Satellite P100: Multiprocessor is disabled in the BIOS v4.20

Similar Questions

• Re: Satellite P100-429 - how to upgrade the BIOS?

  How do install the BIOS after download as I canoe find the beginning of the installation in the downloaded files?

  Any help is appreciated as I am new on this.
  I have a Satellite P100-429 PSPA3E

  You must start the WinPhlash.exe file to start the update of the BIOS.

  In addition, here are some practical info on the update to the BIOS:
  http://www.toshiba-tro.de/biosinfo/

• Re: Satellite P100-106 - how to pass the BIOS?

  Hello

  I'm trying to downgrade the BIOS on my P100-106 of 4.80 to the 3.30 original but I don't have a copy of it. No matter who or where it is available?

  (Please note I looked already http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=P100&x=0&y=0 and these BIOS are NOT for the P100-106)

  your

  Hey,.

  It seems that you have a European model for laptop and so you need to download all the drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com

  But it seems that he not there no old version available for your laptop BIOS because you can download the newest one.
  You must contact an authorized service provider and ask the guy if you have an older version of BIOS.

  But why you want to downgrade it?

• Satellite P100-347 does not accept the BIOS password - it appears: invalid password

  Hello!

  I have a Toshiba P100 - 347. And yesterday I entered the password and now when I turn on the computer, it does not accept. It seems Setup information: password invalid.
  It's just after turn on, appears after the Toshiba logo.

  Can someone help me?

  Hello

  You used everything simply a bad BIOS password. Either you made, mixed with a few letters or for example buttons caps lock has been activated.
  Please check these possibilities.

  By the way; It of not possible to bypass the BIOS password unknown by yourself.
  If the BIOS password into the unknown, you will need to contact the ASP in your country to unlock the computer and remove the BIOS password.

• Satellite P100 PSPAD: could not update the BIOS 3.8 and a poor video performance

  Hello

  I have a video performance of bad quality on my machine as well as the fan power of the issues.

  To add to my frustration the WinPhlash program included in the BIOS version 3.8 empty out trying to flash which gives a PHLASHNT. SYS failed to load the message with different error codes (codes 5 and 147 depending if I launch the exe, as it is extracted from the ZIP, or run the files extracted independently).

  I checked all permissionings on the record and I definitely full control - but still a generic message of "check your accounts, if you do not have permissions please log in again!" is displayed.

  help with my problem of BIOS would be apreciated.

  [Edited by: admin on July 6, 2007 11:10]

  Hello

  but as the average it s absolutely the safest office upgrade firmware on at the level of the BACK. Or at least using the UBCD4Win, which is a beautiful cd live windows for maintenance.

  Welcome them

• Satellite P100 - impossible to get all the sounds

  Satellite P100

  When I updated the new driver for the card its conexant it cause its failure. I drove behind the driver, and then all is well again.
  Little pain and I've hidden the update.

  Toshiba has changed the hard drive and now I am totally unable to get any sound. The volume control is not the issue and the Device Manager shows no problems.
  All seem well except that I have no sound.

  Any help is welcome.

  Hello

  What operating system you use, and you have installed the laptop using the Toshiba Recovery disk?

  If you use Windows XP you have two install two hotfixes from the Microsoft Knowledge Base: KB835221 and KB888111.
  Two updates are integrated into SP3 and you need to install the patches first, and then the driver.

  In addition, you should try to install the latest driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least, make sure you use the latest version of the BIOS.

  Welcome them

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• CQ58Notebook PC, D0X10EA #ABU: AMD - V is disabled in the BIOS

  I downloaded Oracle Virtual Box 5.0.12 and SASUniversity Edition (a free statistical software package), I understand not working together. Both seem to be installed correctly. But when I press the 'Start' button in Virtual Box for running the SAS package, I get an error message:

  (VERR_SVM_DISABLED)

  AMD - V is disabled in the Bios

  E IN CASE OF FAILURE (0X80004005)

  This can be corrected? I thought that my BIOS can be updated, so I've just updated, version F.27 to F29, and the problem remains.

  Can I activate my AMD - V in the BIOS? If so, how? (In plain English please. I'm not very tech savvy, in which case you already guessed!)

  AMD - V is supported on the processor, so there should be a setting in the BIOS to enable it. Enter the BIOS by F10 you turn on.

• Display failed on the Satellite P100-434 - need to change the boot order

  Hello
  My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
  I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
  Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
  I think memory, it's F12 on first boot, but not sure after that.
  Running Windows 7 Home premium.
  Sorry for the lack of information, by making this post via my Nokia.

  > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

  Try F2 or esc (it can also be a delete key)

• cranking up xp proffesional sp3 it stops with error disk fail (40) in order to start it, it tells me to press f1, how to cure this problem ps disk is disabled in the bios

  operating system xp proffesional sp3 floppy disabled in bios but stops with the error message disk are still not (40) start the computer to the top when you press f1

  Hi petertomblin,

  I suggest you remove the floppy from the boot order in the BIOS (Basic Input Output System). Later, check to see if the problem persists.

  You can check again if the disk is disabled in the BIOS.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• Satellite A300: Option to "Wake on Wireless LAN" disabled in the BIOS

  Hello

  I have a laptop Satellite A300-230 and in the BIOS, the option (under Advanced) to toggle the * Wake on Wireless LAN * is disabled and grayed out with no way to change it.

  Why is it so? How can I activate it?

  BIOS version is 2.20 (later).

  Thank you all.

  Hello

  I have no idea why its grey in my case, I can enable and disable this option
  But I can do that too in utility Toshiba HWSetup located in all programs-> Toshiba Europe GmbH

  You can activate this using this tool?

• Satellite Pro U - BSOD when little Executive disable in the BIOS is set to

  Hello

  I hope someone can help - I 1.90 BIOS with Windows Server 2008 R2 installed with SP1 beta. Everything goes well until I put the Execute Disable bit in the BIOS, then I blusecreen to death...

  Clues?

  See you soon
  Warren

  Hey Buddy,

  Can I ask you why use Server 2008 on a laptop?
  And why with SP1 beta?

  In any case, before you start a lengthy discussion, it would be important to know which laptop you have.

• Satellite P100 - white screen on startup: No. BIOS!

  Hello

  I have a Satellite P100-286 (PSPAGE) I bought last year, and due to an unsuccessful attempt to update of the BIOS under Windows Vista, the laptop has more a BIOS. Is there anyway to Flash without sending the laptop somewhere?

  See you soon,.
  Andreas

  I doubt it. Once a BIOS is damaged, its cant boot or anything like that, so you can't reflash the BIOS. I guess that the motherboard would need replacement.

• Satellite P205D-4378 crashed so that the BIOS update

  Hello everyone,

  It is my first post on the forum, although I've read here a lot.

  My problem seems to be classic: had several problems with my Satellite P205D-4378 crash.
  Visited the Web from Toshiba site, they have a BIOS update that fixes the problems that I have. I do the update, CRAAAASH!, dead computer.

  Death seriously.

  Turn on the other computer, search, find a few websites on "crisis recovery disk Phoenix.

  I read religiously, run to the store, buy a FDD, some readers, usb, the Bios file download, rename, make the drive...

  Trembling with anxiety, I press FN + b, switch on the machine, and it works!

  Well well... at least the works of the Zombie fashion: pink LED, high speed fans, manages the USB FDD, begins the USB FDD, he read for a good two minutes! Then nothing.

  'It's ok, it'll be ok' I think. The starting block is a program that is not more than 4 k, the computer has no bios, impossible to use anything, and must digest a 1000 k bios.

  I wait, nothing happens.

  SO what now? I tried the 'start FDD' ten times at least. Last try, I waited all night! I Went sleep after the computer read the floppy).

  Whatever I do, once the disk has been read, nothing happens.

  I turn it off, I unplug it, I try with battery, no battery, I speak well, I insult, I pray, I cry, I swear... NOTHING WORKS!

  I do something wrong, somewhere.

  On my drive are the phlash16.exe, the minidos.sys and the bios.wph (extract from a file named AASA40. ROM, downloaded with the pack zip on the toshiba site)

  What should I do? I read it on some forums that computer makers like Dell and Compaq deliberately disable the Boot Block Flash, is the same thing with Toshiba?

  The latest version of the bios that I have downloaded is corrupted?

  Is it possible that my motherboard is physically by the update failed? In this case, is it easy to replace yourself?

  I don't want to be ripped off by Toshiba for repair, if the only thing that I miss so far is a combination of keys at the end of the flash Boot Block recovery...

  In short, I'm lost.

  No idea to this wonderful group of reflection?

  Thank you

  Baaharb.

  I think that the update of the BIOS based on windows is security more like an update of the traditional Bios.
  Why? Because using the traditional BIOS there is always a risk that the wrong BIOS would be used.
  The BIOS using focused on victory, this risk does not exist.

  I know a lot of people who uses a bad BIOS and damaged module BIOS ROM.

  Anyway. To show you, I think that there is one solution as mentioned by delvoie, you will have to contact the local ASP.

  See you soon

• Satellite P100-102 works badly since the installation of Vista

  Hello!

  I installed Windows Vista on my Toshiba p100-102 (A3E) but I had a 'small' problem. In each 3D app, I had a lot of shifts and slowdowns. I think it's a problem with the graphics card and I think the grapics card fan works slow since installing vista. Thus it reduces the mhz for a few moments (1 minute at) (I think, I'm not shure)

  so... anyone have any idea what I can do? Maybe should I use an alternativ graphics driver?

  SRY for my bad English = /.

  Oxford

  Hello

  did you properly installed all the drivers for your system? It s absoulutely necessary that everything is correctly installed and configured.
  Another thing is: Joanie to install the latest version of the bios, because I had a problem with my Satellite A100 after installation of Vista and I was able to solve it with my bios update.

  Regarding the graphics drivers, I can give you some links that might help you with your performance problems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Try these links and you will find drivers for your VGA. And please look carefully, a lot of people I have given the link tell me that they don t find anything, but the drivers are there.

  Welcome them