Satellite P100-160 has no led speaker

Hello

someone can help me.
I got a Satellite P100-160 but not seeing under speaker.
Some might say if it must include the

Hello

Not all portable satellite P100 supports speaker lights!
It depends on the laptop model.
Sat P100 with Intel graphics don t logs support the speaker light and make the units with NVIDIA graphics card.

Tags: Toshiba

Similar Questions

  • Satellite P100-160: Question about upgrade HARD drive

    Hello

    I would replace the internal hard drive to a larger size, but I don't know who is compatible.
    Here is a link to dabs where they have 5 hard drives, but not sure if they will work.

    Would be nice to get some tips on this thanks.
    I have a Satellite P100-160 that currently has a 120 GB hard drive, it is not enough!

    http://www.dabs.com/ProductList.aspx?&NavigationKey=11154&NavigationKe y = 50540 & key = 40970000 & CategorySelectedId = 11154 & PageMode = 1

    Hello

    I downloaded the user manual for this laptop from the Toshiba page and it says that you can use the 160 GB HARD drive.
    I think that he n t be a problem to use a bigger like 200 HDD or 250 GB.

    Sat P100 supports a SATA HDD controller and you should therefore use the HARD drive 2.5 SATA.

    Concerning

  • Satellite P100-160 - several PCI bus do not work with a shadow video BIOS

    Hello

    I got my Satellite P100-160 for about five years now and have never had any problems like this before.
    A few weeks ago my system did not (or something like that), so I pressed the power down button to turn it off.
    Then, as he was put on, he seemed to freeze on the loading page and so I held the off button again.

    The present results are when I turn it on, I get a screen telling me several bus PCI etc do not work and he says 'video occult BIOS.
    I then have the option to press F1 to resume or F2 to enter setup.

    In addition, one of my USB slots has completely stopped working and my card slot has also stopped working.
    Can someone help me please? I'm on Windows XP, SP2.

    See you soon,.
    Liam

    Hello

    I think that you need to access the BIOS (press F2 when the laptop starts up) and put its default value.
    Then try to start the Vista again and press F8.
    Then you will get a menu of advanced start it you should choose repair computer.
    Vista supports a clean internal repair option, you should try this and must repair the operating system.

    If this will not help and you still want to not be able to start a view, then a system recovery may be the best option for you

  • Satellite P100-160 BT icon appears in the Control Panel, but no BT

    Hello

    I have a Satellite P100-160. I am very confused as to whether I have BT or not.

    * Reasons I thought that I had BT: *.
    I thought originally I had, because in 'Control Panel', it has a Bluetooth icon, which when I press on it opens the "Bluetooth devices". I also use WiFi I thought a sign that BT has been installed and working. I also notice that in Services' there is that something called 'Toshiba Bluetooth Service' running.

    * Reasons I think that now I don't have BT: *.
    However, when I press Control Panel > Bluetooth devices > Bluetooth settings, nothing happens. It's as if the button is dead. And when I try to 'Add a BT device', he finds not all devices. In addition, there is no BT listed in Device Manager.

    .....

    Overall, I am very confused! I bought yesterday wireless speakers after seeing the BT icon in Control Panel (I had read that if this icon was there, I got BT), but having struggled for hours trying to get BT to work yesterday, I came to the conclusion that I don't have BT at all!

    Could someone explain what it means the Bluetooth icon in the control panel? Why is there if I don't have BT? Or, the icon means I have BT but am doing something wrong?

    Thanks in advance! Very frustrated!

    David.

    > Satellite P100-160. I am very confused as to whether I have BT or not

    Satellite P100-160 was NOT equipped with Bluetooth module.
    But maybe the battery BT software has been installed and is why the BT icon is visible in the control panel.

  • Satellite P100-160 - screen Vertical burst

    Satellite P100-160 my son has developed a fault on the screen that no one seems able to identify the cause of.

    If you imagine that the screen is divided into six equal vertical columns about 3 inches wide, the third vibrates from top down so that the image is blurry. Sometimes it stops after an hour - but recently it just keeps going. The other "columns" are very good. What is the screen itself (easily replaceable), or the video card (on the motherboard) or another component such as the inverter?
    For now I'm not sure if scrap it and buy a new one or replace the screen.

    Any ideas?

    Hey,.

    I think that the best way to address this issue must connect to an external monitor to your laptop. If you notice the same problem on external monitor the problem is related to the graphics card itself. If the display is faulty and must be replaced.

    Then connect an external monitor and check what's happening!

  • Satellite P100 - 160 PSPAAE Vista: all my Toshiba Utilities stopped working

    All of my Toshiba Utilities stopped working.
    Message appears saying "* stopped working" windows is looking for a solution.

    It was after that updates have been installed in the correct order as posted earlier in the forum. Not only the value added package configfree as well as PC diagnosis, etc.

    I have a Satellite P100 - 160 PSPAAE under Vista Home Premium.

    Any ideas? I think that perhaps is McAfee Security Center has something to do with it.

    Hello

    I suggest the following: recover your machine and update tools and drivers again. I don't know if McAfee is the cause of your problem, but if a system is broken on the software side, then, among the most popular and useful actions is to restore the system, and then being happy when it works again.

    Would appreciate comments on your success.

    Welcome them

  • Question about the update of value added for the Satellite P100-160 package

    Hello

    I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
    I downloaded and unpacked. It contains three options:
    2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

    I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

    Can someone advise please that I should use?
    Thank you!

    Hi guys

    Value added package contains many different Toshiba and utility tools!
    Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
    This number can be checked on the bottom of the unit.

    I visited the page of the Toshiba driver and checked the details.
    You will find an info that this package installs a range of important public services.
    -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
    -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
    -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
    -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
    -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
    -TOSHIBA PC Di

    In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

  • Re: Satellite P100-160 - failed display driver installation

    Satellite P100-160, PSPAAE, 32-bit vista.

    Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

    The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

    To say that I'm pisseed would be an understatement. Can anyone help? Thank you

    Hey,.

    If Aero is not available I think that it s display driver problem

    In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

    If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

    Check this box!

  • Satellite P100-160 - system does not boot

    Hi all

    I was hoping someone may be able to help me with a problem I have with my Satellite P100-160.
    I was using it the other night without power connected when my battery ran out and he stopped.
    When I reconnected the power and it works I got the usual message asking if I wanted to start as normal I did.
    To do this i Gets the icon in the lower right corner telling me the system was trying to install a new mass storage device driver.

    He couldn't find it and I haven't added or removed something in my system.
    When I stopped and went to the re - start the next time, I received a message on the start screen in the sense of:
    error
    conflict of resources - controllers USB bus pci motherboard bus: 0a, device: function 04:01

    error
    resource conflict - controller mass storage of the pci on motherboard bus: 0a, device 04 function 02

    error
    resources - bus pci motherboard conflict: 0a, device: 04, function 03

    Press F1 to resume F2 to Setup

    I cannot go into the installer, but if I take the system just hangs and stop all the hard disk activity. I have managed to do successfully start once but no more, can't get into safe mode or anything. When I have it at my local computer store the guy he looked the error and said: it's broken, the motherboard has gone and there is nothing I can do with it. Im very disappointed that the laptop is only 2 years old and I would have thought that it would last longer than that.

    So my question s are the right guys, it's broken or is there something that can be done with it? If it is broken I can access the contents of my hard drive with another laptop (the guy from the store said something on to using a hard disk enclosure and use it as an external hard drive?)

    Thanks in advance for any advice

    D

    Hello

    It seems that the motherboard is affected
    In the message error - bus motherboard pci resource conflict: 0a, device: 04, function 03 the motherboard is mentioned, so everything looks like motherboard failure.
    But to be 100% sure you should ask the authorized Toshiba service provider of the opinion.

    Good luck

  • Satellite P100-160 refuses to connect to my router 3Com with WPA - PSK

    Help! My new laptop Toshiba refuses to connect to my router 3Com (f/w 2.06T13) model 3cWDR100A on WPA - PSK. The router only supports TKIP (no AES).

    The laptop, a Satellite P100-160 is under Vista Home Premium with the latest Intel 3945 11.5.0.32 driver and I tried the version of the site Web of Toshiba version mentioned in other threads (and a few other versions also).

    Either way, I don't like latest driver hit with content identical binary files and different date stamps or running of the anonymous installers that have not been digitally signed.

    The problem is that non-encrypted, or WEP works perfectly, but WPA - PSK is not. It fails with a diagnostic message 'timeout for secondary keys. The thing will be very occasionally connect to the network without a timeout (before I tried to improve things with the last pilot about 1 in 20 attempts after a reboot, now it comes rather from 1 to 100). If I can be sure that the password is correct. When it connects everything is fine and stable with excellent signal until the first suspended and then the connection is lost. It's more than a little irritating.

    I see several topics of doom similar networks to Vista support groups. They all seem to hinge around WPA - PSK TKIP and WiFi Intel chipset x 945 in combination with certain models of router. Please can anyone help solve this mess?

    I've seen other threads of networking in Vista by users with this specific Intel chipset and my router model having exactly the same problem and so far nobody has found a solution. I checked the basics of knowledge (MS & 3Com) and tried a few plausible fixes, but nothing helped. I'm out of ideas.

    It seems a little absurd to demote network security to make the latest PC works correctly. Dumping Vista (however tempting) is not an option.

    Thanks for any suggestions or diagnostics.

    Kind regards
    Martin Brown

    Hello Martin

    As you can see this is not Toshiba specific stuff and if there is no 'global solution' I don't really know what Toshiba should do about it. As you all know it should support hardware and software (driver), but if not I don't really see a solution for this.
    Who should offer a solution? Toshiba or Intel?  :|

  • Satellite P100-160, not compatible with the latest games graphics card

    My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

    Recently, another solution I've heard of is an external graphics such as the Asus XG station...
    http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
    either this...
    http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

    However these devices large need an express card slot, which I'm not sure that this laptop has even?

    If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

    Thank you

    Richard

    Hello

    The Intel graphics card is simply not powerful enough to handle the latest PC games.
    You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

    The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
    You cannot add also all other ports for laptop. It is not possible :(

  • Satellite P100-160: Mono sound when you use MciSendString() calling Winmm.dll

    I have a Satellite P100-160.
    The sound works well for some programs, Windows Media Player, etc. Audigy.

    However when I call for its program using MciSendString() calling Winmm.dll I get only mono sound channel, good times left channel is almost silent. SetAudio volume has no effect.
    I've updated the BIOS and the audio driver for the latest versions available on this site.

    Does anyone have a solution or pointer to a solution.

    Is it really a laptop problem?
    Maybe the multimedia function MciSendString() provides only the mono or your have done something wrong?  :|

    See Microsoft Developer Network:
    http://msdn2.Microsoft.com/en-us/library/ms709492 (vs.85) .aspx

    I don't know what you want to do and why you use the MciSendString() to call Winmm.dll, but if the sound display correctly using current players like Windows Media Player, for example, I really put t see any hardware problem m

    Note it is a Toshiba user forum and here you will encounter common users who share knowledge and solve common issues of interest.
    In your case, I recommend you to visit a few Microsoft developer forums and support sites.

    Best regards and good luck

  • Satellite P100-160 where can I get a new battery quickly?

    I got a Toshiba Satellite P100-160 (17 "screen version) for about three and a half years now and the battery is toast.

    The battery I States the following:

    Toshiba Li-ion battery
    Model PA3479U-1BRS
    PABAS078
    DC 10.8V

    Please could someone tell me where I can source a (official) new in a week?
    I guess that the best sources are online and so recommendations for online businesses in particular would be welcome.

    I do not want to export the wrong model and I travel abroad to marry in seven days and I want a notebook fully functioning take overseas with me.

    If you have seen how scary my missus is, you would understand the urgency...

    Thank you very much.

    Hello

    You can get and order all parts laptop local ASP.
    Get in touch with the guys ASP your county and ask for the battery.

    You will find the ASP in your country!
    http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

    Otherwise, take the battery part number and use google to find some online dealers!

  • Error unspecified retrieving system on a Satellite P100-160

    Hello
    tried to restore the system (vista home premium) 3 times on one Satellite P100-160 but no specified error it stops every time.

    Any ideas?

    Can you please describe this error? It's the same when you say to someone: my car stops every time at the same point on the road. Without a description of the exact error we/you won´t be able to you/you/us help... ;)

    So, please describe more precisely and more detailed because then someone could possibly think to... :)

    Welcome them

  • Satellite P100 - 160 PSPAAE - memory upgrade question

    Hello

    can someone tell me if it works in my Satellite P100-160
    Part number: PSPAAE-01D00UEN

    Kingston memory - 2 GB - SO DIMM 200 pin - DDR II
    Storage capacity 2 GB
    Upgrade to generic Type
    DDR II SDRAM technology
    Factor of form SO DIMM 200-pin
    Memory speed 533 MHz
    Verifying the integrity of data Non - ECC
    Latency CL4 Timings
    Features without buffer memory
    Supply voltage 1.8

    Thank you
    TREV

    Why not?

    Satellite P100 supports the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules of the series.

    You can switch to 4 GB max.

    See this page:

    [Memory for Toshiba Satellite P100-160 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28327&ft=m&st=3]

    You will find compatible module.

Maybe you are looking for

  • Download the update for Windows 10 1511 error

    This morning my computer running windows 10) tried to download and install the updated version of windows 10 1511. "Shortly after that the download starts, I get the following error. Error ox80070570 update files are missing or having a problem KB311

  • Alternative to iDVD on iMac El Capitan 10.11.1

    Hello Is there an alternative to iDVD. I have an iMac new with El Capitan 10.11.1 I see offers of Wondershare and iSkysoft.   They work properly?   Any experience with any of them?  The one that works best? Thanks in advance, Appelbum

  • dynamically create a table of containers

    Hello I'm am on 4.2 test bench and want to create an array of containers dynamically.  The number of containers comes from the unit I tested.  What are the steps needed to do this, the array element container contains 3 numbers and an ascii string.

  • When I try to access Google I get a not found message "404" this never happened before

    Same thing with 'Bling '.

  • ACL to restrict the SCP Protocol

    Dear Sir I want to allow the SCP Protocol on my Cisco devices (routers, switches, wap,...) for a single host (a server that backs up the configuration by SCP). But if I'm not mistaken, the SCP Protocol through the SSH protocol. So, do you know if it