SCAN1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))
  # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
  
  
  Concerning
  Hitesh Gondalia
  
  Published by: hitgon on August 10, 2011 06:38

  hitgon wrote:
  Please find details of Production site of our
  DB: Oracle11g R2 RAC 11.2.0.1.0
  OS: Redhat Linux5.3 64-bit

  Acute, we will use only an ip scan in the file/etc/hosts in node 1 of the FCAC and not to use any DNS.

  Hello

  If you use the host file then you can only have 1 address SCAN

  We want the user client application TAF and FAN VIP connection string.

  JDBC: thin: @(DESCRIPTION = (ENABLE = BROKEN)
  (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(Host = 10.106.1.251)
  (Port = 1521)) (ADRESSE = (PROTOCOL = TCP) (Host = 10.106.1.252)(Port = 1521)))
  (FAILOVER = ON) (LOAD_BALANCE = on) (CONNECT_DATA = (SERVICE_NAME = aaadb)
  (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)))

  Please suggest...

  Seems OK for the adjustment of TAF

  See you soon

• Firefox uses the windows HOSTS file?

  When you use Microsoft Internet Explorer, the HOSTS file is used to block unwanted sites to load. Firefox checks this file before loading these sites?

  Yes, I use the hosts file and it works with Internet Explorer and Firefox.

• I just bought everything in one6520. What do I need to plug the wireless feature to use the machine?

  I just purcahsed the 6520 printer all-in-one. Really need not part the pkg wireless but wiil I still have to configure it to use the basic print/copy/scan?

  Hello

  For a computer, simply connect via USB to get the AIO printer functions.

  Kind regards.

• Error when you try to use the webcam: host process Windows stopped working-RUNDLL32

  RUNDLL32

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  I read this from an old thread in this forum.
  Here is the suggested solution...
  Disable the webcam.
  Start button > Control Panel > Classic view > Folder Options > view > first entry,check "always show icons never thumbnails" > OK.

  Open your Webcam again. The message is passed now?
  If so, turn off the webcam.
  Back to Folder Options > uncheck the first entry "always show icons never thumbnails".

  Open the webcam again. The message comes back?
  If not, problem solved.

  Source:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/46d915fb-E470-41c6-A4de-dc56d05e258f

  t-4-2

• Help create messages Syslog uses the router host name

  We currently have an IP SLA related to the EEM scripts that work great to send syslog messages to alert purposes.  However, I would like for each router that sends a syslog to send its host name using wildcards instead of the specified host name.  I'm guessing some sort of filtering would do the trick, but I can't find any good documentation on this topic.  That's what I currently have:

  ALS IP 1
  echo ICMP - 172.24.50.1 source-interface GigabitEthernet2
  threshold 250
  timeout of 1000
  frequency 5
  IP SLA annex 1 point of life to always start-time now

  !

  LAN_interface_Link_down event manager applet
  syslog "Interface GigabitEthernet2, state change downstairs" event model
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, LAN_interface_Link_down is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  LAN_interface_Link_up event manager applet
  syslog event model "Interface GigabitEthernet2, altered state until.
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, LAN_interface_Link_up is running on C1-GrandView-PA-CSR1000-Recover... »
  Next_Hop_LAN_Unreachable event manager applet
  event track 10 low maxrun 40
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, Next_Hop_LAN_Unreachable is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  Next_Hop_LAN_Reachable event manager applet
  event track 10 status place maxrun 40
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, Next_Hop_LAN_Reachable is running on C1-GrandView-PA-CSR1000-Recover... »

  You can use the action of information to gather the hostname:

  routername type info action 1.0

  message from syslog to action 2.0 "my name is $_info_routername.

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• Is it possible to use the box that esxi is installed as a virtual machine?

  I have correctly installed ESXi and established virtual machines using the VI Client. The virtual machines are installed with the operating system and on balance, everything works as advertised.

  PC, access the box of ESXi are far enough away from the real server. Is it possible to have a vm residing with the box of ESXi machine on ESXi box?

  Any help will be greatly appreciated. This is new territory for me.

  Ken

  Hey Ken. Good job getting everything setup and operation. Unfortunately you cannot 'see' a guest of the ESXi server. I suggest you bring a laptop with you on the server.

  If you have found the following information useful please consider giving points and or the marker said.

  See you soon

  Kevin

• Using the local host XAMPP with Wordpress and Dreamweaver

  I hope it's in this forum. It is probably more than one WP Theme DW, but I found this forum to be very helpful on a wide range of topics of web design/construction in general so here goes.

  I have a static website html/css, created with DW. I have like a local site on my computer and also have downloaded on a remote host (fatcow) server. It uses a temporary domain/address under development and will replace an exisitng site once completed.

  http://www.prospectrealty1.FatCow.com/index.html

  I installed WP on the remote host and created a Blog through the WP Dashboard. There is a link in the navigation of the static site on the WP Blog. When you click a new tab opens and puts it on the separate blog.

  http://prospectrealty1.FatCow.com/blog/

  I want to be able to work on a copy of the blog 'offline' on my local computer.

  So I have installed xampp and it works correctly on the C drive of my computer. Then I copied my entire local site folder in a folder under the xampp/htdocs. So, next I copied the folder that contains the installation of the remote host to fatcow wordpress (I named it 'blog'), I created and pasted in my local installation. So now I have localhost/xampp/perspective-blog-test/blog.

  Mark, the problem is that you are importing into a database.  Basically, what you have to do is this:

  -Connect to phpMyAdmin

  -Click on databases at the top (in the right frame)

  -Create a new database.  If you want to imitate as much as you can from the remote site, it exactly the same name.

  -Then click on this database from the base of the left hand.

  -Now you can click on import of the right hand of the window frame

  What you were clicking was previously the button import for a whole database and not only the tables in the database.  Because there was no import of data in this file that you and he had only tables, SQL server has generated this error.

• How to use the control host for creating folders

  I want to create a folder called abc in my C drive using forms 6i.
  How can I do this by using the Host command?

  Host('MD C:\ABC');
  

  François